REVISIONS ASSEMBLED HEADER SHOWN FOR REFERENCE CIRCUIT BOARD HOLD LOCATIONS AND KEEP CLEAR AREAS FOR ATM13-12PX-12PX-BM01 ATM13-12PX-12PX-BM03 ALL DIMENSIONS REFERENCE TOP VIEW BOTTOM SIDE ONLY (17.6) 5 (19.2) 82.55 5 REV ECO A1 - A2 - A3 - DESCRIPTION BY APPR 06NOV18 SULLEN TOMMY UPDATED DRAWING 18FEB19 SULLEN TOMMY ADD AMPHENOL LOGO 08APR19 SULLEN TOMMY SECTION B-B 2.00 4.00 (117.6) 10.00 3.00 LABEL AREA B B (133.0) 2x O7.4 THRU FOR 1/4" OR 6mm FASTENER 80.00.5 12.00 114.01.0 7.5 4.20 2.45 8.40 12.60 6.35 16.80 21.00 9.00 16.00.5 VENT HOLE 101.60 HOLE FOR O1.04 PIN 12.00 (4x R3.00) 50.00.5 39.00.5 #4 [M3] SCREW LOCATION OPTIONAL 17.03 60.00.5 2x O16.0 25.00.5 15.0 ATM13-12PA-12PB-BM03 HEADER SHOWN FOR REFERENCE ONLY 30.00 118.81.0 POCKET FOR ADHESIVE VENT PATCH. (CUSTOMER SUPPLIED) 32.5+0.5 -1.5 34.75+0.5 -1.5 ARMOR IPX PCB ENCLOSURE,SHOWN WITH 24 PIN HEADER O3.00 FOR #4 [M3] SCREW 101.60.5 TITLE: KEEP CLEAR 4.41 DATE RELEASE NEW DRAWING (36.0) 5.00 DWG NO: 60.00 62.40.50 A VENT HOLE 84.60 2.0 PCB SLOT HEADER 7.00 AIPXE-325X4x-E016 44.00 0.7 PCB 105.50.5 19.00 14.00 PART NUMBER CHART PART NUMBER WITH VENT HOLES AIPXE-325X4A-E016 WITHOUT VENT HOLES AIPXE-325X4B-E016 3) Note reference = 2. THIS ENCLOSURE MATES WITH ATM13-12PX-12PX-BM0* HEADER.(X= A,B,C,D KEYS, *=ALL MODIFICATIONS) X SIGNATURES DRAWN: CHECKED: Amphenol DATE SULLEN.ZHANG 08APR19 ORION.LI 08APR19 Sine Systems - www.amphenol-sine.com 44724 Morley Drive Clinton Township, MI 48036 ENGINEER: APPROVAL: MATERIAL SPECIFICATIONS: TOMMY.XIE 08APR19 CUSTOMER: 3. RoHS COMPLIANT 4. ALL DIMENSIONS ARE FOR REFERENCE USE ONLY. 5. MAXIMUM COMPONENT HEIGHT DEPENDS ON LOCATION DUE TO PART DRAFT AND RIBS. 3D VIEW ATM13-12PX-12PX-BM01 AND ATM13-12PX-12PX-BM03 HEADER AND MOUNTING HARDWARE SHOWN FOR REFERENCE PROCESS SPECIFICATIONS: ITEM THIS DRAWING IS SUPPLIED FOR INFORMATION ONLY. DESIGN FEATURES, SPECIFICATIONS AND PERFORMANCE DATA SIZE SHOWN HEREON ARE THE PROPERTY OF THE AMPHENOL CORPORATION. NO RIGHTS OF REPRODUCTION ARE IMPLIED. ALL DIMENSIONS ARE SUBJECT TO NORMAL SCALE: MANUFACTURING VARIATIONS. ARMOR IPX PCB ENCLOSURE, SHOWN WITH 24 PIN HEADER TYPE DWG NO: REVISION B C- AIPXE-325X4x-E016 A3 NEXT ASS'Y: NONE SHEET 1 OF 1 1 1) All dimensions are in metric(mm). 2) Tolerances are as follows: 1 PL DEC 0.30 Fractions 1/64 2 PL DEC 0.15 Angles 1 3 PL DEC 0.08 1. MATERIAL:NATURAL ULTEM OF: SEE PART NUMBER CHART DESCRIPTION PART NUMBER QUANTITY MATERIALS LIST UNLESS OTHERWISE SPECIFIED NOTES: UNLESS OTHERWISE SPECIFIED 1 SECTION A-A SH: LABEL A VENT HOLE LABEL A3 THREE DIMENSIONAL SPACE LIMIT APPROXIMATE INTERNAL SPACE FOR COMPONENT SPACE LAYOUT MAX. COMPONENT HEIGHT UNDER BOARD 2.00 mm. REV: ENCLOSURE