LR 5480, LS 5480, LY 5480, LG 5480
5 mm (T1 ¾) LED, Diffused
Wide-Angle LED
2002-04-03 1
Besondere Merkmale
•Gehäusetyp: eingefärbtes, diffuses 5 mm
(T1 3/4) Gehäuse
•Besonderheit des Bauteils: Lötspieße ohne
Aufsetzebene
•Wellenlänge: 645 nm (rot ),
628 nm (super-rot), 587 nm (gelb),
570 nm (grün)
•Abstrahlwinkel: 80°
•Technologie: GaAlP
•optischer Wirkungsgrad: 0,4 lm/W (rot),
1,5 lm/W (super-rot, gelb), 2,5 lm/W (grün)
•Gruppierungsparameter: Lichtstärke
•Lötmethode: Wellenlöten (TTW)
•Verpackung: Schüttgut, gegurtet lieferbar
Anwendungen
•optischer Indikator
•Hinterleuchtung (LCD, Handy, Schalter,
Tasten, Displays, Werbebeleuchtung,
Allgemeinbeleuchtung)
•Innenbeleuchtung im Automobilbereich (z.B.
Instrumentenbeleuchtung, u.ä.)
•Markierungsbeleuchtung (z.B. Stufen,
Fluchtwege, u.ä.)
Features
•package: colored, diffused 5 mm (T1 3/4)
package
•feature of the device: solder leads without
stand-off
•wavelength: 645 nm (red),
628 nm (super-red), 587 nm (yellow),
570 nm (green)
•viewing angle: 80°
•technology: GaAlP
•optical efficiency: 0.4 lm/W (red),
1.5 lm/W (super-red, yellow), 2.5 lm/W (green)
•grouping parameter: luminous intensity
•soldering methods: TTW soldering
•packing: bulk, available taped on reel
Applications
•optical indicators
•backlighting (LCD, cellular phones, switches,
keys, displays, illuminated advertising, general
lighting)
•interior automotive lighting (e.g. dashboard
backlighting, etc.)
•marker lights (e.g. steps, exit ways, etc.)
2002-04-03 2
LR 5480, LS 5480, LY 5480, LG 5480
Helligkeitswerte werden mit einer Str om einprägedauer von 25 ms und einer Genauigkeit von ±11 % ermittelt.
Luminous intensity is tested at a current pulse duration of 25 ms and a tolerance of ±11 %.
Anm.: Die Standardlieferform von Serientypen beinhaltet eine untere bzw. eine obere Familiengruppe oder
mindes t ens z we i Einz elgruppen .
In einer Ve rpac k ungseinheit / Gurt ist immer nur eine Hellig ke itsgruppe enthalten.
Die technologiebedingte Helligkeits-Streuung der heutigen LED-Herstellprozesse über einen längeren
Fertigungszeitraum (Halbleitermaterial - Chipherstellung - Montageprozess) erlaubt keine Zusage einer
einzeln en Helligkeitsg ruppe. Daher müss en mindestens zwei Helligk eitsgruppen vorgesehe n w erden!
Note: The stan dard shippin g format for se rial types incl udes a lower or upper fami ly group or at leas t two individua l
groups.
No packin g unit / tape ever contain s m ore than one luminous intensit y group.
Luminosity variations caused by the technology used in current LED manufacturing processes over a
protracted manufacturing period (semiconductor material - chip fabrication - assembly process) mean that it is
not possible to assign LEDs to a single luminous intensity group. For this reason at least two luminous intensity
groups m us t be provided!
Typ
Type
Emissions-
farbe
Color of
Emission
Gehäuse-
farbe
Color of
Package
Lichtstärke
Luminous
Intensity
IF = 10 mA
IV (mcd)
Lichtstrom
Luminous
Flux
IF = 10 mA
ΦV (mlm)
Bestellnummer
Ordering Code
■LR 5480-CF
■LR 5480-E
■LR 5480-F
■LR 5480-DG
red red diffused 0.28 ... 1.80
0.71 ... 1.12
1.12 ... 1.80
0.45 ... 2.80
4 (typ.)
