19-2646; Rev 3; 1/12 50, Low-Voltage, Quad SPST/Dual SPDT Analog Switches in WLP The MAX4747-MAX4750 low-voltage, quad single-pole single-throw (SPST)/dual single-pole/double-throw (SPDT) analog switches operate from a single +2V to +11V supply and handle rail-to-rail analog signals. These switches exhibit low leakage current (0.1nA) and consume less than 0.5nW (typ) of quiescent power, making them ideal for battery-powered applications. When powered from a +3V supply, these switches feature 50 (max) on-resistance (RON), with 3.5 (max) matching between channels and 9 (max) flatness over the specified signal range. The MAX4747 has four normally open (NO) switches, the MAX4748 has four normally closed (NC) switches, and the MAX4749 has two NO and two NC switches. The MAX4750 has two SPDT switches. These switches are available in 14-pin TSSOP, 16-pin TQFN (4mm x 4mm), and 16-bump WLP packages. This tiny chip-scale package occupies a 2mm 2mm area and significantly reduces the required PC board area. Applications Battery-Powered Systems Audio/Video-Signal Routing Low-Voltage Data-Acquisition Systems Cell Phones Communications Circuits Glucose Meters PDAs Features o 2mm 2mm WLP o Guaranteed On-Resistance (RON) 25 (max) at +5V 50 (max) at +3V o On-Resistance Matching 3 (max) at +5V 3.5 (max) at +3V o Guaranteed < 0.1nA Leakage Current at TA = +25C o Single-Supply Operation from +2.0V to +11V o TTL/CMOS-Logic Compatible o -84dB Crosstalk (1MHz) o -72dB Off-Isolation (1MHz) o Low Power Consumption: 0.5nW (typ) o Rail-to-Rail Signal Handling Ordering Information MAX4747EUD+ TEMP RANGE -40C to +85C PIN-/BUMPPACKAGE 14 TSSOP MAX4747ETE+ -40C to +85C 16 Thin QFN-EP* MAX4747EWE+T -40C to +85C 16 WLP PART *EP = Exposed pad. +Denotes a lead(Pb)-free/RoHS-compliant package. T = Tape and reel. Ordering Information continued at end of data sheet. Pin/Bump Configurations/Truth Tables TOP VIEW (BUMPS SIDE DOWN) TOP VIEW NO1 V+ N.C. IN1 + MAX4747 16 15 14 13 MAX4747 + COM1 1 12 IN4 NO2 2 11 NO4 10 *EP 5 6 7 8 NO3 N.C. 4 GND IN2 MAX4747ETE 3 IN3 COM2 TQFN *CONNECT EP TO V+ 9 COM4 COM3 NO1 1 14 V+ COM1 2 13 IN1 NO2 3 12 IN4 COM2 4 10 COM4 IN3 6 9 COM3 GND 7 8 NO3 2 3 4 COM1 NO2 COM2 IN2 NO1 V+ A IN3 B 11 NO4 IN2 5 1 IN1 GND NO3 COM4 COM3 C IN4 NO4 D TSSOP WLP INPUT LOW SWITCH STATE OFF HIGH ON Pin Configurations/Truth Tables continued at end of data sheet. ________________________________________________________________ Maxim Integrated Products For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at 1-888-629-4642, or visit Maxim's website at www.maxim-ic.com. 1 MAX4747-MAX4750 General Description MAX4747-MAX4750 50, Low-Voltage, Quad SPST/Dual SPDT Analog Switches in WLP ABSOLUTE MAXIMUM RATINGS (All voltages referenced to GND.) V+ ...........................................................................-0.3V to +12V IN_, COM_, NO_, NC_ (Note 1)....................