Ordering number:ENN3715 PNP/NPN Epitaxial Planar Silicon Transistors 2SB1509/2SD2282 High-Current Switching Applications Applications Package Dimensions * Relay drivers, high-speed inverters, converters. unit:mm 2039D Features [2SB1509/2SD2282] * Low collector-to-emitter saturation voltage : VCE(sat)=-0.5V max. * Wide ASO and highly registant to breakdown. * Micaless package facilitating easy mounting. 16.0 3.4 5.6 2.0 21.0 22.0 5.0 8.0 3.1 2.0 20.4 4.0 2.8 2.0 1.0 0.6 2 3 1 : Base 2 : Collector 3 : Emitter SANYO : TO-3PML 3.5 1 ( ) : 2SB1509 5.45 Specifications 5.45 Absolute Maximum Ratings at Ta = 25C Parameter Symbol Collector-to-Base Voltage Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current Collector Current (Pulse) Conditions Ratings Unit VCBO VCEO (-)60 V (-)50 V VEBO IC (-)6 V (-)15 A ICP (-)30 A 3.0 W Collector Dissipation PC Junction Temperature Tj Storage Temperature Tstg Tc=25C 50 W 150 C -55 to +150 C Electrical Characteristics at Ta = 25C Parameter Symbol Collector Cutoff Current ICBO Emitter Cutoff Current IEBO hFE1 DC Current Gain hFE2 Gain-Bandwidth Product fT Conditions Ratings min typ VCB=(-)40V, IE=0 VEB=(-)4V, IC=0 VCE=(-)2V, IC=(-)1A VCE=(-)2V, IC=(-)8A VCE=(-)5V, IC=(-)1A 70* max Unit 0.1 mA 0.1 mA 280* 30 * : The 2SB1509/2SD2282 are classified by 1A hFE as follows : 20 MHz Continued on next page. Rank Q R S hFE 70 to 140 100 to 200 140 to 280 Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 51304TN (PC)/N1098HA (KT)/5111MH, JK (KOTO) No.3715-1/4 2SB1509/2SD2282 Continued from preceding page. Parameter Symbol Collector-to-Emitter Saturation Voltage Ratings Conditions VCE(sat) min typ IC=(-)8A, IB=(-)0.4A Unit max (-0.26) (-0.5) V 0.18 0.4 V Collector-to-Base Breakdown Voltage V(BR)CBO IC=(-)1mA, IE=0 (-)60 V Collector-to-Emitter Breakdown Voltage V(BR)CEO IC=(-)1mA, RBE= V(BR)EBO IE=(-)1mA, IC=0 (-)50 V Emitter-to-Base Breakdown Voltage (-)6 Turn-ON Time ton See specified test circuit. Storage Time tstg See specified test circuit. tf See specified test circuit. Fall Time V 0.2 s (0.5) s 1.0 s 0.1 s Switching Time Test Circuit IB1 PW=20s tr, tf15ns IB2 1 INPUT OUTPUT RB VR 50 RL 10 100 + + 100F 470F --5V 20V 10IB1= --10IB2=IC=2A (For PNP, the porarity is reversed.) IC -- VCE --20 --1A mA --600 --200mA --100mA --80mA --16 --14 --12 --60mA --10 --40mA --8 --20mA --6 --2 0 --0.2 --0.4 --0.6 --0.8 --1.0 --1.2 --1.4 --1.6 --1.8 14 80mA 12 60mA 10 40mA 8 20mA 6 0 --2.0 IB=0 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 Collector-to-Emitter Voltage, VCE - V ITR09855 IC -- VBE(on) --20 2.0 ITR09856 IC -- VBE(on) 20 2SB1509 VCE= --2V 2SD2282 