3 (typ.)
5 (typ.)
6 (typ.)
Q62703-Q1986
Q62703-Q1734
Q62703-Q1987
Q62703-Q1408
LS 5480-GL
LS 5480-J
LS 5480-K
LS 5480-L
LS 5480-JM
super-red red diffused 1.80 ... 18.00
4.50 ... 7.10
7.10 ... 11.20
11.20 ... 18.00
4.50 ... 28.00
35 (typ.)
20 (typ.)
30 (typ.)
50 (typ.)
60 (typ.)
Q62703-Q1989
Q62703-Q1414
Q62703-Q1990
Q62703-Q1991
Q62703-Q1992
LY 5480-HL
LY 5480-K
LY 5480-L
LY 5480-JM
yellow yellow diffused 2.80 ... 18.00
7.10 ... 11.20
11.20 ... 18.00
4.50 ... 28.00
35 (typ.)
30 (typ.)
50 (typ.)
60 (typ.)
Q62703-Q1416
Q62703-Q1418
Q62703-Q2402
Q62703-Q1419
LG 5480-GK
LG 5480-H
LG 5480-J
LG 5480-K
LG 5480-HL
green green diffused 1.80 ... 11.20
2.80 ... 4.50
4.50 ... 7.10
7.10 ... 11.20
2.80 ... 18.00
20 (typ.)
12 (typ.)
20 (typ.)
30 (typ.)
50 (typ.)
Q62703-Q1423
Q62703-Q1422
Q62703-Q1869
Q62703-Q2018
Q62703-Q3191
■Nicht für Neuentwicklungen/Not for new designs
LR 5480, LS 5480, LY 5480, LG 5480
2002-04-03 3
Grenzwerte
Maximum Ratings
Bezeichnung
Parameter Symbol
Symbol Wert
Value Einheit
Unit
LR LS, LY, LG
Betriebstemperatur
Operating temperature range Top – 55 … + 100 °C
Lagertemperatur
Storage temperature range Tstg – 55 … + 100 °C
Sperrschichttemperatur
Junction temperature Tj+ 100 °C
Durchlassstrom
Forward current IF45 40 mA
Stoßstrom
Surge current
t ≤ 10 µs, D = 0.005
IFM 0.5 A
Sperrspannung
Reverse voltage VR5V
Leistungsaufnahme
Power consumption
TA ≤ 25 °C
Ptot 95 130 mW
Wärmewiderstand 1)
Thermal resistance
Sperrschicht/Umgebung
Junction/ambient
Sperrschicht/Lötpad
Junction/solder point
Montage auf PC-Board FR 4 (Padgröße ≥ 16 mm 2)
mounted on PC board FR 4 (pad size ≥ 16 mm 2)
Minimale Beinchenlänge
Minimum lead length
Rth JA
Rth JS
400
180
K/W
K/W
1) Rth erhöht sich um 13 K/W pro mm Beinchenlänge.
Each additional 1 mm of lead length increases Rth by 13 K/W.
2002-04-03 4
LR 5480, LS 5480, LY 5480, LG 5480
Kennwerte (TA = 25 °C)
Characteristics
Bezeichnung
Parameter Symbol
Symbol Wert
Value Einheit
Unit
LR LS LY LG
Wellenlänge des emittierten Lichtes (typ.)
Wavelength at peak emission
IF = 10 mA
λpeak 660 635 586 572 nm
Dominantwellenlänge 1) (typ.)
Dominant wavelength
IF = 10 mA
λdom 645 628 587 570 nm
Spektrale Bandbreite bei 50 % Irel max (typ.)
Spectral bandwidth at 50 % Irel max
IF = 10 mA
∆λ 35 45 45 25 nm
Abstrahlwinkel bei 50 % IV (Vollwinkel) (typ.)
Viewing angle at 50 % IV
2ϕ80 80 80 80 Grad
deg.