-0.3V to (V+ + 0.3V) Continuous Current (any pin) ...........................................10mA Peak Current (any pin, pulsed at 1ms, 10% duty cycle) ...20mA Continuous Power Dissipation (TA = +70C) 14-Pin TSSOP (derate 9.1mW/C above +70C) .........727mW 16-Pin Thin QFN (derate 16.9mW/C above +70C) .....1349mW 16-Bump WLP (derate 7.3mW/C above +70C).........589mW Operating Temperature Range ...........................-40C to +85C Storage Temperature Range .............................-65C to +150C Maximum Junction Temperature .....................................+150C Bump Temperature (soldering) Infrared (15s) ...............................................................+220C Vapor Phase (60s) .......................................................+215C Lead Temperature (soldering, 10s) .................................+300C Soldering Temperature (reflow) .......................................+260C Note 1: Signals on IN_, NO_, NC_, or COM_ exceeding V+ or GND are clamped by internal diodes. Limit forward-diode current to maximum current rating. Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. ELECTRICAL CHARACTERISTICS--Single +3V Supply (V+ = +3V 10%, VIH = +2.0V, VIL = +0.8V, TA = TMIN to TMAX, unless otherwise noted. Typical values are at V+ = +3V, TA = +25C.) (Notes 3, 4) PARAMETER SYMBOL CONDITIONS TA MIN TYP MAX UNITS V+ V ANALOG SWITCH Analog Signal Range VCOM_, VNO_, VNC_ 0 +25C 17 50 RON V+ = +2.7V, ICOM_ = 5mA, VNO_ or VNC_ = +1.5V On-Resistance Matching Between Channels (Notes 5, 6) RON V+ = +2.7V, ICOM_ = 5mA, VNO_ or VNC_ = +1.5V On-Resistance Flatness (Note 7) RFLAT(ON) V+ = +2.7V, ICOM_ = 5mA, VNO_ or VNC_ = +1V, +1.5V, +2V -0.1 +0.1 INO_(OFF), INC_(OFF) V+ = +3.6V, VCOM_ = +0.3V, +3V, VNO_ or VNC_ = +3V, +0.3V +25C NO_ or NC_ Off-Leakage Current (Note 8) TMIN to TMAX -2 +2 V+ = +3.6V, ICOM_(OFF) VCOM_ = +0.3V, +3V, VNO_ or VNC_ = +3V, +0.3V +25C -0.1 +0.1 COM_ Off-Leakage Current (Note 8) TMIN to TMAX -2 +2 +25C -0.2 +0.2 On-Resistance TMIN to TMAX 60 +25C 0.2 TMIN to TMAX COM_ On-Leakage Current (Note 8) 2 ICOM_(ON) V+ = +3.6V, VCOM_ = +0.3V, +3.0V, VNO_ or VNC_ = +0.3V, +3V, or unconnected 3.5 4.5 +25C 2.7 TMIN to TMAX 9 11 nA nA nA TMIN to TMAX -4 _______________________________________________________________________________________ +4 50, Low-Voltage, Quad SPST/Dual SPDT Analog Switches in WLP (V+ = +3V 10%, VIH = +2.0V, VIL = +0.8V, TA = TMIN to TMAX, unless otherwise noted. Typical values are at V+ = +3V, TA = +25C.) (Notes 3, 4) PARAMETER SYMBOL CONDITIONS TA MIN TYP MAX 57 150 UNITS DYNAMIC +25C Turn-On Time tON VNO_ or VNC_ = +1.5V, RL = 300, CL = 35pF, Figure 2 Turn-Off Time tOFF VNO_ or VNC_ = +1.5V, RL = 300, CL = 35pF, Figure 2 Break-Before-Make (MAX4749/MAX4750 Only) (Note 8) tBBM VNO_ or VNC_ = +1.5V, RL = 300, CL = 35pF, Figure 3 TMIN to TMAX 170 +25C Charge Injection 24 TMIN to TMAX Q 60 70 +25C TMIN to TMAX ns ns 33 ns 1 VGEN = 0V, RGEN = 0, CL = 1.0nF, +25C Figure 4 7 pC On-Channel -3dB Bandwidth BW Signal = 0dBm, 50 in and out +25C 250 MHz Off-Isolation (Note 9) VISO f = 1MHz, VNO_ = 1VRMS, RL = 50, CL = 5pF, Figure 5 +25C -72 dB Crosstalk (Note 10) VCT f = 1MHz, VNO_ = 1VRMS, RL = 50, CL = 5pF, Figure 6 +25C 84 dB NO_ or NC_ Off-Capacitance f = 1MHz, Figure 7 +25C 20 pF COM_ Off-Capacitance CCOM_(OFF) f = 1MHz, Figure 7 COFF +25C 20 pF COM_ On-Capacitance CCOM_(ON) f = 1MHz, Figure 7 +25C 40 pF LOGIC INPUT Input Logic High VIH Input Logic Low VIL Input Leakage Current IIN 1.4 VIN_ = 0V or V+ -1 V +0.005 0.8 V +1 A 11 V 1 A POWER SUPPLY Power-Supply Range V+ Positive Supply Current I+ 2 V+ = +5.5V, VIN_ = 0V or V+, all switches on or off 0.0001 _______________________________________________________________________________________ 3 MAX4747-MAX4750 ELECTRICAL CHARACTERISTICS--Single +3V Supply (continued) MAX4747-MAX4750 50, Low-Voltage, Quad SPST/Dual SPDT Analog Switches in WLP ELECTRICAL CHARACTERISTICS--Single +5V Supply (V+ = +5V 10%, VIH = +2.0V, VIL = +0.8V, TA = TMIN to TMAX, unless otherwise noted. Typical values are at V+ = +5V, TA = +25C.) (Notes 3, 4) PARAMETER SYMBOL CONDITIONS TA MIN TYP MAX UNITS V+ V ANALOG SWITCH Analog Signal Range On-Resistance VCOM_, VNO_, VNC_ RON 0 V+ = +4.5V, ICOM_ = 5mA, VNO_ or VNC_ = +3.0V +25C 8.2 TMIN to TMAX 25 30 +25C 0.1 3 On-Resistance Matching Between Channels (Notes 5, 6) RON On-Resistance Flatness (Notes 7) RFLAT(ON) V+ = +4.5V, ICOM_ = 5mA, VNO_ or VNC_ = +1V, +2V, +3V -0.1 +0.1 INO_(OFF), INC_(OFF) V+ = +5.5V, VCOM_ = +1V, +4.5V, VNO_ or VNC_ = +4.5V, +1V +25C NO_ or NC_ Off-Leakage Current (Note 8) TMIN to TMAX -2 +2 V+ = +5.5V, ICOM_(OFF) VCOM_ = +1V, +4.5V, VNO_ or VNC_ = +4.5V, +1V +25C -0.1 +0.1 COM_ Off-Leakage Current (Note 8) TMIN to TMAX -2 +2 +25C -0.2 +0.2 TMIN to TMAX -4 +4 V+ = +4.5V, ICOM_ = 5mA, VNO_ or VNC_ = +3.0V TMIN to TMAX 4 +25C COM_ On-Leakage Current (Note 8) ICOM_(ON) V+ = +5.5V, VCOM_ = +1V, +4.5V, VNO_ or VNC_ = +1V, +4.5V, or unconnected 2.2 TMIN to TMAX 5 7 nA nA nA DYNAMIC +25C 36 85 Turn-On Time tON VNO_ or VNC_ = +3.0V, RL = 300, CL = 35pF, Figure 2 Turn-Off Time tOFF VNO_ or VNC_ = +3.0V, RL = 300, CL = 35pF, Figure 2 Break-Before-Make (MAX4749/MAX4750 Only) (Note 8) tBBM VNO_ or VNC_ = +3.0V, RL = 300, CL = 35pF, Figure 3 Q VGEN = 0V, RGEN = 0, CL = 1.0nF, Figure 4 +25C 9 pC Charge Injection TMIN to TMAX 95 +25C 19 TMIN to TMAX TMIN to TMAX 45 55 +25C ns ns 14 ns 1 On-Channel -3dB Bandwidth BW Signal = 0dBm, 50 in and out +25C 250 MHz Off-Isolation (Note 9) VISO f = 1MHz, VNO_= 1VRMS, RL = 50, CL = 5pF, Figure 5 +25C -72 dB 4 _______________________________________________________________________________________ 50, Low-Voltage, Quad SPST/Dual SPDT Analog Switches in WLP (V+ = +5V 10%, VIH = +2.0V, VIL = +0.8V, TA = TMIN to TMAX, unless otherwise noted. Typical values are at V+ = +5V, TA = +25C.) (Notes 3, 4) PARAMETER SYMBOL Crosstalk (Note 10) VCT NO_ or NC_ Off-Capacitance COFF CONDITIONS TA MIN TYP MAX UNITS f = 1MHz, VNO_ = 1VRMS, RL = 50, CL = 5pF, Figure 6 +25C -84 dB f = 1MHz, Figure 7 +25C 20 pF COM_ Off-Capacitance CCOM_(OFF) f = 1MHz, Figure 7 +25C 20 pF COM_ On-Capacitance CCOM_(ON) f = 1MHz, Figure 7 +25C 40 pF LOGIC INPUT Input Logic High VIH Input Logic Low VIL