VCE=2V 16 Collector Current, IC - A --16 Collector Current, IC - A 200mA 16 2 IB=0 Collector-to-Emitter Voltage, VCE - V --12 --8 --4 0 600mA 1A 4 --4 0 2SD2282 18 Collector Current, IC - A Collector Current, IC - A --18 IC -- VCE 20 2SB1509 0 --0.2 --0.4 --0.6 --0.8 --1.0 --1.2 Base-to-Emitter Voltage, VBE(ON) - V --1.4 ITR09857 12 8 4 0 0 0.2 0.4 0.6 0.8 1.0 1.2 Base-to-Emitter Voltage, VBE(ON) - V 1.4 ITR09858 No.3715-2/4 2SB1509/2SD2282 hFE -- IC 1000 2SB1509 5 5 3 3 2 100 5 5 3 2 2 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 5 10 7 --10 2 3 ITR09859 2 3 5 7 0.1 2 3 5 7 1.0 2 3 5 7 10 Collector Current, IC - A VCE(sat) -- IC 3 2 2 3 ITR09860 VCE(sat) -- IC 10 2SB1509 2SD2282 5 --10 Collector-to-Emitter Saturation Voltage, VCE (sat) - V Collector-to-Emitter Saturation Voltage, VCE (sat) - V 7 3 Collector Current, IC - A 5 3 2 3 2 1.0 --1.0 5 3 2 5 3 2 0.1 --0.1 I C / I B=20 5 3 2 I C / I B=10 --0.01 --0.01 2 3 5 --0.1 2 3 5 --1.0 2 3 5 2 --10 Collector Current, IC - A 3 5 2SB1509 3 2 --10 7 5 3 2 IC / IB=10, 20 7 5 3 IC / IB=20 3 2 0.01 0.01 IC 2 3 5 2 3 0.1 2 1.0 2 3 5 2 3 10 5 ITR09862 VBE(sat) -- IC 100 2SD2282 7 5 3 2 10 7 5 3 2 1.0 IC / IB=10, 20 7 3 5 7 --0.1 2 3 5 7 --1.0 2 3 3 5 7 --10 2 3 A ITR09863 2 3 5 7 0.1 2 3 2 3 5 --10 Collector Current, IC - A 2 1.0 n tio --1.0 3 era op on i rat 5 5 3 2 2SD2282 100s to 100ms : Single pulse Tc=25C 0.1 2 3 Collector-to-Emitter Voltage, VCE - V 5 --100 ITR09865 s 0 50 s 1m s 2SB1509 100s to 100ms : Single pulse Tc=25C --0.1 5 DC 0m e op 3 2 IC=15A 10 ms 10 DC 5 5 7 10 2 3 ITR09864 PT200s s s 2 3 2 10 m 10 3 --1.0 3 ICP=30A 0m 1m IC=-15A 5 2 10 s 0 50 s 2 --10 7 1.0 ASO 5 PT100s 200s ICP=-30A 3 5 Collector Current, IC - A ASO 5 Collector Current, IC - A 5 5 Collector Current, IC - 5 =10 / IB Collector Current, IC - A Base-to-Emitter Saturation Voltage, VBE (sat) - V 7 5 --1.0 5 ITR09861 VBE(sat) -- IC --100 Base-to-Emitter Saturation Voltage, VBE (sat) - V 2 100 7 10 VCE=2V 2SD2282 7 DC Current Gain, hFE DC Current Gain, hFE 7 hFE -- IC 1000 VCE= --2V 5 5 1.0 2 3 5 10 2 3 5 Collector-to-Emitter Voltage, VCE - V 100 ITR09866 No.3715-3/4 2SB1509/2SD2282 PC -- Ta 3.2 3.0 PC -- Ta 60 2SB1509 / 2SD2282 2SB1509 / 2SD2282 Collector Dissipation, PC - W Collector Dissipation, PC - W 2.8 2.4 N o 2.0 he at sin k 1.6 1.2 0.8 50 40 30 20 10 0.4 0 0 20 40 60 80 100 120 Ambient Temperature, Ta - C 140 160 ITR09867 0 0 20 40 60 80 100 120 140 Ambient Temperature, Ta - C 160 ITR09868 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of May, 2004. Specifications and information herein are subject to change without notice. PS No.3715-4/4