Low Profile SMD Fast Recovery Rectifiers CFRMT104-HF Thru. CFRMT107-HF Reverse Voltage: 400 to 1000 Volts Forward Current: 1.0 Amp RoHS Device Halogen Free SOD-123H Features -Excellent power dissipation offers better reverse leakage current and thermal resistance. -Low profile surface mounted application in order to optimize board space. -Tiny plastic SMD package. -High current capability. -Fast switching for high efficiency. -High surge current capability. -Glass passivated chip junction. -Lead-free parts meet RoHS requirments. 0.146(3.7) 0.130(3.3) 0.018(0.45) 0.006(0.15) 0.071(1.8) 0.055(1.4) 0.006(0.15) 0.002(0.05) 0.040(1.0) 0.024(0.6) Mechanical data -Epoxy: UL94V-0 rated flame retardant. -Case: Molded plastic, SOD-123H/MINI SMA -Terminals: Solderable per MIL-STD-750, Method 2026. -Polarity: Indicated by cathode band. -Mounting Position: any -Weight: 0.011 grams approx. 0.035(0.9) 0.028(0.7) 0.035(0.9) 0.028(0.7) Dimensions in inches and (millimeter) Maximum Ratings and Electrical Characteristics (at T =25C unless otherwise noted) A Symbol CFRMT 104-HF CFRMT 105-HF CFRMT 107-HF Unit Max. Repetitive peak reverse voltage VRRM 400 600 1000 V Max. Continuous reverse voltage VR 400 600 1000 V Max. RMS voltage VRMS 280 420 700 V Parameter Max. Forward rectified current IO 1.0 A Max. Forward voltage @ IF=1.0A VF 1.3 V Max. Reverse recovery time (note 1) Trr (See Fig.1) 150 250 500 ns Max. Forward surge current 8.3ms singe half sine-wave superimposed on rated load (JEDEC method) IFSM 5.0 VR=VRRM TJ=25C Max. Reverse current 25 IR Typ. Diode Junction capacitance f=1MHz and applied 4V DC reverse voltage Operating junction temperature Storage temperature range A 100 VR=VRRM TJ=125C Typ. Thermal resistance Junction to ambient air A RJA 42 C/W CJ 15 pF TJ -55 to +150 C TSTG -65 to +175 C Note 1. Reverse recovery time test condition, IF=0.5A, IR=1.0A, IRR=0.25A Company reserves the right to improve product design , functions and reliability without notice. REV: C QW-JF002 Page 1 Comchip Technology CO., LTD. Low Profile SMD Fast Recovery Rectifiers Rating and Characteristic Curves (CFRMT104-HF Thru. CFRMT107-HF) Fig.2 - Typical forward characteristics Fig.1 - Typical forward current derating curve 100 P.C.B. Mounted on 0.2" * 0.2"(5mm*5mm) Copper Pad Areas 1.2 Instantaneous forward current, (A) Average forward current, (A) 1.4 1.0 0.8 0.6 0.4 0.2 0 0 25 75 50 100 125 150 10 1.0 0.01 0.6 175 TJ=25C Pulse width=300s 1% duty cycle 0.1 0.8 1.0 1.2 1.4 1.6 1.8 2.0 Forward voltage (V) Lead temperature, (C) Fig.3 - Test Circuit Diagram and Reverse Recovery Time Characteristics Fig.4 - Maximum Non-repetitive forward surge current 10W NONINDUCTIVE ( ) (+) 25Vdc (approx.) D.U.T. PULSE GENERATOR (NOTE 2) ( ) 1W NONINDUCTIVE (+) OSCILLISCOPE (NOTE 1) NOTES: 1. Rise Time= 7ns max., Input Impedance= 1 megohm.22pF. 2. Rise Time= 10ns max., Source Impedance= 50 ohms. Peak forward surge current, (A) 50 50W NONINDUCTIVE TJ=25C 8.3ms single half sine wave, JEDEC method 40 30 20 10 0 trr 1 | | | | | | | | +0.5A 0 10 100 Number of Cycles at 60Hz Fig.5 - Typical junction capacitance -0.25A 35 1cm SET TIME BASE FOR 50 / 10ns / cm Junction capacitance, (pF) 30 -1.0A 25 20 15 10 5 0 0.01 0.1 1 10 100 Reverse voltage, (V) Company reserves the right to improve product design , functions and reliability without notice. REV: C QW-JF002 Page 2 Comchip Technology CO., LTD. Low Profile SMD Fast Recovery Rectifiers Reel Taping Specification d P0 P1 T E Index hole F W B C P A 12 o 0 D2 D1 D W1 Trailer Device ....... ....... End ....... ....... Leader ....... ....... ....... ....... 10 pitches (min) Start 10 pitches (min) Direction of Feed SOD-123H SOD-123H SYMBOL A B C d D D1 D2 (mm) 2.00 0.10 3.85 0.10 1.10 0.10 1.50 0.10 178.00 2.00 62.00 (min) 13.00 0.50 (inch) 0.079 0.004 0.152 0.004 0.043 0.004 0.059 0.004 7.007 0.079 2.441 (min) 0.512 0.020 SYMBOL E F P P0 P1 T W W1 (mm) 1.75 0.10 3.50 0.10 4.00 0.10 4.00 0.10 2.00 0.10 0.23 0.10 8.00 0.30 11.40 1.00 (inch) 0.069 0.004 0.138 0.004 0.157 0.004 0.157 0.004 0.079 0.004 0.009 0.04 0.315 0.012 0.449 0.039 Company reserves the right to improve product design , functions and reliability without notice. REV: C QW-JF002 Page 3 Comchip Technology CO., LTD. Low Profile SMD Fast Recovery Rectifiers Pinning information Simplified outline Pin PIN 1 Cathode PIN 2 Anode 1 Symbol 1 2 2 Marking Code Part Number Marking Code CFRMT104-HF CFRMT105-HF CFRMT107-HF F4 F5 F7 XX xx = Product type marking code Suggested PAD Layout SOD-123H SIZE (mm) (inch) A 3.00 0.118 B 1.30 0.051 C 1.80 0.071 D 4.30 0.169 1.70 0.067 D A E E C B Standard Packaging REEL PACK Case Type SOD-123H REEL Reel Size ( pcs ) (inch) 3,000 7 Company reserves the right to improve product design , functions and reliability without notice. REV: C QW-JF002 Page 4 Comchip Technology CO., LTD. Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Comchip Technology: CFRMT107-HF CFRMT105-HF