Input Leakage Current IIN 2 VIN_ = 0V or V+ V -1 +0.005 0.8 V +1 A 11 V 1 A POWER SUPPLY Power-Supply Range V+ Positive Supply Current I+ 2 V+ = +5.5V, VIN_ = 0V or V+, all switches on or off 0.0001 The algebraic convention, where the most negative value is a minimum and the most positive value a maximum, is used in this data sheet. Note 4: WLP parts are 100% tested at +25C only, and are guaranteed by design over temperature. TSSOP and Thin QFN parts are 100% tested at +85C and guaranteed by design over temperature. Note 5: RON = RON(MAX) - RON(MIN). Note 6: WLP and Thin QFN on-resistance matching between channels is guaranteed by design. Note 7: Flatness is defined as the difference between the maximum and minimum value of on-resistance as measured over the specified analog signal range. Note 8: Guaranteed by design. Note 9: Off-isolation = 20 log10 (VNO_/VCOM_), VNO_ = output, VCOM_ = input to off switch. Note 10: Between any two switches. Note 3: Typical Operating Characteristics (TA = +25C, unless otherwise noted.) V+ = 5V TA = +85C 12 8 TA = +25C TA = +85C 20 RON () 30 V+ = 3V 25 TA = +25C RON () RON () V+ = 2V 30 MAX4747-50-toc02 MAX4747-50-toc01 40 ON-RESISTANCE vs. VCOM ON-RESISTANCE vs. VCOM 16 MAX4747-50-toc03 ON-RESISTANCE vs. VCOM 50 15 20 V+ = 3V 10 10 TA = -40C 4 V+ = 5V TA = -40C 5 V+ = 11V 0 0 0 0 2 4 6 VCOM (V) 8 10 12 0 1 2 3 VCOM (V) 4 5 0 0.5 1.0 1.5 2.0 2.5 3.0 VCOM (V) _______________________________________________________________________________________ 5 MAX4747-MAX4750 ELECTRICAL CHARACTERISTICS--Single +5V Supply (continued) Typical Operating Characteristics (continued) (TA = +25C, unless otherwise noted.) SUPPLY CURRENT vs. TEMPERATURE TA = -40C 10 0 1.0 1.5 2.0 2.5 -15 VCOM (V) 10 35 60 -40 85 IN LOGIC THRESHOLD vs. SUPPLY VOLTAGE FREQUENCY RESPONSE 2.5 2.0 1.5 1.0 MAX4747-50-toc08 -20 LOSS -30 -40 -50 -60 OFFISOLATION -70 60 50 PHASE CROSSTALK -110 0.01 0 2 4 6 8 10 12 0.1 1 TURN-ON/OFF TIME vs. TEMPERATURE 100 V+ = 3V 0 1000 0 30 4 6 8 10 12 VCOM (V) TOTAL HARMONIC DISTORTION vs. FREQUENCY VNO = V+/2 100 tON 80 2 1 SOURCE AND LOAD = 600 VCOM = 2VP-P V+ = 3V 0.1 THD (%) tON, V+ = 5V 40 20 10 120 TURN-ON/OFF TIME (ns) MAX4747-50-toc10 70 tON, V+ = 3V V+ = 5V TURN-ON/OFF TIME vs. SUPPLY VOLTAGE 80 50 30 FREQUENCY (MHz) SUPPLY VOLTAGE (V) 60 40 10 -100 0.5 V+ = 11V 20 -80 -90 85 CHARGE INJECTION vs. VCOM -10 GAIN (dB)/PHASE (DEGREES) 3.0 MAX4747-50-toc07 VNO_ = V+ 3.5 60 35 10 TEMPERATURE (C) 0 0 -15 TEMPERATURE (C) 4.0 MAX4747-50-toc06 0.01 -40 CHARGE (pC) 0.5 OFF 0.1 0.1 0 LOGIC THRESHOLD (V) ON 1 1 5 60 tOFF V+ = 5V 0.01 40 tOFF, V+ = 3V tOFF, V+ = 5V 20 10 0 0.001 0 -40 -15 10 35 TEMPERATURE (C) 6 10 MAX4747-50-toc09 10 100 V+ = 5V, VCOM = 4.5V, NO_ or NC_ = UNCONNECTED MAX4747-50 toc12 15 100 MAX4747-50-toc11 RON () 20 V+ = 3V, 5V 1000 SUPPLY CURRENT (pA) TA = +85C 25 MAX4747-50-toc05 V+ = 2.5V TA = +25C LEAKAGE vs. TEMPERATURE 10,000 MAX4747-50-toc04 30 LEAKAGE CURRENT (pA) ON-RESISTANCE vs. VCOM TURN-ON/OFF TIME (ns) MAX4747-MAX4750 50, Low-Voltage, Quad