Tyco Electronics Corporation
Harrisburg, PA
tycoelectronics.com
3-1773445-8–2.5M–LUG–FP–6-07
RoHS
Ready
Solutions for AdvancedTCA,
AdvancedTCA 300, MicroTCA,
and AdvancedMC Standards
2
Catalog 3-1773445-8 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are U.S. equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Introduction
Solutions for AdvancedTCA, AdvancedTCA 300,
MicroTCA, and AdvancedMC Standards
AdvancedMC, AdvancedTCA,
AdvancedTCA 300, MicroTCA and
PICMG are trademarks of PICMG-PCI
Industrial Computer Manufacturers
Group Incorporated.
Solutions For
AdvancedTCA
Hardware designers,
particularly those working
on blades or chassis, are
currently faced with huge
challenges. The needs of
the communications net-
work infrastructure and next
generation communication
applications are rapidly
changing, and cannot be
served by existing propri-
etary solutions.
Therefore AdvancedTCA
(Advanced Telecommuni-
cations Computing
Architecture), MicroTCA
(Micro Telecommunications
Computing Architecture) and
AdvancedMC (Advanced
Mezzanine Card) open
industry standards have
been developed by PICMG
to place a high priority on
cost effectiveness while
attempting to support a
variety of potential future
technologies.
This new standard is
also supported by
Tyco Electronics, which
shows the full range of
AdvancedTCA, MicroTCA
and AdvancedMC compliant
components that can be
offered for the wide area of
applications within telecom-
munication as well as data
communication.
Why are AdvancedTCA
and MicroTCA Standards
Important?
AdvancedTCA and
MicroTCA provide a means
for the telecommunications
equipment market to take
advantage of standardized,
off-the-shelf hardware
(enabling differentiation
through application-layer
and system-level software
rather than hardware).
•Shorter time to market
•Increased vendor choice
•Increased flexibility
•Multiple switch fabrics
supported
•User defined I/O
•Lower cost
(Acquisition CapEx/OpEx)
Examples of Telecom
& Network Equipment
Manufacturers’ Related
AdvancedTCA and
MicroTCA Applications &
Systems
Wireless Infrastructure
Equipment
•Base Stations
3G (IMT-2000)
WCDMA
CDMA2000
TD-SCDMA
•Radio Network Controllers
(RNC)
•Serving Gateway Support
Node (SGSN)
•Gateway GPRS Support
Node (GGSN)
•Home Location Register
(HLR)
•IP Multimedia Subsystem
(IMS) Servers
•Media and Application
Servers
•Media Gateways and Soft
Switches
Wireline Networking
Equipment
•DSLAMs
•Multi-service switches
•Media servers
•Blade servers
•VOIP Session Controllers
Fiber Optic Networking
Equipment
Need more information?
Call Technical Support at the
numbers listed below.
Technical Support is staffed
with specialists well versed in
all Tyco Electronics products.
They can provide you with:
■Technical Support
■Catalogs
■Technical Documents
■Product Samples
■Tyco Electronics
Authorized Distributor
Locations
3
Catalog 3-1773445-8 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are U.S. equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Introduction (Continued)
Solutions for AdvancedTCA, AdvancedTCA 300,
MicroTCA, and AdvancedMC Standards
AdvancedMC, AdvancedTCA,
AdvancedTCA 300, MicroTCA and
PICMG are trademarks of PICMG-PCI
Industrial Computer Manufacturers
Group Incorporated.
What Is AdvancedTCA?
AdvancedTCA is an open
industry standard, devel-
oped by PICMG 3.0, to cre-
ate a new blade (board)
and chassis (shelf) form
factor, tailored to meet the
needs of the rapidly chang-
ing communications net-
work infrastructure, and
next generation communi-
cation applications, which
cannot be served by exist-
ing proprietary solutions.
This architecture places
high priority on cost effec-
tiveness versus attempting
to support a variety of
potential future technologies.
While the specification is
founded on the require-
ments of the communica-
tions infrastructure, it is
extensible to a variety of
applications and environ-
ments where highly avail-
able, highly scalable, cost
effective and open architec-
ture modular solutions are
required.
What Is
AdvancedTCA300?
AdvancedTCA300 is an
AdvancedTCA based
equipment platform, but
compliant with the ANSI and
ETSI equipment practices
requiring 300 mm total depth,
front access included.
What Is AdvancedMC?
The AdvancedMC standard,
also developed by PICMG,
defines the base-level
requirements for a wide-
range of high-speed mezza-
nine cards, optimized for, but
not limited to, AdvancedTCA
and MicroTCA carrier
blades. AdvancedMC
defines a modular add-on
or “child” card that extends
the functionality of an
AdvancedTCA carrier
board. In an AdvancedTCA
equipment practice, the
AdvancedMC modules lie
parallel to and are integrated
onto the AdvancedTCA
carrier board. The
AdvancedMC cards can
also be equipped in
MicroTCA shelves.
What Is MicroTCA?
MicroTCA is complementary
to AdvancedTCA, but is
optimized for smaller scale
and more price
sensitive applications. The
basic premise of MicroTCA
is to support mezzanine
boards, conform to the
AdvancedMC standard,
and connect to the back-
plane, eliminating the need
to use an additional carrier
board. Like AdvancedTCA,
the MicroTCA equipment
practice is a modular, open
standards based shelf level
platform. The MicroTCA
standard has not finished
completion yet.
The architecture is opti-
mized around connectivity
requirements of signaling
and media gateways, while
also providing headroom for
higher performance com-
puting elements @ a
99.999% availability rate.
AdvancedTCA offers
a scalable backplane
environment that supports:
•A variety of standard
and proprietary fabric
interfaces
•Robust system
management
•Superior power and
cooling capabilities.
Each board in AdvancedTCA
(up to 16 boards a shelf and
3 shelves a rack) may sup-
port up to 200 W in a single
slot. The power is supplied
to each board via redun-
dant -48 VDC feeds. Front
and rear cabling practice is
supported for standard 600
mm total depth cabinet
practice, prevalent in
Central Office facilities.
www.tycoelectronics.com/products/atca
4
Catalog 3-1773445-8 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are U.S. equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Table of Contents
Solutions for AdvancedTCA, AdvancedTCA 300,
MicroTCA, and AdvancedMC Standards
Introduction to AdvancedTCA, MicroTCA, and AdvancedMC Standards . . . . . . . . . 2, 3
Product Defined in AdvancedTCA/AdvancedTCA 300 Specifications
AdvancedTCA — Zone 1 Power Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5, 6
AdvancedTCA — Zone 2 Z-PACK HM-Zd High Speed Signal Connectors . . . . . . . . . . 7-9
AdvancedTCA — Zone 3 RTM Board Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Co-Planar UPM for AdvancedTCA Zone 3 Power Applications . . . . . . . . . . . . . . . . . . . 11
Z-PACK TinMan Connectors for AdvancedTCA Standards — Zone 3 . . . . . . . . . . . . . . 12
AdvancedTCA — Advanced Mezzanine Card (AdvancedMC) Connectors . . . . . . . . . . 13
MULTI-BEAM XL Connectors for AdvancedTCA 300 Standard . . . . . . . . . . . . . . . . . . . 14
AdvancedTCA—GuideModules ..........................................15
Product Defined in MicroTCA Specification
Vertical AdvancedMC Connector for MicroTCA Applications . . . . . . . . . . . . . . . . . . . . . 16
MINIPAKHDPowerConnectors ........................................17-19
Product Compliant to xTCA or AdvancedMC Specifications
Stacked RJ45 Modular Jacks for AdvancedTCA, AdvancedMC Standards . . . . . . . . . . 20
LowProfileRJ45ModularJacks ...........................................21
AdvancedTCA — Front & Rear I/O Connectors – SFP Modules . . . . . . . . . . . . . . . . . . 22
AdvancedTCA — Front & Rear I/O Connectors — MRJ21 Receptacles . . . . . . . . . . . . 23
AdvancedTCA — Thermal Products & Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Low Profile DDR2 Connector for AdvancedTCA Standards . . . . . . . . . . . . . . . . . . . . . . 24
SO DIMM Connectors for AdvancedMC Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
1.0 mm Free Height (FH) (IEEE 1386) Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
AdvancedTCA — Power Distribution & Management Modules . . . . . . . . . . . . . . . . 27, 28
Part Number Index ......................................................29
Web Site Information ....................................................30
Global Contacts .........................................................31
Restriction on the use of Hazardous Substances
(RoHS)
At Tyco Electronics, we’re ready to support your RoHS require-
ments. We’ve assessed more than 1.5 million end items/com-
ponents for RoHS compliance, and issued new part numbers
where any change was required to eliminate the restricted
|materials. Part numbers in this catalog are identified as:
RoHS Compliant — Part numbers in this catalog are RoHS
Compliant, unless marked otherwise. These products comply
with European Union Directive 2002/95/EC as amended 1
January 2006 that restricts the use of lead, mercury, cadmium,
hexavalent chromium, PBB, and PBDE in certain electrical and
electronic products sold into the EU as of 1 July 2006.
NOTE: For purposes of this Catalog, included within the defini-
tion of RoHS Compliant are products that are clearly “Out of
Scope” of the RoHS Directive such as hand tools and other
non-electrical accessories.
5 of 6 Compliant —A“䢇” symbol identifies these part
numbers. These products do not fully comply with the
European Union Directive 2002/95/EC because they contain
lead in solderable interfaces (they do not contain any of the
other five restricted substances above allowable limits).
However, these products may be suitable for use in RoHS
applications where there is an application-based exception for
lead in solders, such as the server, storage, or networking
infrastructure exemption.
NOTE: Information regarding RoHS compliance is provided
based on reasonable inquiry of our suppliers and represents our
current actual knowledge based on the information provided by
our suppliers. This information is subject to change. For latest
compliance status, refer to our website referenced at right.
Getting the Information You Need
Our comprehensive on-line RoHS Customer Support Center
provides a forum to answer your questions and support your
RoHS needs. A RoHS FAQ (Frequently Asked Questions) is
available with links to more detailed information. You can also
submit RoHS questions and receive a response within 24 hours
during a normal work week. The Support Center also provides:
■Cross-Reference from
Non-compliant to Compliant
Products
■Ability to browse RoHS
Compliant Products in our
on-line catalog
■Downloadable Technical Data
Customer Information
Presentation
■More detailed information
regarding the definitions used above
■So whatever your questions when it comes to RoHS, we’ve
got the answers at www.tycoelectronics.com/leadfree
RoHS
Customer
Support
Center
© Copyright 2007, 2006 and 2005 by
Tyco Electronics Corporation.
All International Rights Reserved.
AMP, Austin Lynx, CHIP COOLER,
ELCON, FUTUREBUS+, MINIPAK,
MRJ21, MULTI-BEAM XL, TE Logo,
Tyco Electronics, Z-PACK and
Z-PACK TinMan are trademarks.
