DSP 45-16AR VRRM = 1600 V IF(RMS) = 2x70 A IF(AV)M = 2x45 A Phase-leg Rectifier Diode VRSM VRRM V V 1700 1600 1 Type 2 3 ISOPLUS247TM 1 2 DSP 45-16AR TAB 3 1 = Cathode, 2 = Anode/Cathode, 3 = Anode Symbol Conditions IF(RMS) IF(AV)M TVJ = TVJM TC = 100C; 180 sine IFSM TVJ = 45C; I2t Maximum Ratings Features / Advantages * Planar passivated chips * Very low leakage current * Very low forward voltage drop * Improved thermal behaviour 70 43 A A t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 480 510 A A TVJ = 150C; t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 420 450 A A t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 1150 1090 A2s A2s * Diode for main rectification * For single and three phase bridge configuration TVJ = 150C; t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 880 855 A2s A2s Package -40...+150 +150 -40...+150 C C C 20...120 N 3000 V~ 6 g TVJ = 45C TVJ TVJM Tstg FC Clip mounting force VISOL 50/60 Hz, RMS, t = 1 minute, leads-to-tab Weight Symbol Conditions IR TVJ = 150C VR = VRRM < 3 mA VF IF = 40 A; TVJ = 25C < 1.23 V VT0 rT For power-loss calculations only TVJ = TVJM 0.8 11 V m RthJC RthCH DC current DC current (with heatsink compound) 0.7 0.2 K/W K/W a Maximum allowable acceleration 50 m/s2 Applications * Industry standard outline * DCB isolated backside * Isolation voltage 3000 V * Epoxy meets UL 94V-0 * UL registered E72873 * RoHS compliant Characteristic Values Data according to IEC 60747 and refer to a single diode IXYS reserves the right to change limits, test conditions and dimensions 20090528b 1-2 (c) 2009 IXYS All rights reserved http://store.iiic.cc/ DSP 45-16AR ISOPLUS247TM The convex bow of substrate is typ. < 0.04 mm over plastic surface level of device bottom side This drawing will meet all dimensions requirement of JEDEC outline TO-247 AD except screw hole and except Lmax. IXYS reserves the right to change limits, test conditions and dimensions 20090528b 2-2 (c) 2009 IXYS All rights reserved http://store.iiic.cc/