Durchlassspannung 2) (typ.)
Forward voltage (max.)
IF = 10 mA
VF
VF
1.6
1.9 2.0
2.5 2.0
2.5 2.0
2.5 V
V
Sperrstrom (typ . )
Reverse current (max.)
VR = 5 V
IR
IR
0.01
10 0.01
10 0.01
10 0.01
10 µA
µA
Temperaturkoeffizient von λpeak (typ.)
Temperature coefficient of λpeak
IF = 10 mA; –10°C ≤ T ≤ 100°C
TCλpeak 0.03 0.11 0.10 0.11 nm/K
Temperaturkoeffizient von λdom (typ.)
Temperature coefficient of λdom
IF = 10 mA; –10°C ≤ T ≤ 100°C
TCλdom 0.06 0.07 0.07 0.07 nm/K
Temperaturkoeffizient von VF(typ.)
Temperature coefficient of VF
IF = 10 mA; –10°C ≤ T ≤ 100°C
TCV– 1.4 – 1.9 – 1.9 – 1.4 mV/K
Optischer Wirkungsgrad (typ.)
Optical efficiency
IF = 10 mA
ηopt 0.4 1.5 1.5 2.5 lm/W
1) Wellenlängen werden m it einer St romeinprägedauer von 25 ms und einer Genauigkeit von ±1 nm ermittelt.
Wavelengths are tested at a current puls e duration of 25 ms and a tolerance of ±1 nm.
2) Spannungswerte w erden mit einer Stromeinprägedauer von 1 ms und einer Genau igkeit von ±0 ,1 V erm it te lt.
Voltage s are tested at a current pulse du rat ion of 1 ms and a tolerance of ±0.1 V .
LR 5480, LS 5480, LY 5480, LG 5480
2002-04-03 5
Relative spektrale Emission Irel = f (λ), TA = 25 °C, IF = 10 mA
Relative Spectral Emission
V(λ) = spektrale Augenempfindlichkeit
Standard eye response curve
Abstrahlcharakteristik Irel = f (ϕ)
Radiation Characteristic
%
rel
λ
OHL01164
V
λ
100
80
60
40
20
0400 450 500 550 600 650 700
nm
I
green
yellow
super-red
red
0
0.2
0.4
1.0
0.8
0.6
φ
1.0 0.8 0.6 0.4
0˚10˚20˚40˚ 30˚ OHL01643
50˚
60˚
70˚
80˚
90˚
100˚ 0˚ 20˚ 40˚ 60˚ 80˚ 100˚ 120˚
LR 5480, LS 5480, LY 5480, LG 5480
2002-04-03 6
Durchlassstrom IF = f (VF)
Forward Current
TA = 25 °C
Maximal zulässiger Durchlassstrom IF = f (T)
Max. Permissible Forward Current
LS, LY, LG
Relative Lichtstärke IV/IV(10 mA) = f (IF)
Relative Luminous Intensity
TA = 25 °C
Maximal zulässiger Durchlassstrom IF = f (T)
Max. Permissible Forward Current
LR
10
-1
V
5
OHL01676
I
F
F
V
0
10
1
10
2
10
5
mA
1.0 1.4 1.8 2.2 2.6 3.0 3.4
red super-red
yellow
green
0
OHL02143
I
F
˚C
T
0
20 40 60 80 100
10
20
30
40
50
mA
temp. solder point
temp. ambient
T
A
T
S
S
T
A
T
V
V
(10mA)
10
-1 0
10 10
12
10
mA
10
-3
5
OHL01011
F
I
5
-2
10
5
-1
10
0
10
1
10
II
55
green
yellow
red
red
super-red
T
OHL00997
0
F
I
020406080 ˚C 100
10
20
30
40
50
mA
temp. solder point
temp. ambient
T
A
T
S
S
T
A
T
LR 5480, LS 5480, LY 5480, LG 5480
2002-04-03 7
Relative Lichtstärke IV/IV(25 °C) = f (TA)
Relative Luminous Intensity
IF = 10 mA
Zulässige Impulsbelastbarkeit IF = f (tp)
Permissible Pulse Handling Capability
Duty cycle D = parameter, TA = 25 °C
yellow
green
super-red
0.0
OHL01680
˚C
A
T
0 20 40 60 80 100
V
V
(25 ˚C)
II
0.4
0.8
1.2
1.6
2.0
red
OHL01162
s10
-5
10
-4
10
-3
10
-2
10
-1
10
0
10
1
t
DI
TT
P
F
t
P
=
D
=0.005
0.01
0.02
0.05
0.1
0.2
0.5
DC
10
1
5
I
F
t
2
10
3
10
4
10
5
mA
p
2002-04-03 8
LR 5480, LS 5480, LY 5480, LG 5480
Maßzeichnung
Package Outlines
Maße werden wi e fo lgt angegeben: m m (inc h) / D im ensions are specified as follow s: m m (inc h).