AdvancedMC, AdvancedTCA,
AdvancedTCA 300, MicroTCA and
PICMG are trademarks of PICMG-PCI
Industrial Computer Manufacturers
Group Incorporated.
Infiniband is a trademark of Infiniband
Trade Association.
Other products, logos, and company
names mentioned herein may be
trademarks of their respective owners.
Disclaimer
While Tyco Electronics Corporation
and its affiliates referenced herein
(“Tyco Electronics”) have made every
reasonable effort to ensure the accuracy
of the information in this catalog,
Tyco Electronics does not guarantee that
it is error-free, nor does Tyco Electronics
make any other representation, warranty
or guarantee that the information is
accurate, correct, reliable or current.
Tyco Electronics reserves the right to
make any adjustments to the information
contained herein at any time without
notice. Tyco Electronics expressly dis-
claims all implied warranties regarding
the information contained herein, includ-
ing, but not limited to, any implied war-
ranties of merchantability or fitness for
a particular purpose. Tyco Electronics’
only obligations are those in the
Tyco Electronics Standard Terms and
Conditions of Sale, and in no case will
Tyco Electronics be responsible for any
incidental, indirect, or consequential
damages arising from the sale, resale,
use, or misuse of its products. Users
should independently evaluate the suit-
ability of, and test each product for, their
application.
The dimensions, specifications, designs,
construction, materials and processes in
this catalog are for reference purposes
only and are subject to change without
notice. Please consult Tyco Electronics
for the most current product information.
The export of certain Tyco Electronics
products is restricted by the Arms Export
Control Act (Title 22, U.S.C. Sec 2751, et
seq.) or the Export Administration Act of
1979, as amended (Title 50, U.S.C., App.
2401 et seq.). Orders may be subject to
export approval by the U.S. Government.
Buyer must comply with all applicable
export laws of all applicable jurisdictions.
See inside back cover for Global
Contacts and phone numbers.
5
Catalog 3-1773445-8 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are U.S. equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Product Defined in AdvancedTCA/AdvancedTCA 300 Specifications
Solutions for AdvancedTCA, AdvancedTCA 300,
MicroTCA, and AdvancedMC Standards
AdvancedMC, AdvancedTCA,
AdvancedTCA 300, MicroTCA and
PICMG are trademarks of PICMG-PCI
Industrial Computer Manufacturers
Group Incorporated.
Product Defined in AdvancedTCA/
AdvancedTCA 300 Specifications
Tyco Electronics' AdvancedTCA Power Con-
nector is designed to meet or exceed the
PICMG 3.0, R2.0 (AdvancedTCA) specifica-
tion for Zone 1 connector requirements
including four levels of sequential mating to
provide proper system functionality during
live insertion or extraction of front boards.
Integrated lead-in on the injection molded
housing provides superior blind mate
capability and is fully intermateable with
competing connectors designed to meet the
AdvancedTCA specification for power con-
nectors.
www.tycoelectronics.com/products/atca
www.elconproducts.com
Catalog 1773096 / 1773095
Flyer 2-1773441-7
AdvancedTCA — Zone 1 Power Connectors
FEATURES:
• High conductivity, precision
formed contacts
• Selective plating in compliance
with RoHS requirements
• Precision formed compliant
terminations offer excellent reten-
tion to provide a reliable
connection
• Qualified to meet PICMG 3.0, R2.0
specification
AdvancedTCA Zone 1
Connector
Front Board Connector
Right Angle Header
Part Number 1766500-1
Backplane Connector
Vertical Receptacle
Part Number 1766501-1
Backplane Connector Daughtercard Connector
Note: Part Numbers are RoHS compliant.
6
Catalog 3-1773445-8 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are U.S. equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Product Defined in AdvancedTCA/AdvancedTCA 300 Specifications (Continued)
Solutions for AdvancedTCA, AdvancedTCA 300,
MicroTCA, and AdvancedMC Standards
AdvancedMC, AdvancedTCA,
AdvancedTCA 300, MicroTCA and
PICMG are trademarks of PICMG-PCI
Industrial Computer Manufacturers
Group Incorporated.
Product Defined in AdvancedTCA/
AdvancedTCA 300 Specifications
Backplane Connector
Straight, Compliant Press-fit,
Part Number 1766501-1
(tin plated pcb tails)
Part Number 1766501-2䢇
(tin-lead pcb tails)
Straight, 22-Position,
Compliant Press-fit
Part Number 1766503-1
(tin plated pcb tails)
Part Number 1766503-2䢇
(tin-lead pcb tails)
Material and Finish
Insulators — Thermoplastic, glass
reinforced, black, UL94V-0
Signal Pins — Copper alloy
Power Contacts — High conductivity
copper alloy, plated 0.0076 [.000030]
min. gold in mating area
Solder tails — 0.0030 - 0.0043
[.000120 - .000170] tin plated
Notes:
1. Mounting Holes (Ø2.00 [.079] x
5.00 [.197] DP) for use with self
tapping screw (customer supplied).
2. Positions 1–4 not populated and
reserved for future use.
46.10
[1.815] Ref. 22.20
[.874]
5.30
[.207]
33
30
28
25
211713
242016
1
4
34
31
32
27
29
26
See Note 2
See Note 1
20.90
[.823] Max.
4.60
[.180]
Front Board Connector
Right Angle,
Compliant Press-fit
Part Number 1766500-1
(tin plated pcb tails)
Part Number 1766500-2䢇
(tin-lead pcb tails)
Right Angle Plug, 22-Position,
Compliant Press-fit
Part Number 1766502-1
(tin plated pcb tails)
Part Number 1766502-2䢇
(tin-lead pcb tails)
Material and Finish
Insulators — Thermoplastic, glass
reinforced, black, UL94V-0
Signal Pins — Copper alloy
Power Contacts — High conductivity
copper alloy, plated 0.00076 [.000030]
min. gold in mating area
Solder Tails — 0.0030 - 0.0043
[.000120 - .000170] tin plated
Notes:
1. Mounting Holes (Ø 2.00 [.079] x
5.00 [.197] DP) for use with self
tapping screw (customer supplied).
2. Positions 1–4 not populated and
reserved for future use.
46.10
[1.815] Ref. 41.30
[1.626] Max.
18.65
[.734]
33 30 28 25 21 17 13
24 20 16
1
4
34 31
3227
29 26
See Note 1
See Note 2
20.90
[.823] Max. 4.60
[.180]
5.30
[.207]
AdvancedTCA Zone 1
Connector
(Continued)
Note: Part Numbers are RoHS compliant except: 䢇Indicates “5 of 6 compliant” (lead in solderable interface only).
7
Catalog 3-1773445-8 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are U.S. equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Product Defined in AdvancedTCA/AdvancedTCA 300 Specifications (Continued)
Solutions for AdvancedTCA, AdvancedTCA 300,
MicroTCA, and AdvancedMC Standards
AdvancedMC, AdvancedTCA,
AdvancedTCA 300, MicroTCA and
PICMG are trademarks of PICMG-PCI
Industrial Computer Manufacturers
Group Incorporated.
Product Defined in AdvancedTCA/
AdvancedTCA 300 Specifications
Z-PACK HM-Zd product from
Tyco Electronics is the high-speed,
Advanced Differential Fabric Connector
system specified by PICMG for use in
AdvancedTCA Zone 2. The coplanar appli-
cation version using the right angled male
and identical Zone 2 card connector (right
angled female), can be used in Zone 3. In
addition to the four-pair connector modules
specified for use in AdvancedTCA Zone 2,
the product line includes two-pair and three-
pair signal modules, coplanar connectors,
and high-speed cable assemblies for use in
Zone 3. A mezzanine style connector is also
available in a four-pair version.
www.tycoelectronics.com/products/atca
www.hmzd.tycoelectronics.com
Catalog 1773095
Flyer 1308658
AdvancedTCA — Zone 2 Z-PACK HM-Zd High Speed Signal Connectors
FEATURES
• Designed specifically for high-
speed differential applications
(3.125 Gb/s to 10+Gb/s)
• A modular connector system with
a standard module size of 25.00
[.984]
• Z-PACK HM-Zd product is an
extension of the Z-PACK 2 mm HM
product line
• Pin header and receptacle have
the exact same footprint to sim-
plify PC board layout
• Optimized footprint supports quad
routing techniques for improved
electrical performance, ease of
trace routing, and significant PCB
manufacturing cost reductions
• Designed to meet Telcordia
requirements
Front Board Connector Backplane Connector
AdvancedTCA Zone 2
Z-PACK HM-Zd High Speed
Signal Connectors
Front Board Connector
4 Pair Right Angle Receptacle
Part Number 6469001-1
Backplane Connector
4 Pair Vertical Header
Part Number 6469002-1
Note: Part Numbers are RoHS compliant.
8
Catalog 3-1773445-8 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are U.S. equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Product Defined in AdvancedTCA/AdvancedTCA 300 Specifications (Continued)
Solutions for AdvancedTCA, AdvancedTCA 300,
MicroTCA, and AdvancedMC Standards
AdvancedMC, AdvancedTCA,
AdvancedTCA 300, MicroTCA and
PICMG are trademarks of PICMG-PCI
Industrial Computer Manufacturers
Group Incorporated.
Product Defined in AdvancedTCA/
AdvancedTCA 300 Specifications
AdvancedTCA Zone 2
Z-PACK HM-Zd High Speed
Signal Connectors (Continued)
4 Pair Right Angle
Receptacle Assemblies
Ref.
Typ.
Ref.
Typ.
Ref.
Typ.
To p Surface of
Daughtercard
Ref.
Ref.
Typ.
Ref.
Ref.
Ref.
Ref.
A
All Plated
Thru Holes
PCB Hole Dim.
Drilled Hole = 0.7000 ±0.025 [.02756 ±.0010]
Finished Hole = 0.60 ± 0.05 [.024 ± .002]
Cu Thickness = 0.375 ± 0.0125 [.0148 ± .00049]
SnPb Thickness = 0.007 ± 0.003 [.0003 ± .0001]
0.75
[.030]
1.00 ± 0.10
[.039 ± .004]
19.35 ± 0.08
[.762 ± .003]
21.35 ± 0.08
[.841 ±.003]
27.90
[1.098]
2.50
[.098]
2.00
[.079]
8.70
[.343]
10.70 ± 0.16
[.421 ± .006]
17.20 ± 0.14
[.677 ± .006]
1.50
[.059]
Ref.
Typ.
1.50
[.059]
Typ.
1.50
[.059]
Typ.
2.50
[.098] 9x2.50 [.098] =
22.50 [.886]
1.50 ± 0.20
[.059 ± .008]
2.20
[.087]
15.67 ± 0.05
[.617 ± .002]
3.68
[.145]
1.50
[.059]
3.00
[.118]
Recommended PC Board Layout
Daughter Board, Component Side Shown
1
1
Note: For finishes other than
tin-lead, reference Application
Specification 114-13059.