SPST/Dual SPDT Analog Switches in WLP 60 85 0 2 4 6 8 SUPPLY VOLTAGE (V) 10 12 0.01 0.1 1 FREQUENCY (kHz) _______________________________________________________________________________________ 10 100 50, Low-Voltage, Quad SPST/Dual SPDT Analog Switches in WLP PIN MAX4747 NAME FUNCTION MAX4748 MAX4749 MAX4750 1, 3, 8, 11 -- -- -- NO1-NO4 Analog-Switch Normally Open Terminals -- 1, 3, 8, 11 -- -- NC1-NC4 Analog-Switch Normally Closed Terminals -- -- 1, 8 -- NO1, NO3 Analog-Switch Normally Open Terminals -- -- -- 1, 8 NO1, NO2 Analog-Switch Normally Open Terminals -- -- -- 4, 11 NC1, NC2 Analog-Switch Normally Closed Terminals -- -- 3, 11 -- NC2, NC4 Analog-Switch Normally Closed Terminals 2, 4, 9, 10 2, 4, 9, 10 2, 4, 9, 10 -- COM1-COM4 -- -- -- 2, 9 COM1, COM2 13, 5, 6, 12 13, 5, 6, 12 13, 5, 6, 12 -- IN1-IN4 Logic-Control Digital Input -- -- -- 13, 6 IN1, IN2 Logic-Control Digital Input 7 7 7 7 GND 14 14 14 14 V+ -- -- -- 3, 5, 10, 12 N.C. Analog-Switch Common Terminal Analog-Switch Common Terminal Ground. Connect to digital ground. Positive Analog and Digital Supply Voltage Input. Internally connected to substrate. No Connection. Not internally connected. Bump Description--WLP PIN MAX4747 NAME FUNCTION MAX4748 MAX4749 MAX4750 B1, A2, C4, D2 -- -- -- NO1-NO4 Analog-Switch Normally Open Terminals -- B1, A2, C4, D2 -- -- NC1-NC4 Analog-Switch Normally Closed Terminals -- -- B1, C4 -- NO1, NO3 Analog-Switch Normally Open Terminals -- -- -- B1, C4 NO1, NO2 Analog-Switch Normally Open Terminals -- -- -- A3, D2 NC1, NC2 Analog-Switch Normally Closed Terminals Analog-Switch Normally Closed Terminals -- -- A2, D2 -- NC2, NC4 A1, A3, D4, D3 A1, A3, D4, D3 A1, A3, D4, D3 -- COM1-COM4 Analog-Switch Common Terminal -- -- -- A1, D4 COM1, COM2 C1, A4, B4, D1 C1, A4, B4, D1 C1, A4, B4, D1 -- IN1-IN4 Logic-Control Digital Input Analog-Switch Common Terminal -- -- -- C1, B4 IN1, IN2 Logic-Control Digital Input C3 C3 C3 C3 GND B2 B2 B2 B2 V+ -- -- -- A2, A4, D1, D3 N.C. Ground. Connect to digital ground. Positive Analog and Digital Supply Voltage Input. Internally connected to substrate. No Connection. Not internally connected. _______________________________________________________________________________________ 7 MAX4747-MAX4750 Pin Description--TSSOP 50, Low-Voltage, Quad SPST/Dual SPDT Analog Switches in WLP MAX4747-MAX4750 Pin Description--TQFN-EP PIN 8 NAME MAX4747 MAX4748 MAX4749 MAX4750 1, 3 1, 3 1, 3 1, 9 COM1, COM2 2 -- -- 7 NO2 4, 13 4, 13 4, 13 5, 13 IN2, IN1 5, 12 5, 12 5, 12 -- IN3, IN4 6 6 6 6 GND FUNCTION Analog-Switch Common Terminals Analog-Switch Normally Open Terminal Logic-Control Digital Inputs Logic-Control Digital Inputs Ground. Connect to digital ground. 7 -- 7 -- NO3 Analog-Switch Normally Open Terminal 8, 14 8, 14 8, 14 2, 4, 8, 10, 12, 14 N.C. No Connection. Not internally connected. 