Kathodenkennung: kürzerer Lötspieß
Cathode mark: short solder lead
Gewicht / Approx. weight: 0.35 g
0.4 (0.016)
0.6 (0.024)
5.5 (0.217)
5.9 (0.232)
Area not flat
8.2 (0.323)
9.0 (0.354)
ø4.8 (0.189)
ø5.1 (0.201)
7.8 (0.307)
7.5 (0.295)
27.0 (1.063)
29.0 (1.142)
spacing
2.54 (0.100)
0.8 (0.031)
0.4 (0.016)
0.4 (0.016)
0.6 (0.024)
1.2 (0.047)
1.8 (0.071)
Cathode
GEXY6713
LR 5480, LS 5480, LY 5480, LG 5480
2002-04-03 9
Lötbedingungen
Soldering Conditions
Wellenlöten (TTW) (nach CECC 00802)
TTW Soldering (acc. to CECC 00802)
Empfohlenes Lötpaddesign Wellenlöten (TTW)
Recommended Solder Pad TTW Soldering
Maße werden wi e fo lgt angegeben: m m (inc h) / D im ensions are specified as follow s: m m (inc h).
OHLY0598
0
050 100 150 200 250
50
100
150
200
250
300
T
t
C
s
235 C
10 s
C... 260
1. Welle
1. wave
2. Welle
2. wave
5 K/s 2 K/s
ca 200 K/s
CC... 130100
2 K/s Zwangskühlung
forced cooling
Normalkurve
standard curve
Grenzkurven
limit curves
4 (0.157)
OHLPY985
4.8 (1.890)
2002-04-03 10
LR 5480, LS 5480, LY 5480, LG 5480
Published by OSRAM Opto Semiconductors GmbH & Co. OHG
Wernerwerkstrasse 2, D-93049 Regensburg
© All Rights Reserved.
Attention please!
The inform at ion describe s t he type of compon ent and shall not be c ons idered as assured charac te ristics.
Terms of delivery and rights to change design reserved. Due to technical requirements components may contain
dangerous substances. For information on the types in question please contact our Sales Organization.
If printed or downloaded, please find the lat es t vers ion in the Internet .
Packing
Please use the recyc ling operat ors known t o you. We can also help y ou – get in touch wit h your near est sales offic e.
By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing
material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs
incurred.
Components used in life-support devices or systems must be expressly authorized for such purpose! Critical
components 1 may only be us ed in life-supp ort dev ic es or sys t em s 2 with the express written approval of OSRAM OS.
1 A critical c omponent is a compone nt used in a life-support device or system whose failure can reaso nably be expected
to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or
system.
2 Life sup port device s or syst ems ar e int ended (a ) to b e imp lanted in t he hu man body , or ( b) to supp ort a nd/or main tain
and sust ain human life. If th ey fail, it is reasonable to assum e th at the health of the user may be endange red.
Revision History: 2002-04-03
Previous Version: 2001-03-12
Page Subjects (major changes since last revision)
3 thermal resistance (footnote)