Application Tooling
Part Number Column Module
Signals Grounds Insertion Repair
Count Length
Receptacle Housing Chiclet
(Dim. A) Removal Removal
16469001-1110 25.00 80 40 91347-1 1583224-1 1583248-1
.984
6469286-1 12 30.00 96 48 91347-3 1583224-2 1583248-1
1.181
6469294-1 15 37.50 120 60 91347-2 1583224-3 1583248-1
1.476
6469061-1 20 50.00 160 80 91347-4 1583224-4 1583248-1
1.969
1AdvancedTCA Zone 2 Daughtercard Connector.
Note: Part Numbers are RoHS compliant.
9
Catalog 3-1773445-8 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are U.S. equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Product Defined in AdvancedTCA/AdvancedTCA 300 Specifications (Continued)
Solutions for AdvancedTCA, AdvancedTCA 300,
MicroTCA, and AdvancedMC Standards
AdvancedMC, AdvancedTCA,
AdvancedTCA 300, MicroTCA and
PICMG are trademarks of PICMG-PCI
Industrial Computer Manufacturers
Group Incorporated.
Product Defined in AdvancedTCA/
AdvancedTCA 300 Specifications
AdvancedTCA Zone 2
Z-PACK HM-Zd High Speed
Signal Connectors (Continued)
4 Pair
Vertical Pin Header
Assemblies
Ref.
Typ.
Ref.
Typ.
Ref.
Typ.
Ref.
Typ.
A
All Plated
Thru Holes
2.50
[.098]
2.95 ± 0.05
[.116 ± .002]
6.35
[.250]
Ref.
13.40 ± 0.08
[.528 ± .003]
5.675
[.223]
23.43
[.922]
2.50
[.098]
Max.
1.50
[.059]
Ref.
Ref.
Ref.
0.75
[.030]
Typ.
1.50
[.059]
Typ.
2.50
[.098]
9x2.50 [.098] =
22.50 [.886]
1.50
[.059]
3.00
[.118]
Recommended PC Board Layout
Backplane Component Side Shown
PCB Hole Dim.
Drilled Hole = 0.7000 ± 0.025 [.02756 ± .0010]
Finished Hole = 0.60 ± 0.05 [.024 ± .002]
Cu Thickness = 0.375 ± 0.0125 [.0148 ± .00049]
SnPb Thickness = 0.007 ± 0.003 [.0003 ± .0001]
1
1
+ 0.08
– 0.20
+ .003
– .008
19.65
[.774 ]
Note: For finishes other than
tin-lead, reference Application
Specification 114-13059.
Application Tooling
Part Tail Mating Column Module
Signals Grounds Insertion Repair
Number Length Pin Count Length Pin Pin Housing Pin
Length (Dim. A) Header Removal Removal Insertion
16469002-112.50 5.30 10 25.00 80 40 91349-1 1583237-1 1583220-1 1583255-1
.098 .209 .984
26469046-122.50 5.30 10 25.00 80 40 91349-1 1583237-1 1583220-1 1583255-1
.098 .209 .984
6469074-1 1.80 5.30 10 25.00 80 40 91349-1 1583237-1 1583220-1 1583255-1
.071 .209 .984
6469287-1 2.50 5.30 12 30.00 96 48 91349-3 1583237-1 1583220-1 1583255-1
.098 .209 1.181
6469296-1 2.50 5.30 15 37.50 120 60 91349-2 1583237-1 1583220-1 1583255-1
.098 .209 1.476
6469062-1 2.50 5.30 20 50.00 160 80 91349-4 1583237-1 1583220-1 1583255-1
.098 .209 1.969
6469099-1 1.80 5.30 20 50.00 160 80 91349-4 1583237-1 1583220-1 1583255-1
.071 .209 1.969
1AdvancedTCA Zone 2 Backplane Connector.
2Shallow Wall for Daughtercards thicker than 3.50 [.138].
Note: Part Numbers are RoHS compliant.
10
Catalog 3-1773445-8 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are U.S. equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Product Defined in AdvancedTCA/AdvancedTCA 300 Specifications (Continued)
Solutions for AdvancedTCA, AdvancedTCA 300,
MicroTCA, and AdvancedMC Standards
AdvancedMC, AdvancedTCA, AdvancedTCA 300, MicroTCA and PICMG are trademarks
of PICMG-PCI Industrial Computer Manufacturers Group Incorporated.
Product Defined in AdvancedTCA/
AdvancedTCA 300 Specifications
Z-PACK HM-Zd RTM Board Connector for AdvancedTCA Zone 3 Standard
Ref.
Ty p .
Ref.
Ty p .
Ref.
Ty p .
Top Surface of
Daughtercard
Ty p .
Ref.
Ty p .
Ref.
Ref.Ref.
Ref.
Ref.
Ref.
Ref.
A
All Plated
Thru Holes
1.65
[.065]
19.65
[.774]
23.35
[.919]
34.55
[1.360]
2.50
[.098]
2.00
[.079]
6.90
[.272]
Ref.
10.45
[.411]
Ref.
6.35
[.250]
5.30
[.209]
Ref.
17.20
[.677]
1.50
[.059]
Ref.
Ty p .
1.50
[.059]
Ty p .
1.50
[.059]
Ty p .
2.50
[.098] 9 x 2.50 [.098] =
22.50 [.886]
1.50 ± 0.20
[.059 ± .008]
2.20
[.087]
Ref.
17.68
[.696]
Ref.
5.675
[.223]
1.50
[.059]
3.00
[.118]
Recommended PC Board Layout
Component Side Shown
17.32
[.682]
Ref.
1
PCB Hole Dim.
Drilled Hole = 0.7000 ± 0.025 [.02756 ± .0010]
Finished Hole = 0.60 ± 0.05 [.024 ± .002]
Cu Thickness = 0.375 ± 0.0125 [.0148 ± .00049]
SnPb Thickness = 0.007 ± 0.003 [.0003 ± .0001]
1
AdvancedTCA Zone 3
Z-PACK HM-Zd
High Speed, Co-Planar
RTM Board Connector
4 Pair Right Angle Header
Part Number 6469048-1
Part Number 6469375-1
Front Board Connector
4 Pair Right Angle
Receptacle
Part Number 6469001-1
(see page 8)
4 Pair Right Angle
Pin Header Assemblies
Application Tooling
Part Tail
Mating Column Module
Signals Grounds Insertion Repair
Number Length Pin Count Length Pin Housing Chiclet
Length (Dim. A) Header Removal Removal
16469048-1 2.20 5.30 10 25.00 80 40 91378-1 1804174-1 1804177-1
.087 .209 .984
16469375-1 2.20 5.30 12 30.00 96 48 91378-3 1804174-1 1804177-1
.087 .209 1.181
Note: Part Numbers are RoHS compliant.
Note: For finishes other than
tin-lead, reference Application
Specification 114-13059.
11
Catalog 3-1773445-8 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are U.S. equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Product Defined in AdvancedTCA/AdvancedTCA 300 Specifications (Continued)
Solutions for AdvancedTCA, AdvancedTCA 300,
MicroTCA, and AdvancedMC Standards
AdvancedMC, AdvancedTCA,
AdvancedTCA 300, MicroTCA and
PICMG are trademarks of PICMG-PCI
Industrial Computer Manufacturers
Group Incorporated.
Product Defined in AdvancedTCA/
AdvancedTCA 300 Specifications
The Co-Planar Universal Power Module
(UPM) is specifically designed to meet the
need of connecting two printed circuit
boards on the same plane. The UPM con-
nector features hot-pluggable, 16 Amp
power industry proven contacts and have
three sequencing levels.
Co-Planar UPM for AdvancedTCA Zone 3 Power Applications
Right Angle Receptacle
FEATURES
•Hot-Pluggable contact design
•16 Amp per contact (on 4-position)
•250 cycle durability
•Touch-safe receptacle
No. of Right-Angle
Circuit High Power 16 Amps/
Positions Contact Part Numbers
3 120943-1
4 120943-2
5 120943-3
6 120943-4
7 120943-5
8 120943-6
9 120943-7
Right Angle Plug
Number of Dimension High Power 16 Amps/ Part Number
Positions L Contact Sequence* Pattern
12.00 M,M,M 5-5223961-1
3.472 M,L,M 5-5223963-1
** **
15.00 L,L,L,L 120954-1
4.591 L,M,S,S 120954-2
** **
18.00 L,L,L,L,L 120955-1
5.709 M,M,L,M,M 120955-2
** **
21.00 L,L,L,L,L,L 120956-1
6.827 L,M,S,S,S,S 120956-2
** **
724.00 L,L,L,L,L,L,L 120957-1
.945 L,S,S,L,S,S,L 120957-2
827.00 L,L,L,L,L,L,L,L 120958-1
1.063 L,M,S,S,S,S,S,S 120958-2
*Sequencing Reads left-to-right along mating face.
L (long) = 10.90 [.429], M (medium) = 9.30 [.366], S [short] = 7.68 [.302]
**Other sequence patterns available. See on-line customer drawing.
Note: Part Numbers are RoHS compliant.
12
Catalog 3-1773445-8 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are U.S. equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Product Defined in AdvancedTCA/AdvancedTCA 300 Specifications (Continued)
Solutions for AdvancedTCA, AdvancedTCA 300,
MicroTCA, and AdvancedMC Standards
AdvancedMC, AdvancedTCA, AdvancedTCA 300, MicroTCA and PICMG are trademarks
of PICMG-PCI Industrial Computer Manufacturers Group Incorporated.
Product Defined in AdvancedTCA/
AdvancedTCA 300 Specifications
Tyco Electronics Z-PACK TinMan product is
a new high speed, 100-Ohm Impedance
matched connector with extreme signal
density. This connector can be pinned out
for lower speed signal ended lines and exists
in 3, 4, and 5 pair per column versions.
Z-PACK TinMan Connectors for AdvancedTCA Standards — Zone 3
FEATURES:
•High speed: +10 Gbps
• High Density: 25 pair/cm [66
pairs/in]
• 3, 4, and 5 pair per column
versions (5 pair shown)
• Available with or without end walls
for pin protection
• Designed to meet Telcordia
requirements
Z-PACK TinMan Receptacles
No. of Pairs Columns Part Number Dimensions
Length Width
8 1934226-1 31.81 15.35
31.25 .604
16 1934229-1 31.81 30.55
1.25 1.203
8 1934222-1 31.81 15.35
41.25 .604
16 1934225-1 31.81 30.55
1.25 1.203
8 1934218-1 31.81 15.35
51.25 .604
16 1934221-1 31.81 30.55
1.25 1.203
Z-PACK TinMan Headers
No. of Pairs Columns Part Number Dimensions End
Length Width Walls
1469974-1 31.81 15.35 N
81.25 .604
1469977-1 31.81 18.05 Y
31.25 .710
1934034-1 31.81 30.55 N
16 1.25 1.203
1934037-1 31.81 33.25 Y
1.25 1.31
1469793-1 31.81 15.35 N
81.25 .604
1469795-1 31.81 18.05 Y
41.25 .710
1934026-1 31.81 30.55 N
16 1.25 1.203
1934029-1 31.81 33.25 Y
1.25 1.31
1469735-1 31.81 15.35 N
81.25 .604
1469737-1 31.81 18.05 Y
51.25 .710
1934018-1 31.81 30.55 N
16 1.25 1.203
1934021-1 31.81 33.25 Y
1.25 1.31
15.35 ± 0.05
[.604 ± .002]
31.81 ± 0.05
[1.252 ± .002]
Note: Part Numbers are RoHS compliant.