9, 10 9, 10 9, 10 -- COM3, COM4 Analog-Switch Common Terminals 11 -- -- -- NO4 15 15 15 15 V+ Analog-Switch Normally Open Terminal 16 -- 16 16 NO1 Analog-Switch Normally Open Terminal -- 2 2 11 NC2 Analog-Switch Normally Closed Terminal -- 7 -- -- NC3 Analog-Switch Normally Closed Terminal -- 11 11 -- NC4 Analog-Switch Normally Closed Terminal -- 16 -- 3 NC1 Analog-Switch Normally Closed Terminal -- -- -- -- EP Positive Supply-Voltage Input Exposed Pad. Connect EP to V+. _______________________________________________________________________________________ 50, Low-Voltage, Quad SPST/Dual SPDT Analog Switches in WLP Test Circuits/Timing Diagrams Operating Considerations for High-Voltage Supply The MAX4747-MAX4750 operate to +11V with some precautions. The absolute maximum rating for V+ is +12V (referenced to GND). When operating near this region, bypass V+ with a minimum 0.1F capacitor to ground as close to the IC as possible. V+ D1 EXTERNAL BLOCKING DIODE MAX4747- MAX4750 V+ * * NO_ COM_ Logic Levels The MAX4747-MAX4750 are TTL compatible when powered from a single +3V supply. When powered from other supply voltages, the logic inputs should be driven rail-to-rail. For example, with a +11V supply, IN_ should be driven low to 0V and high to 11V. With a +3.3V supply, IN_ should be driven low to 0V and high to 3.3V. Driving IN_ rail-to-rail minimizes power consumption. Analog Signal Levels Analog signals that range over the entire supply voltage (GND to V+) pass with very little change in RON (see the Typical Operating Characteristics). The bidirectional switches allow NO_, NC_, and COM_ connections to be used as either inputs or outputs. Power-Supply Sequencing and Overvoltage Protection CAUTION: Do not exceed the absolute maximum ratings. Stresses beyond the listed ratings can cause permanent damage to the devices. Proper power-supply sequencing is recommended for all CMOS devices. Always apply V+ before applying analog signals, especially if the analog signal is not current limited. If this sequencing is not possible, and if the analog inputs are not current limited to < 20mA, add small-signal diode D1 as shown in Figure 1. If the analog signal can dip below GND, add D2. Adding protection diodes reduces the analog signal range to a diode drop (about 0.7V) below V+ (for D1), and to a diode drop above ground (for D2). Leakage is unaffected by adding the diodes. On-resistance increases slightly at low supply voltages. Maximum supply voltage (V+) must not exceed +11V. * * GND EXTERNAL BLOCKING DIODE D2 GND *INTERNAL PROTECTION DIODES Figure 1. Overvoltage Protection Using External Blocking Diodes Adding protection diodes causes the logic thresholds to be shifted relative to the power-supply rails. The most significant shift occurs when using low supply voltages (+5V or less). With a +5V supply, TTL compatibility is not guaranteed when protection diodes are added. Driving IN_ and IN_ all the way to the supply rails (i.e., to a diode drop higher than the V+ pin, or to a diode drop lower than the GND pin) is always acceptable. Protection diodes D1 and D2 also protect against some overvoltage situations. Using the circuit in Figure 1, no damage results if the supply voltage is below the