13
Catalog 3-1773445-8 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are U.S. equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Product Defined in AdvancedTCA/AdvancedTCA 300 Specifications (Continued)
Solutions for AdvancedTCA, AdvancedTCA 300,
MicroTCA, and AdvancedMC Standards
AdvancedMC, AdvancedTCA,
AdvancedTCA 300, MicroTCA and
PICMG are trademarks of PICMG-PCI
Industrial Computer Manufacturers
Group Incorporated.
Product Defined in AdvancedTCA/
AdvancedTCA 300 Specifications
Tyco Electronics is developing an
AdvancedMC connector designed to meet
the PICMG AdvancedMC specification for
use with AdvancedTCA carrier boards and
other related applications. The AdvancedMC
product family from Tyco Electronics will
include single-part Z-Pluggable connectors
in Extended (B+ and A+B+) styles.
www.tycoelectronics.com/products/atca
Product Specification
108-2277
Application Specification
114-13181
AdvancedTCA — Advanced Mezzanine Card (AdvancedMC) Connectors
FEATURES
• B+ style available now
• A+B+ styles planned
– Targeted for high-speed differ-
ential applications (3.125 Gb/s
to 10+ Gb/s):
– Precision formed compliant pin
reduces stub effect and offers
excellent retention to provide a
reliable connect
• Suitable for assembly processes
using flat-rock tooling
Part Number Plating Inserts Pegs
1367703-1䢇SnPb No No
1367703-2䢇Sn No No
1-1367703-1䢇SnPb Yes No
1-1367703-2䢇Sn Yes No
2-1367703-1䢇SnPb No Yes
2-1367703-2䢇Sn No Yes
3-1367703-1䢇SnPb Yes Yes
3-1367703-2䢇Sn Yes Yes
Note: Part Numbers are RoHS compliant except: 䢇Indicates “5 of 6 compliant”
(lead in solderable interface only).
65.15 ±0.05
[2.565 ±.002]
71.50 ±0.05
[2.815 ±.002]
4.10 ±0.05
[.161 ±.002]
4.10 ±0.05
[.161 ±.002]
21.85 ±0.05
[.860 ±.002]
3.90 ±0.05
[.154 ±.002]
6.00
[.236]
1.90 ±0.08
[.075 ±.003]
Housing
2 Plcs.
13.70
[.539]
Max.
Contact
Insert, Threaded,
2 Plcs., Optional
+0.00
–0.10
+.000
–.004
0.65
[.026 ]
65.15 ±0.05
[2.565 ±.002]
71.50 ±0.05
[2.815 ±.002]
4.10 ±0.05
[.161 ±.002]
21.85 ±0.05
[.860 ±.002]
3.90 ±0.05
[.154 ±.002]
6.00
[.236]
2 Plcs.
14.00
[.551]
Ref.
5.80
[.228]
2 Plcs.
1.90 ±0.08
[.075 ±.003]
Housing
13.70
[.539]
Max.
Contact
Optional
Pegs
Insert, Threaded,
2 Plcs., Optional
+ 0.00
– 0.10
+.000
–.004
0.65
[.026 ]
AdvancedMC Connector, Style B+
Part Number 1367703-X
14
Catalog 3-1773445-8 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are U.S. equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Product Defined in AdvancedTCA/AdvancedTCA 300 Specifications (Continued)
Solutions for AdvancedTCA, AdvancedTCA 300,
MicroTCA, and AdvancedMC Standards
AdvancedMC, AdvancedTCA,
AdvancedTCA 300, MicroTCA and
PICMG are trademarks of PICMG-PCI
Industrial Computer Manufacturers
Group Incorporated.
Product Defined in AdvancedTCA/
AdvancedTCA 300 Specifications
MULTI-BEAM XL product has recently been
specified as the Power Entry Module (PEM)
connector for use in AdvancedTCA 300
applications. This new MULTI-BEAM XL
connector is a blind-mateable board-to-board
power distribution connection system that
is designed to meet the AdvancedTCA 300
specification. This new addition to the
Tyco Electronics MULTI-BEAM XL product
line is selectively loaded and available with
press-fit or solder tail termination styles.
MULTI-BEAM XL Connectors for AdvancedTCA 300 Standard
FEATURES:
• Meets the AdvancedTCA 300
Specification
• 55 Amp Single Power Contact,
4 Amp Single Signal Contact
• Solder or Press-Fit termination to
PCB
• Specially sequenced for the
AdvancedTCA Specification
• Custom configurable modular
design
Right Angle Receptacle
For use on PEM
Part Number 1888765-1
(Press-Fit Version)
Vertical Plug
For use on backplane
Part Number 1888766-1
(Press-Fit Version)
PEM Connector
79.76 ±0.25
[3.140 ± .010]
11.38
[.448]
Backplane Connectors
79.76 ± 0.25
[3.140 ± .010]
14.58
[.574]
12.70
[.500] Ref.
Note: Part Numbers are RoHS compliant.
15
Catalog 3-1773445-8 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are U.S. equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Product Defined in AdvancedTCA/AdvancedTCA 300 Specifications (Continued)
Solutions for AdvancedTCA, AdvancedTCA 300,
MicroTCA, and AdvancedMC Standards
AdvancedMC, AdvancedTCA,
AdvancedTCA 300, MicroTCA and
PICMG are trademarks of PICMG-PCI
Industrial Computer Manufacturers
Group Incorporated.
Tyco Electronics AdvancedTCA Guide
Modules are available in various sizes and
configurations and are suitable for use in
awide variety of applications including front
board, mid plane, backplane, and a Rear
Transition Module as specified in the
AdvancedTCA specification. The guide
hardware features improved locating
features to confirm guidance is maintained
across all component tolerances while the
dual-keyed pin configuration allows for
many different keying possibilities.
www.tycoelectronics.com/products/atca
Catalog 1773095
AdvancedTCA — Guide Modules
FEATURES:
• Configurations for front board and
backplane as well as midplane and
coplanar applications in the RTM
• Vertical and right angle pins to
support right angle and coplanar
board configurations
• Guide pins are available in short or
long lengths to accommodate var-
ious Tyco Electronics connectors
AdvancedTCA Guide/
Keying Modules
The AdvancedTCA Guide
Modules can be used in a
wide variety of applications.
For motherboard-to-
daughtercard applications
the vertical pin and right
angle socket are used.
This popular configuration is
further supported by our
wide offering of available
keying positions. Each of
the two keyed guide pins
and guide sockets per mod-
ule can be produced
in a variety of different key
positions. For co-planar
applications, the right angle
guide pins are used along
with the right angle guide
sockets. Both vertical and
right angle guide pins are
available in short or long
sizes, to accommodate
being used with different
Tyco Electronics connectors.
AdvancedTCA AdvancedTCA Description Part Number
Name Location
rA1 Backplane Rear Alignment Post 1469269-2
3.00 – 4.00 [.118 – .157] PCB Thickness
rA1 Backplane Rear Alignment Post 1469269-4
4.10 – 6.00 [.161 – .236] PCB Thickness
rA1 Backplane Rear Alignment Post 1469269-6
6.10 – 8.00 [.240 – .315] PCB Thickness
A2 (RTM) Rear Transition Module Right Angle Male, Keyed 1-1469372-1
K1/K2 Front Board Right Angle Female, Keyed 1-1469373-1
K1/K2 Front Board Right Angle Female, Unkeyed Dummy 9-1469373-9
rK1 Rear Transition Right Angle Female 1469374-1
A1 Backplane Vertical Male, Keyed, Short 1-1469387-1
A2 Mid-Plane Vertical Male, Keyed, Long 1-1469388-1
Note: Part Numbers are RoHS compliant.
rA1 A2 (RTM) K1/K2
rK1 A1 A2
Product Defined in AdvancedTCA/
AdvancedTCA 300 Specifications
16
Catalog 3-1773445-8 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are U.S. equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Product Defined in MicroTCA Specification
Solutions for AdvancedTCA, AdvancedTCA 300,
MicroTCA, and AdvancedMC Standards
AdvancedMC, AdvancedTCA,
AdvancedTCA 300, MicroTCA and
PICMG are trademarks of PICMG-PCI
Industrial Computer Manufacturers
Group Incorporated.
Part Number 1469820-X
Product Specification
108-2254
Application Specification
114-13180
0.55 ±0.05
[.022 ±.002]
Typ.
After Plating
2.40 ±0.10
[.094 ±.004]
72.00 ±0.20
[2.835 ±.008]69.30
[2.728]
58.50
[2.303]
1.50
[.059]
2.25
[.089]
0.20
[.008]
6.00
[.236]
1.35
[.053]
4.175
[.1644]
31.22
[1.229]
BSC
BSC
7.40 ±0.10
[.291 ±.004]
Recommended Mounting Holes
12.30 ±0.10
[.484 ±.004]
5.80 ±0.10
[.228 ±.004]
Measured to Bottom
of Card Slot
Position No. 1 Position No. 1
2 Plcs.
Optional Holes
Used with
Part Number
1469944-2
C
L of
Card Slot
C
L of
Card Slot
Position No. 170
Optional
Alignment Post Center Column
of Holes Are
Ground Positions 1.50
[.059]
Vertical AdvancedMC Connector for MicroTCA Applications
FEATURES
• Press-fit connector per
MicroTCA.0 Specification
• 170 lines
•Connector designed so that
custom load patterns are easily
created
• Single overmolded wafer design
•Fully validated electrical models
available
Product Defined in
MicroTCA Specification
Part Tail Alignment
Number Plating Post
1469820-1 Tin No
1469820-2 Tin Yes
1469820-3䢇Tin-Lead No
1469820-4䢇Tin-Lead Yes
Note: Part Numbers are RoHS
compliant except: 䢇Indicates
“5 of 6 compliant” (lead in
solderable interface only).
17
Catalog 3-1773445-8 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are U.S. equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Product Defined in MicroTCA Specification (Continued)
Solutions for AdvancedTCA, AdvancedTCA 300,
MicroTCA, and AdvancedMC Standards
AdvancedMC, AdvancedTCA,
AdvancedTCA 300, MicroTCA and
PICMG are trademarks of PICMG-PCI
Industrial Computer Manufacturers
Group Incorporated.