absolute maximum rating (+12V) and if a fault voltage up to the absolute maximum rating (V+ + 0.3V) is applied to an analog signal terminal. WLP Applications Information For the latest application details on WLP construction, dimensions, tape carrier information, PC board techniques, bump-pad layout, and recommended reflow temperature profile, as well as the latest information on reliability testing results, refer to the Application Note 1891: Wafer-Level Packaging (WLP) and its Applications on Maxim's web site at www.maxim-ic.com/wlp. _______________________________________________________________________________________ 9 MAX4747-MAX4750 Applications Information MAX4747-MAX4750 50, Low-Voltage, Quad SPST/Dual SPDT Analog Switches in WLP Test Circuits/Timing Diagrams (continued) MAX4747- MAX4750 V+ V+ COM_ NO_ OR NC_ VN_ LOGIC INPUT 50% VIL VOUT CL 35pF RL 300 tOFF IN_ VOUT SWITCH OUTPUT GND LOGIC INPUT tr < 5ns tf < 5ns VIH 0.9 x VOUT 0.9 x VOUT 0 tON CL INCLUDES FIXTURE AND STRAY CAPACITANCE. RL VOUT = VN_ ( RL + RON ) LOGIC INPUT WAVEFORMS INVERTED FOR SWITCHES THAT HAVE THE OPPOSITE LOGIC SENSE. Figure 2. Switching Time V+ MAX4749 V+ NO_ VN_ VOUT1 COM_ VOUT2 COM_ NC_ RL2 300 IN_ IN_ LOGIC INPUT LOGIC INPUT RL1 300 tr < 5ns tf < 5ns VIH 50% VIL CL1 35pF SWITCH OUTPUT 1 (VOUT1) CL2 35pF 0.9 x V0UT1 0 SWITCH OUTPUT 2 (VOUT2) GND 0.9 x VOUT2 0 tBBM tBBM CL INCLUDES FIXTURE AND STRAY CAPACITANCE. Figure 3. Break-Before-Make Interval V+ MAX4747- MAX4750 VOUT V+ RGEN V GEN NC_ OR NO_ GND VOUT COM CL 1nF VOUT IN OFF ON OFF IN_ VILTO VIH IN OFF ON OFF Q = (V OUT )(C L ) IN DEPENDS ON SWITCH CONFIGURATION; INPUT POLARITY DETERMINED BY SENSE OF SWITCH. Figure 4. Charge Injection 10 ______________________________________________________________________________________ 50, Low-Voltage, Quad SPST/Dual SPDT Analog Switches in WLP 10nF SIGNAL GENERATOR 0dBm 10nF V+ MAX4747- MAX4750 V+ COM_ IN_ VIL OR VIH NC_ OR NO_ ANALYZER SIGNAL GENERATOR 0dBm 0 OR 2.4V V+ V+ COM_ NO_/NC_ IN_ IN_ COM_ NO_/NC_ ANALYZER GND RL MAX4747- MAX4750 50 0 OR 2.4V N.C. GND RL 10nF VDUAL SUPPLIES USED TO ACCOMMODATE GROUND-REFERENCED INSTRUMENTS. Figure 5. Off-Isolation/On-Channel Bandwidth 10nF VDUAL SUPPLIES USED TO ACCOMMODATE GROUND-REFERENCED INSTRUMENTS. Figure 6. Crosstalk Ordering Information (continued) 10nF PART V+ MAX4747- MAX4750 V+ COM_ CAPACITANCE METER f = 1MHz IN_ NC_ OR NO_ GND Figure 7. Channel Off-/On-Capacitance VIL OR VIH TEMP RANGE PIN-/BUMPPACKAGE MAX4748EUD+ -40C to +85C 14 TSSOP MAX4748ETE+ -40C to +85C 16 Thin QFN-EP* MAX4748EWE+T -40C to +85C 16 WLP MAX4749EUD+ -40C to +85C 14 TSSOP MAX4749ETE+ -40C to +85C 16 Thin QFN-EP* MAX4749EWE+T** -40C to +85C 16 WLP MAX4750EUD+ -40C to +85C 14 TSSOP MAX4750ETE+ -40C to +85C 16 Thin QFN-EP* MAX4750EWE+T** -40C to +85C 16 WLP *EP = Exposed pad. +Denotes a lead(Pb)-free/RoHS-compliant package. **Future products. Contact factory for availability. T = Tape and reel. ______________________________________________________________________________________ 11 