Product Defined in
MicroTCA Specification
The MINIPAK HD Connector is a 2-piece
board-to-board connector designed to meet
the PICMG MicroTCA specification. The
connector consists of 24 power contacts
and 72 high density signal contacts.
Application
Designed for a broad range of applications
in Telecom Edge and customer premise
equipment, CATV hardware, wireless base
stations and other communication equip-
ment manufactured to the MicroTCA
(PICMG AdvancedMC 1.0) specification.
Rugged contact design and post-plated 30
micro-inch gold plating provides long-term
reliability in demanding environments.
Electrical Characteristics
Current Ratings — tested in
accordance with IEC 60512-5-2
Test 5a requirements:
Signal Contacts — .625 ampere each
Power Contacts —
11.625 ampere each (PICMG MicroTCA
R1.0 requirement)
14.5 ampere each (Tyco Electronics
MINIPAK HD performance)
Dielectric Withstanding Voltage —
80 volts rms between differential pair
conductors, general purpose conductors,
and power conductors
Environmental Characteristics
Maximum Continuous Operating
Temperature — 100°C
Durability Rating — 250 cycles
Technical Documents
Tyco Electronics Product
Specification — 108-2253
PICMG Specification —
PICMG MicroTCA Standard
MINIPAK HD Power Connectors
FEATURES:
• High Current Density
• 24 power contacts capable of
carrying 14.5 Amps per contact
when fully energized
• Industry proven UPM power
contacts
• Hot Plug contact design controls
arc during hot mate/un-mate
cycles
• 3 Mating Levels:
1st — Power/Ground,
2nd — Power/Signal,
3rd — Short/Enable Signal
• Tin Plated (fully RoHS compliant)
or tin-lead (5 of 6 RoHS compli-
ant) pcb tails
18
Catalog 3-1773445-8 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are U.S. equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Product Defined in MicroTCA Specification (Continued)
Solutions for AdvancedTCA, AdvancedTCA 300,
MicroTCA, and AdvancedMC Standards
AdvancedMC, AdvancedTCA,
AdvancedTCA 300, MicroTCA and
PICMG are trademarks of PICMG-PCI
Industrial Computer Manufacturers
Group Incorporated.
Product Defined in
MicroTCA Specification
Vertical Receptacle
Part Number 1469920-1䢇
(tin-lead pcb tails)
Part Number 1469920-2
(tin plated pcb tails)
The vertical connector
consists of 72 2 mm pin
and 24 UPM receptacle
contacts. The contacts
have compliant pin tails for
press-fit applications.
56.20
[2.213]
Ref.
13.50
[.531]
Ref.
20.62
[.812]
2Plcs.
9.50
[.374] Ref.
5.50
[.217] Ref.
4.75
[.187] Ref.
11.12
[.438] Ref.
22.00
[.866]
Ref.
23.30 ±0.10
[.917 ±.004]
39.30 ±0.10
[1.547 ±.004]
Ø3.98 ±0.08
[.157 ±.003]
Ø 3.98 ±0.08
[.157 ±.003]
Position 1Position 13
7.81
[.307]
0.50
[.020]
Ref.
72 Plcs.
Ref.
17.00 ±0.20
[.670 ±.008]
2 Plcs.
61.10 ±0.20
[2.406 ±.008]
0.75 ±0.05
[.030 ±.002]
11.50
[.452]
Typ. Chamfer
x 45°
1.00
[.039]
To Centerline of Cavity
Ref.
5.50
[.217]
Sense Pin Location (1A)
0.40
[.015] 2.57
[.101]
2.00
[.079]
2.00
[.079]
Ref.
72 Plcs.
MINIPAK HD Power
Connectors (Continued)
Note: Part Numbers are RoHS compliant except: 䢇Indicates “5 of 6 compliant” (lead in solderable interface only).
19
Catalog 3-1773445-8 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are U.S. equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Product Defined in MicroTCA Specification (Continued)
Solutions for AdvancedTCA, AdvancedTCA 300,
MicroTCA, and AdvancedMC Standards
AdvancedMC, AdvancedTCA,
AdvancedTCA 300, MicroTCA and
PICMG are trademarks of PICMG-PCI
Industrial Computer Manufacturers
Group Incorporated.
Product Defined in
MicroTCA Specification
Right Angle Plug
Part Number 1469921-1
(solder tail)
Part Number 1469922-1
(press-fit)
Part Number 1469922-2䢇
(press-fit, tin-lead pcb tails)
The right angle connector
consists of 72 high density
signal pins and 24 right
angle UPM blades in a 2 x
12 configuration. There are
8 power blades that are
longer for first mate/break
last ground sequencing.
The right angle connectors
come in 2 piece tail varia-
tions, press-fit and solder.
3.00
[.118] Ref.
Ref.
Reference Back Plane Surface
20.70
[.815] Ref.
1.50
[.060] Ref.
32.35
[1.274] Ref.
19.00
[.748] Ref.
29.50
[1.161] Ref.
35.50
[1.398] Ref.
15.15
[.600]
Ref. Dim.
To Signal
Column A
23.60
[.929] Ref.
39.60 ±0.10
[1.559 ±.004]
17.40 ±0.10
[.685 ±.004]
11.85 ±0.10
[.467 ±.004]
19.12 ±0.10
[.753 ±.004]
9.30 ±0.13
[.366 ±.005]
12.00 ±0.10
[.472 ±.004]
22.12 ±0.15
[.871 ±.006]
Section A - A
2.55 ±0.20
[.100 ±.008]
20.20 ±0.10
[.795 ±.004]
Ground
Contacts
Positions
P4 Thru P11
Top Surface
of PCB Aligned With
Row B Contact C
L
Position 13
Position 1
18.62
[.733]
Sense Pin
Location
(1A)
0.40
[.016]
Ref.
Typ.
Ref.
11.50
[.453]
Ref.
3.37
[.133]
10.90 ±0.13
[.429 ±.005]
3.00
[.118] Ref.
Ref.
Reference Back Plane Surface
20.70
[.815] Ref.
1.50
[.060] Ref.
32.35
[1.274] Ref.
19.00
[.748] Ref.
29.50
[1.161] Ref.
35.50
[1.398] Ref.
15.15
[.600]
Ref. Dim.
To Signal
Column A
23.60
[.929] Ref.
39.60 ±0.10
[1.559 ±.004]
17.40 ±0.10
[.685 ±.004]
11.85 ±0.10
[.467 ±.004]
19.12 ±0.10
[.753 ±.004]
9.30 ±0.13
[.366 ±.005]
12.00 ±0.10
[.472 ±.004]
22.12 ±0.15
[.871 ±.006]
Section A - A
3.30 ±0.20
[.130 ±.008]
20.20 ±0.10
[.795 ±.004]
Ground
Contacts
Positions
P4 Thru P11
Top Surface
of PCB Aligned With
Row B Contact C
L
Position 13
Position 1
18.62
[.733]
Sense Pin
Location
(1A)
0.40
[.016]
Ref.
Typ.
Ref.
11.50
[.453]
Ref.
3.37
[.133]
10.90 ±0.13
[.429 ±.005]
MINIPAK HD Power
Connectors (Continued)
Part Number 1469921-1
Part Number 1469922-1
Note: Part Numbers are RoHS
compliant except: 䢇Indicates
“5 of 6 compliant” (lead in
solderable interface only).
20
Catalog 3-1773445-8 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are U.S. equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Product Compliant to xTCA or AdvancedMC Specifications
Solutions for AdvancedTCA, AdvancedTCA 300,
MicroTCA, and AdvancedMC Standards
AdvancedMC, AdvancedTCA, AdvancedTCA 300, MicroTCA and PICMG are trademarks
of PICMG-PCI Industrial Computer Manufacturers Group Incorporated.
Tyco Electronics has released new stacked
RJ45 modular jacks designed to meet both
AdvancedTCA and AdvancedMC standards.
The offset has been designed to fit the
faceplate and board layout in AdvancedTCA
and full-size AdvancedMC modules, while
providing the port density of the stacked
configuration. These jacks are shielded
and include panel ground springs for EMI
containment. They are available in 2x1,
2x4, 2x6, and 2x8 configurations, with and
without LEDs, and are designed for GigE
performance.
www.tycoelectronics.com/products/atca
Catalog 82066
Stacked RJ45 Modular Jacks for AdvancedTCA, AdvancedMC Standards
FEATURES
• Offset designed to meet both
AdvancedTCA and AdvancedMC
standards
• Category 5 Performance
• Available in 2x1, 2x4, 2x6, and 2x8
configurations
• Press-fit termination to the board
• Available with various LED options
Part Number LED #1 LED #2 LED #3 LED #4 Ground Shield Side
(3.27 mm Offset) Configuration (Lower Port (Upper Port (Upper Port (Lower Port Clips Ground Pins
Left Side) Left Side) Right Side) Right Side)
1888652-1 2x1 None None None None No Yes
1888652-2 2x1 None None None None Yes Yes
1888653-1 2x1 Green Green Green Green No Yes
1888653-2 2x1 Green Green Green Green Yes Yes
1888653-3 2x1 Yellow Yellow Green Green Yes Yes
1888653-4 2x1 Green Green Yellow Yellow Yes Yes
1888506-1 2x4 None None None None No Yes
1888506-2 2x4 None None None None Yes Yes
1888507-1 2x4 Green Green Green Green No Yes
1888507-2 2x4 Green Green Green Green Yes Yes
1888507-3 2x4 Green Green Yellow Yellow No Yes
1888507-4 2x4 Green/Yellow Green/Yellow Green/Yellow Green/Yellow Yes Yes
1888508-1 2x6 None None None None No Yes
1888508-2 2x6 None None None None Yes Yes
1888509-1 2x6 Green Green Green Green No Yes
1888509-2 2x6 Green Green Green Green Yes Yes
1888509-3 2x6 Green Green Yellow Yellow No Yes
1888509-4 2x6 Green/Yellow Green/Yellow Green/Yellow Green/Yellow Yes Yes
1888654-1 2x8 None None None None No No
1888654-2 2x8 None None None None No Yes
1888654-3 2x8 None None None None Yes Yes
1888654-4 2x8 None None None None Yes No
1888655-1 2x8 Green Green Green Green No No
1888655-2 2x8 Green Green Green Green No Yes
1888655-3 2x8 Green Green Green Green Yes Yes
1888655-4 2x8 Green Green Green Green Yes No
1888655-5 2x8 Green Green Yellow Yellow No Yes
Note: Part Numbers are RoHS compliant.
Product Compliant to xTCA
or AdvancedMC Specifications
21
Catalog 3-1773445-8 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are U.S. equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Product Compliant to xTCA or AdvancedMC Specifications (Continued)
Solutions for AdvancedTCA, AdvancedTCA 300,
MicroTCA, and AdvancedMC Standards
AdvancedMC, AdvancedTCA,
AdvancedTCA 300, MicroTCA and
PICMG are trademarks of PICMG-PCI
Industrial Computer Manufacturers
Group Incorporated.
To meet the requirements for I/O connectors
on AdvancedTCA and AdvancedMC cards,
Tyco Electronics has released new low
profile RJ45 modular jacks. The offset from
the board is designed such that it fits in
an AdvancedMC half height faceplate.
These jacks are shielded and include
panel ground springs for EMI containment.
They are available in single port and 1x4
configurations, with and without LEDs, and
are designed for GigE performance.
Low Profile RJ45 Modular Jacks
FEATURES
• Category 5e Performance
• Available in single port and 1x4
configurations
• Low profile meets half height
requirements. 4.20 mm above
PCB, 7.38 mm below PCB
• Press-fit termination to the board
• Available with various LED options
Part Number Configuration LED (Left) LED (Right)
1888250-1 1x1 Green Yellow
1888250-2 1x1 Green/Yellow Green/Yellow
1888250-3 1x1 None None
1888250-4 1x1 Green Green
1888251-1 1x4 Green Yellow
1888251-2 1x4 Green/Yellow Green/Yellow
1888251-3 1x4 None None
1888251-4 1x4 Green Green
Note: Part Numbers are RoHS compliant.
Product Compliant to xTCA
or AdvancedMC Specifications
22
Catalog 3-1773445-8 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are U.S. equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Product Compliant to xTCA or AdvancedMC Specifications (Continued)
Solutions for AdvancedTCA, AdvancedTCA 300,
MicroTCA, and AdvancedMC Standards
AdvancedMC, AdvancedTCA,
AdvancedTCA 300, MicroTCA and
PICMG are trademarks of PICMG-PCI
Industrial Computer Manufacturers
Group Incorporated.
Infiniband is a trademark of Infiniband
Trade Association.
The SFP (Small Form-Factor Pluggable)
supports hot swap of various types of fiber
optics and copper based transceivers into
host equipment. This allows the customer to
have a flexible change between different
protocols. The different applications are
Fiber Channel, Ethernet, and Infiniband.
SFP board cages exist in multiple versions
that fit AdvancedTCA systems.
The one port cages are available in a
one piece design (press-fit or solder) and a
two piece design (press-fit, solder or SMT).
Ganged versions (available in 1x6; 1x4;
1x2) are available with or without light
pipes. The ganged product has the
option of integrated host connector.
Tyco Electronics is currently developing
stacked versions (2x4 as primary option)
that fit AdvancedTCA requirements.
www.tycoelectronics.com/product/atca
www.sfp.tycoelectronics.com
Catalog 1773408
Flyer 1654720 / 1654095 / 1773078
AdvancedTCA — Front & Rear I/O Connectors – SFP Modules
FEATURES
• Products according to MSA
(Multi-Source Agreement)
• Uses 20 positions PT connector
• Hot Swappable
• Three stage sequencing
• Supports data-rates up to 5 Gbps
•Chassis ground for pass through
EMI protection to 12.5 Gbps
• Accepts copper and fiber optic
transceivers
•Direct attach copper cable assem-
blies available with or without
active equalization.
SFP Modules
Part Number Port Insertion Connector Height
Configuration Style Included Profile
Stacked
1658628-1 2x1 Press-fit Yes Low
1658629-1 2x4 Press-fit Yes Low
1658894-1 2x6 Press-fit Yes Low
Ganged
1761014-1 1x2 Press-fit No —
1658744-1 1x4 Press-fit No —
1761015-1 1x6 Press-fit No —
Single
6367035-1 1x1 Solder Tail No Standard
6367034-1 1x1 Solder Tail No Standard
1489669-1 1x1 Press-fit No Standard
1489779-1 1x1 Press-fit No Standard
Note: Part Numbers are RoHS compliant.
Product Compliant to xTCA
or AdvancedMC Specifications
23
Catalog 3-1773445-8 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are U.S. equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Product Compliant to xTCA or AdvancedMC Specifications (Continued)
Solutions for AdvancedTCA, AdvancedTCA 300,
MicroTCA, and AdvancedMC Standards
AdvancedMC, AdvancedTCA, AdvancedTCA 300, MicroTCA and PICMG are trademarks
of PICMG-PCI Industrial Computer Manufacturers Group Incorporated.
Thermal Interface Products are mandatory
for reducing the waste heat and cooling
the system in the most efficient way. Waste
heat reduces the silicon chip reliability and
performance. In addition to the products
Tyco Electronics is offering such as Heat
Sinks, Heat Pipes and CHIP COOLERs,
in all shapes and sizes, Tyco Electronics
offers state of the art Thermal Management
Services. Thermal Management is the
design practice of moving waste heat to
locations that do not affect the equipment or
overall device performance. Each Thermal
Product can be fully customized
to fulfill the specific requested system
cooling requirements.
www.tycoelectronics.com/products/atca
www.thermal.tycoelectronics.com
Catalog 1309431
Flyer 1308225
AdvancedTCA — Thermal Products & Services
FEATURES
• Tyco Electronics thermal solutions
provide optimum cooling for
active components like BGA (Ball
Grid Array), MCM modules, opti-
cal modules and power devices
• Compatible to most AdvancedTCA
connector form factors, low
profile solutions
• Off the shelf as well as customized
products
• Heat pipe technology in combin-
ation with passive heat sinks
• Advanced thermal conductive
polymer for weight and cost
reduction
• Full CFD (Computational Fluid
Dynamics) simulation and analy-
sis, optimum Thermal design
numerical and analytical
approaches
Tyco Electronics’ MRJ21 receptacle is a
high density I/O interconnect. This high
density connector supports AdvancedMC
Mid-size and Full-size module face plates
and AdvancedTCA face plates. It can also
be used for Rear I/O via Rear Transition
Modules (RTMs), as well as in
AdvancedTCA Zone 3 applications.
The MRJ21 connector is fully shielded and
provides density savings for current 10/100
or GbE RJ45/RJ21 applications. The low
profile and narrow width design will allow
more ports to be packed into less space.
Tyco Electronics offers a full end-user
solution with cleaner cabling solutions over
RJ45s, and patch panels for plug-and-play
environment, including data centers and
zone cabled or open office environments.
www.tycoelectronics.com/products/atca
AdvancedTCA — Front & Rear I/O Connectors — MRJ21 Receptacles
FEATURES
• 1.5 to 3 times the port density
of stacked Mod Jacks (RJ45).
3times the port density of RJ21
• Contact layout and footprint for
differential pairs creates reduced
cross-talk and built in compensa-
tion
• Connector is designed to meet or
exceed Cat 5e cross-talk
• Fully shielded system to
control EMI (Electro-magnetic
Interference)
• Robust die cast cable covers pro-
vide 45 degrees left or right cable
exit for ease of routing
•1 mm pair spacing, 1.5 mm pair
to pair spacing
• Patch panels and cable manage-
ment solutions available
Product Compliant to xTCA
or AdvancedMC Specifications
MRJ21 PCB Receptacles (48-position)
Part Number Panel PCB
Grounds Termination
1761482-1 No Solder
1761482-2 Yes Solder
1761482-4 No Press-Fit
Screwlocks sold separately
Receptacle Screwlocks
Part Number Panel
Thickness
1339381-1 < 1mm
1339381-2 > 1mm to
< 2mm
Note: Part Numbers are RoHS compliant.
24
Catalog 3-1773445-8 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are U.S. equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Product Compliant to xTCA or AdvancedMC Specifications (Continued)
Solutions for AdvancedTCA, AdvancedTCA 300,
MicroTCA, and AdvancedMC Standards
AdvancedMC, AdvancedTCA,
AdvancedTCA 300, MicroTCA and
PICMG are trademarks of PICMG-PCI
Industrial Computer Manufacturers
Group Incorporated.
Note: Part Numbers are RoHS
compliant.
Product Compliant to xTCA
or AdvancedMC Specifications
The new Tyco Electronics Low Profile DDR2
connector is designed for the main memory
requirements on the AdvancedTCA carrier
boards. Developed for use with a new
VLP (Very Low Profile) module from Micron
Technology, this connector meets the
AdvancedTCA height limitations on the
carrier board.
In addition, this connector offers a new
ejector design that allows airflow to reach
the memory module DRAMs for effective
cooling.
Low Profile DDR2 Connector for AdvancedTCA Standards
FEATURES
• Accepts new Micron Technology
VLP (Very Low Profile) DDR2
memory module designed
specifically for the AdvancedTCA
carrier board
• Special designed ejectors that
allow airflow to reach memory
module DRAMs for efficient
cooling
• Low module seating plane allows
for increased module space for
module components in a VLP
form factor
• Utilizes proven Tyco Electronics
DDR2 contact design for reliable
interface to the memory module
• Available in 3 solder tail lengths
and contact interface plating
options
Part Number 1888669-1
1.30 ±0.05
[.051 ±.002]
140.90
[5.547] Max.
73.00
[2.874]
2.87 ±0.25
[.113 ±.010]
For 1.60 [.063]
Thk. PCB
3.38 ±0.25
[.133 ±.010]
For 2.36 [.093]
Thk. PCB
4.20 ±0.25
[.165 ±.010]
For 3.18 [.125]
Thk. PCB
Ref. 65.00
[2.559] Ref.
0.36
[.014] Ref.
4.00
[.157] Ref.
Card Slot
7.54
[.297]
Main Body
5.54
[.218]
Extractor Tower
Key
1.90
[.075]
21.00
[.827]
8.15
[.321]
2 Plcs. Max.
2 Plcs.
Max.
3 Plcs.
21.00
[.821]
Max.
2 Plcs.
14.50
[.571]
Min.
2 Plcs.
5.00
[.197]
Min.
2 Plcs.
10.00
[.394]
Min.
2 Plcs.
0.30
[.012]
Min.
3 Plcs.
3.55
[.140]
Max.
Key Height
2.95
[.116]
Max. PCB To
Card Slot Floor
9.00
[.354]
Max.
Latch Open
6.85
[.270]
Max. Component Height in
Extractor Shadow Area
Retention
Barb
4.00
[.157]
2.50
[.098]
Min.
3 Plcs.
0.20
[.008]
Ref.
+ 0.05
– 0.08
+ .002
– .003
1.45
[.057 ]
C
L of Alignment Key
C
L of Connector
142.00
[5.591]
Max.
PCB Footprint
145.00
[5.709]
Max.
Latch Closed
165.00
[6.496]
Max.
Open Latch
25
Catalog 3-1773445-8 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are U.S. equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Product Compliant to xTCA or AdvancedMC Specifications (Continued)
Solutions for AdvancedTCA, AdvancedTCA 300,
MicroTCA, and AdvancedMC Standards
AdvancedMC, AdvancedTCA,
AdvancedTCA 300, MicroTCA and
PICMG are trademarks of PICMG-PCI
Industrial Computer Manufacturers
Group Incorporated.