MAX4747-MAX4750 Test Circuits/Timing Diagrams (continued) 50, Low-Voltage, Quad SPST/Dual SPDT Analog Switches in WLP MAX4747-MAX4750 Pin/Bump Configurations/Truth Tables (continued) V+ N.C. IN1 + TOP VIEW (BUMPS SIDE DOWN) NC1 TOP VIEW 16 15 14 13 MAX4748 + COM1 1 12 IN4 NC2 2 11 NO4 4 10 5 6 7 8 NC3 N.C. *EP GND IN2 MAX4748ETE 3 IN3 COM2 9 COM4 COM3 NC1 1 14 V+ COM1 2 13 IN1 NC2 3 12 IN4 COM2 4 10 COM4 IN3 6 9 COM3 8 NC3 GND 7 INPUT SWITCH STATE LOW HIGH ON OFF *CONNECT EP TO V+ NO1 V+ N.C. IN1 TOP VIEW 16 15 14 13 12 IN4 NC2 2 11 NC4 4 10 5 6 7 8 GND NO3 N.C. *EP IN3 IN2 9 COM4 COM3 14 V+ COM1 2 13 IN1 NC2 3 12 IN4 COM2 4 NO1 V+ N.C. IN1 16 15 14 13 12 N.C. N.C. 2 11 NC2 *EP 10 COM4 IN3 6 9 COM3 8 NO3 INPUT NO1, NO3 NC2, NC4 LOW HIGH OFF ON ON OFF 6 7 8 10 N.C. 9 COM2 14 V+ COM1 2 13 IN1 N.C. 3 12 N.C. NC1 4 11 NC2 N.C. 5 10 N.C. IN4 12 IN2 GND NO2 N.C. NC4 COM4 COM3 MAX4749 1 2 3 4 COM1 NC2 COM2 IN2 NO1 V+ A IN3 B IN1 GND NO3 COM4 COM3 C IN4 NC4 D WLP 8 NO2 MAX4750 1 2 3 4 COM1 N.C. NC1 N.C. NO1 V+ A IN2 B IN1 GND NO2 N.C. COM2 C 9 COM2 GND 7 N.C. NC2 D TSSOP WLP TQFN *CONNECT EP TO V+ NC3 MAX4748 NO1 1 IN2 6 5 GND D MAX4750 1 MAX4750ETE IN3 IN1 TOP VIEW (BUMPS SIDE DOWN) COM1 4 V+ C + N.C. NC1 11 NC4 IN2 5 TOP VIEW 3 IN2 TSSOP *CONNECT EP TO V+ NC1 COM2 WLP NO1 1 GND 7 TQFN + NC2 B MAX4749 1 MAX4749ETE COM1 TOP VIEW (BUMPS SIDE DOWN) COM1 3 4 A + COM2 3 TSSOP TQFN + 2 11 NC4 IN2 5 MAX4748 1 INPUT NO1, NO2 NC1, NC2 LOW HIGH OFF ON ON OFF ______________________________________________________________________________________ 50, Low-Voltage, Quad SPST/Dual SPDT Analog Switches in WLP PROCESS: CMOS For the latest package outline information and land patterns (footprints), go to www.maxim-ic.com/packages. Note that a "+", "#", or "-" in the package code indicates RoHS status only. Package drawings may show a different suffix character, but the drawing pertains to the package regardless of RoHS status. PACKAGE TYPE PACKAGE CODE OUTLINE NO. LAND PATTERN NO. 14 TSSOP U14+1 21-0066 90-0113 16 TQFN T1644+4 21-0139 90-0070 16 WLP W162D2+1 21-0200 Refer to Application Note 1891 ______________________________________________________________________________________ 13 MAX4747-MAX4750 Package Information Chip Information MAX4747-MAX4750 50, Low-Voltage, Quad SPST/Dual SPDT Analog Switches in WLP Revision History REVISION NUMBER REVISION DATE 2 12/06 Various changes 3 1/12 Updated UCSP to WLP packaging, corrected pin configuration, added lead-free packaging DESCRIPTION PAGES CHANGED 1-15 1-9, 11-13 Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied. Maxim reserves the right to change the circuitry and specifications without notice at any time. The parametric values (min and max limits) shown in the Electrical Characteristics table are guaranteed. Other parametric values quoted in this data sheet are provided for guidance. 14 ____________________Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600 (c) 2012 Maxim Integrated Products Maxim is a registered trademark of Maxim Integrated Products, Inc.