Product Compliant to xTCA
or AdvancedMC Specifications
The Small Outline Dual In-Line Memory
Module (SO DIMM) is the latest in the
Tyco Electronics DIMM product line and
was specifically designed to meet the
AdvancedMC Specification. The SO DIMM
has 200 positions in a dual row design,
and features gold flash solder tail contact
plating. Available in two heights, the SO
DIMM will fit any AdvancedMC Application.
Small Outline Dual In-Line Memory Module (SO DIMM) for AdvancedMC Applications
FEATURES
• 200 positions
• Gold Flash Solder Tail Contact
Plating
Note: Part Numbers are RoHS compliant.
66.80
[2.611]
0.85
[.033]
1.35
[.053]
Part Number Stack Height Keying Feature
1981281-4 5.20 Reverse
.203
1981276-4 5.20 Standard
.203
1981287-4 9.20 Reverse
.360
1981284-4 9.20 Standard
.360
Part Number 1981281-4
As a standard for adding local PCI or Sbus
performance to Futurebus+ and VMEbus
applications, IEEE 1386 offers new levels of
performance and packaging convenience
through the mezzanine architecture.
Tyco Electronics makes it easier and more
productive to add an IEEE 1386 mezzanine
connector to your system. The surface-mount
parallel stacking connector features contacts
on a 1.0 [.039] pitch and is available in eight
stacking heights from 8 [.315] to 15 [.591]. Sizes
include the IEEE 1386 standard 64-position
version and an optional 84-position version.
Not only is the connector compatible with EIA-
700 AAAB — the connector standard for IEEE
1386 mezzanine connectors — it offers sev-
eral enhancements that make it easier to use
and more reliable. Increased plastic clear-
ance between mating connectors makes it
easier to align multiple connectors for mating,
thus eliminating stress to the solder joints dur-
ing engagement. Improved locating posts
allow fast, highly accurate hand placement of
connectors. The connectors are available with
vacuum covers for automated placement.
1.0 mm Free Height (FH) (IEEE 1386) Connectors
FEATURES:
• For board stacking applications
• High density packaging on
1.0 [.039] centerline spacing
• Available in standard 64-position
and optional 84-position sizes
• “Tape-and-reel” packaged per
EIA standards
• Board stacking heights available
from 8 [.315] to 15 [.591]
• Increased plastic clearance
eliminates stress to solder joints
during mating
• Improved locating posts provide
accurate hand or robotic placement
• Meets EIA-700 AAAB specifica-
tions for IEEE 1386 applications
Performance Characteristics
Current Rating —
1.0 ampere per contact
Contact Resistance —
30 milliohms max. (initial)
Durability — tested to 100 mating
cycles min.
Product Specification
108-2246
1.0 mm FH (IEEE 1386)
Receptacles and Plugs
without Locating Posts,
1.0 [.039] Pitch
8 [.315] thru 15 [.591]
Stacking Heights
Material and Finish
Housing — Liquid crystal polymer,
black
Contacts — Phosphor bronze; duplex
plated 0.00076 [.000030] or .00127
[.00050] min. gold on contact area,
0.00381 [.000150] min. tin on solder
area, with entire contact underplated
0.00127 [.000050] min. nickel
Vacuum Cover — Aluminum Alloy
Technical Documents
EIA-700 AAAB Specification
Application Specification
114-25045
Receptacle Part Number
No. of Height 30µ" Au Plating 50µ" Au Plating
Positions w/ pickup cap w/ pickup cap
5.37
.211 5120528-1 1-5120528-1
7.37
64 .290 5120529-1 1-5120529-1
8.37
.330 5120530-1 1-5120530-1
10.37
.408 5120531-1 1-5120531-1
5.37
.211 5120528-2 1-5120528-2
7.37
84 .290 5120529-2 1-5120529-2
8.37
.330 5120530-2 1-5120530-2
10.37
.408 5120531-2 1-5120531-2
Notes: 1. Shorter solder lands may be used per EIA-700 AAAB. However,
the 2.4 [.094] length assures optimum solder fillet regardless of
connector manufacturer.
Plug Part Number
No. of Height 30µ" Au Plating 50µ" Au Plating
Positions w/ pickup cap w/ pickup cap
6.35
.250 5120532-1 1-5120532-1
7.35
64 .289 5120533-1 1-5120533-1
8.35
.329 5120534-1 1-5120534-1
6.35
.250 5120532-2 1-5120532-2
7.35
84 .289 5120533-2 1-5120533-2
8.35
.329 5120534-2 1-5120534-2
Notes: 1. Shorter solder lands may be used per EIA-700 AAAB. However,
the 2.7 [.106] length assures optimum solder fillet regardless of
connector manufacturer.
26
Catalog 3-1773445-8 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are U.S. equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Product Compliant to xTCA or AdvancedMC Specifications (Continued)
Solutions for AdvancedTCA, AdvancedTCA 300,
MicroTCA, and AdvancedMC Standards
AdvancedMC, AdvancedTCA, AdvancedTCA 300, MicroTCA and PICMG are trademarks of PICMG-PCI Industrial Computer
Manufacturers Group Incorporated.
Note: Part Numbers are RoHS compliant.
Product Compliant to xTCA
or AdvancedMC Specifications
27
Catalog 3-1773445-8 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are U.S. equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Product Compliant to xTCA or AdvancedMC Specifications (Continued)
Solutions for AdvancedTCA, AdvancedTCA 300,
MicroTCA, and AdvancedMC Standards
AdvancedMC, AdvancedTCA,
AdvancedTCA 300, MicroTCA and
PICMG are trademarks of PICMG-PCI
Industrial Computer Manufacturers
Group Incorporated.
Product Compliant to xTCA
or AdvancedMC Specifications
Tyco Electronics Power Systems introduces
the industry's first power input management
solution for AdvancedTCA boards. The
AdvancedTCA power input module (PIM)
is designed in collaboration with industry
leading AdvancedTCA board manufacturers
and provides innovative features and
compact design. PIM modules incorporate
all the features required by AdvancedTCA
specifications (PICMG 3.0) and enable
designers to save valuable board real estate
and reduce overall board cost and time to
market compared to discrete solutions.
A Complete Power Architecture
PIM series along with Tyco Electronics’
isolated DC/DC and bus converters and
point of load modules, provide a complete
and low-cost power architectural solution
while complying with AdvancedTCA board
power requirements.
www.tycoelectronics.com/products/atca
www.power.tycoelectronics.com
Flyer PIM05-001
AdvancedTCA — Power Distribution & Management Modules
FEATURES
• 200/300 W of power (per PICMG
3.0)
• Inrush control protection
• Integrated EMI filter designed to
meet CISPR Class B Limits
• Directive 2002/95/EC RoHS com-
pliant
• 8 W of Isolated auxiliary power
supply for IPMI (3.3 V or 5 V)
• O-Ring FETs for -48 V A&B feeds
• A/B feed loss alarm
• Hot-swap control
•72 V charging voltage for holdup/
bulk capacitors
• Through-hole and surface mount
(SMT) versions
• Input under-voltage and over-volt-
age protections
• Over current and thermal protec-
tions
•UL /CSA/CE / VDE approved
PIM200/PIM300
PIM Discrete
PICMG 3.0 compliant Yes Board level
Fully tested & burned-in Yes Board level
Fully qualified Yes Board level
Parts count 1 > 100
Design-in time Lower Higher
Assembly cost Lower Higher
Yield/Repair cost Lower Higher
Time to market Lower Higher
Standard off-shelf part Yes No
Device Code Input Voltage Output Vmg/mt Connector Comcode
Power Output Type
PIM200FZ -48 V (-38 to -75 V DC) 200 W -3.3 V DC Thru Hole CC109101813
PIM200AZ -48 V (-38 to -75 V DC) 200 W -5.0 V DC Thru Hole CC109106762
PIM300FZ -48 V (-38 to -75 V DC) 300 W -3.3 V DC Thru Hole CC109113858
PIM300AZ -48 V (-38 to -75 V DC) 300 W -5.0 V DC Thru Hole CC109122322
AdvancedTCA — Power Distribution & Management Modules (Continued)
PIM series along with Tyco Electronics’ isolated DC/DC and
bus converters and point of load modules, provides a complete
and low-cost power architectural solution while complying
with AdvancedTCA power board requirements.
Isolated Bus Converters
Full Featured DC-DC Output Output Input Output Efficiency Current Form Connection Base
Converter Series Power (W) Current (A) Voltage (V) Voltage (V) (%) Share Factor Type Plate
EQW006A0B 72 W 6 A 48 V (36 – 75) 12 V (11.6 – 12.4) 92 % No Eight-Brick TH/SMT No
EQW010A0B 120 W 10 A 48 V (36 – 75) 12 V (11.4 – 12.6) 93 % No Eight-Brick TH Yes
QBW018A0B 200 W 18 A 48 V (36 – 75) 12 V (11.4 – 12.6) 94 % Yes Qtr-Brick TH Yes
QBW025A0B 300 W 25 A 48 V (36 – 75) 12 V (11.4 – 12.6) 94 % Yes Qtr-Brick TH Yes
JRB017A0B 200 W 17 A 48 V (36 – 75) 12 V (11.7 – 12.3) 92 % Yes Half-Brick TH Yes
Non-Isolated DC-DC Converters
Austin Lynx Output Input Voltage Output Voltage Efficiency Output Remote Remote EZ- Connector
Series Current (A) Range (V) Range (V) (%) Programmable On/Off Sense Sequence Type
Austin MiniLynx 3 A 8.3 – 14 V 0.75 – 5.0 V 91 % Yes Yes No No SIP/SMT
Austin MicroLynx 5 A 10 – 14 V 0.75 – 5.0 V 89 % Yes Yes No No SIP/SMT
Austin Lynx 10 A 10 – 14 V 0.75 – 5.0 V 93 % Yes Yes Yes No SIP/SMT
Austin SuperLynx 16 A 10 – 14 V 0.75 – 5.0 V 92 % Yes Yes Yes No SIP/SMT
Austin Lynx II Output Input Voltage Output Voltage Efficiency Output Remote Remote EZ- Connector
Series Current (A) Range (V) Range (V) (%) Programmable On/Off Sense Sequence Type
Austin MicroLynx II 6 A 8.3 – 14 V 0.75 – 5.0 V 89 % Yes Yes No Yes SIP/SMT
Austin Lynx II 10 A 8.3 – 14 V 0.75 – 5.0 V 93 % Yes Yes Yes Yes SIP/SMT
Austin SuperLynx II 16 A 8.3 – 14 V 0.75 – 5.0 V 92 % Yes Yes Yes Yes SIP/SMT
Austin MegaLynx II 25 A 6.0 – 14 V 0.80 – 3.3 V 92.5 % Yes Yes Yes Yes SIP/SMT
28
Catalog 3-1773445-8 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are U.S. equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Product Compliant to xTCA or AdvancedMC Specifications (Continued)
Solutions for AdvancedTCA, AdvancedTCA 300,
MicroTCA, and AdvancedMC Standards
AdvancedMC, AdvancedTCA,
AdvancedTCA 300, MicroTCA and
PICMG are trademarks of PICMG-PCI
Industrial Computer Manufacturers
Group Incorporated.
Product Compliant to xTCA
or AdvancedMC Specifications
29
Catalog 3-1773445-8 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are U.S. equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Note: This index lists all cataloged parts
by base no. only. Complete part nos. (with
prefixes and/or suffixes) are shown on the
page(s) indicated.
Part Number Index
Solutions for AdvancedTCA, AdvancedTCA 300,
MicroTCA, and AdvancedMC Standards
120943 11
120954 11
120955 11
120956 11
120957 11
120958 11
1339381 23
1367703 13
1469269 15
1469372 15
1469373 15
1469374 15
1469387 15
1469388 15
1469735 12
1469737 12
1469793 12
1469795 12
1469820 16
1469920 18
1469921 19
1469922 19
1469974 12
1469977 12
1489669 22
1489779 22
1658628 22
1658629 22
1658744 22
1658894 22
1761014 22
1761015 22
1761482 23
1766500 5, 6
1766501 5, 6
1766502 6
1766503 6
1888250 21
1888251 21
1888506 20
1888507 20
1888508 20
1888509 20
1888652 20
1888653 20
1888654 20
1888655 20
1888669 24
1888765 14
1888766 14
1934018 12
1934021 12
1934026 12
1934029 12
1934034 12
1934037 12
1934218 12
1934221 12
1934222 12
1934225 12
1934226 12
1934229 12
1981276 25
1981281 25
1981284 25
1981287 25
5120528 26
5120529 26
5120530 26
5120531 26
5120532 26
5120533 26
5120534 26
5223961 11
5223963 11
6367034 22
6367035 22
6469001 7, 8, 10
6469002 7, 9
6469046 9
6469048 10
6469061 8
6469062 9
6469074 9
6469099 9
6469286 8
6469287 9
6469294 8
6469296 9
6469375 10
Part No. Page Part No. Page Part No. Page
91347-1 8
91347-2 8
91347-3 8
91347-4 8
91349-1 9
91349-2 9
91349-3 9
91349-4 9
91378-1 10
91378-3 10
1583220-1 9
1583224-1 8
1583224-2 8
1583224-3 8
1583224-4 8
1583237-1 9
1583248-1 8
1583255-1 9
1804174-1 10
1804177-1 10
Part Number Index (Continued)
Part No. Page Part No. Page Part No. Page
Tooling Part Number Index
30
Catalog 3-1773445-8 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are U.S. equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Tyco Electronics “At Your Service”
Solutions for AdvancedTCA, AdvancedTCA 300,
MicroTCA, and AdvancedMC Standards
AdvancedMC, AdvancedTCA,
AdvancedTCA 300, MicroTCA and
PICMG are trademarks of PICMG-PCI
Industrial Computer Manufacturers
Group Incorporated.
Website
At www.tycoelectronics.com
you’ll find many useful applications and plenty of product information
·Product News —
The latest information on new developments from various Tyco Electronics brands.
·Industries —
Use our industry pages to quickly find the right product for your application.
·Products —
Discover information on our vast array of products ranging from Amplifiers to Wire & Cable.
·Customer Service and Support –
Find contact numbers for Customer Service and Product Information Help Desks plus
FAQs and online technical assistance.
Need more information?
Call Technical Support at
the numbers listed on the
next page.
Technical Support is staffed
with specialists well versed in
all Tyco Electronics products.
They can provide you with:
■Technical Support
■Catalogs
■Technical Documents
■Product Samples
■Tyco Electronics
Authorized Distributor
Locations
Product Websites
www.tycoelectronics.com/products/atca
www.tycoelectronics.com
www.elastomerictech.com
www.power.tycoelectronics.com
www.antenna.tycoelectronics.com
www.hmzd.tycoelectronics.com
www.mpi.tycoelectronics.com
www.thermal.tycoelectronics.com
www.multigigrt.tycoelectronics.com
www.elconproducts.com
www.tycoelectronics.com/fiberoptics
3-1773445-8–2.5M–LUG–FP–6-07 Tyco Electronics Corporation
Printed in the U.S.A. www.tycoelectronics.com
Global Contacts
Americas
Argentina – Buenos Aires
Phone: +54-11-4733-2200
Fax: +54-11-4733-2211
Brasil – São Paulo
Phone: +55-11-3611-1311
Fax: +55-11-3611-0397
Canada – Toronto
Phone: +905-475-6222
Fax: +905-474-5520
Product Information Center:
(Technical Support)
Phone: +905-470-4425
Fax: +905-474-5525
Colombia – Bogota
Phone: +57-1-231-9398
Fax: +57-1-660-0206
Mexico – Mexico City
Phone: +52-55-1106-0800
+01-800-733-8926
Fax: +52-55-1106-0901
United States – Harrisburg, PA
Phone: +717-564-0100
Fax: +717-986-7575
Product Information Center:
(Technical Support)
Phone: +800-522-6752
Fax: +717-986-7575
For Latin/South American
Countries not shown
Phone: +54-11-4733-2015
Fax: +54-11-4733-2083
Asia/Pacific
Australia – Sydney
Phone: +61-2-9554-2600
Fax: +61-2-9502-2556
Product Information Center:
(Technical Support)
Phone: +61-2-9840-8200
Fax: +61-2-9634-6188
India – Bangalore
Phone: +91-80-285-40800
Fax: +91-80-285-40820
Indonesia – Jakarta
Phone: +65-6482-0311
Fax: +65-6482-1012
Japan – Toyko
Phone: +81-44-844-8111
Fax: +81-44-812-3207
Product Information Center:
(Technical Support)
Phone: +81-44-844-8013
Fax: +81-44-812-3200
Korea – Seoul
Phone: +82-2-3415-4500
Fax: +82-2-3486-3810
Malaysia – Kuala Lumpur
Phone: +60-3-78053055
Fax: +60-3-78053066
New Zealand – Auckland
Phone: +64-9-634-4580
Fax: +64-9-634-4586
Philippines – Makati City
Phone: +632-848-0171
Fax: +632-867-8661
People’s Republic of China
Hong Kong
Phone: +852-2735-1628
Fax: +852-2735-0243
Shanghai
Phone: +86-21-2407-1588
Fax: +86-21-2407-1599
Taiwan – Taipei
Phone: +886-2-8768-2788
Fax: +886-2-8768-2268
Singapore – Singapore
Phone: +65-6482-0311
Fax: +65-6482-1012
Thailand – Bangkok
Phone: +66-2-955-0500
Fax: +66-2-955-0505
Vietnam and Indochina –
Ho Chi Minh City
Phone: +84-8 930-5546
Fax: +84-8 930-3443
Europe/Middle East/Africa
Austria – Vienna
Phone: +43-1 90 5 60-0
Fax: +43-1 90 5 60-1333
Belgium – Kessel-Lo
Phone: +32-16-35-23-00
Fax: +32-16-35-23-52
Bulgaria – Sofia
Phone: +359-2-971-2152
Fax: +359-2-971-2153
Czech Republic – Kurim
Phone: +420-5-41-162-111
Fax: +420-5-41-162-223
Denmark – Glostrup
Phone: +45-43-480-452
Fax: +45-43-441-414
Egypt – Cairo
Phone: +20-2-29 04 281
Fax: +20-2-41 92 334
Estonia – Tartu
Phone: +372-5138-274
Fax: +372-7400-779
Finland – Helsinki
Phone: +358-95-12-34-20
Fax: +358-95-12-34-250
France – Cergy-Pontoise
Phone: +33-1-3420-8888
Fax: +33-1-3420-8600
Product Information Center:
(Technical Support)
Phone: +33-1-3420-8943
Fax: +33-1-3420-8623
Germany – Bensheim
Phone: +49-6251-133-0
Fax: +49-6251-133-1600
Product Information Center:
(Technical Support)
Phone: +49-6251-133-1999
Fax: +49-6251-133-1988
Germany – Langen
Phone: +49-6103-709-0
Fax: +49-6103-709-1223
Germany – Speyer
Phone: +49-6232-30-0
Fax: +49-6232-30-2243
Germany - HTS Division – Neunkirchen
Phone: +49-2247-305-0
Fax: +49-2247-305-122
Greece – Athens
Phone: +30-210-9370-396/397
Fax: +30-210-9370-655
Hungary – Budapest
Phone: +36-1-289-1000
Fax: +36-1-289-1010
Ireland – Dublin
Phone: +353-1-820-3000
Fax: +353-1-820-9790
Israel – Yokneam
Phone: +972-4-959-0508
Fax: +972-4-959-0506
Italy – Collegno (Torino)
Phone: +39-011-4012-111
Fax: +39-011-4031116
Lithuania – Vilnius
Phone: +370-5-2131-402
Fax: +370-5-2131-403
Netherlands – ’s-Hertogenbosch
Phone: +31-73-624-62-46
Fax: +31-73-621-23-65
Product Information Center:
(Technical Support)
Phone: +31-73-6246-999
Fax: +31-73-6246-998
Norway – Nesbru
Phone: +47-66-77-8886
Fax: +47-66-77-8855
Poland – Warsaw
Phone: +48-22-45-76-700
Fax: +48-22-45-76-720
Romania – Bucharest
Phone: +40-21-311-3479/3596
Fax: +40-21-312-0574
Russia – Moscow
Phone: +7-495-926-5506/07/08/09
Fax: +7-495-926-5505
Russia – St. Petersburg
Phone: +7-812-718-8192
Fax: +7-812-718-8193
Slovenia – Ljubljana
Phone: +386-1561-3270
Fax: +386-1561-3240
South Africa – Port Elizabeth
Phone: +2741-503-4500
Fax: +2741-581-0440
Spain – Barcelona
Phone: +34-93-291-0330
Fax: +34-93-201-7879
Product Information Center:
(Technical Support):
Phone: +34-93-291-0330
Fax: +34-93-200-3779
Sweden – Upplands Väsby
Phone: +46-8-50-72-50-00
Fax: +46-8-50-72-50-01
Switzerland – Steinach
Phone: +41-71-447-0447
Fax: +41-71-447-0444
Turkey – Istanbul
Phone: +90-212-281-8181/2/3
Fax: +90-212-281-8184
Ukraine – Kiev
Phone: +380-044-206-2265
Fax: +380-044-206-2264
United Kingdom – Swindon
Phone: +44-8706-080-208
Fax: +44-1793-572-516
Product Information Center:
(Technical Support)
Freephone GB: 0800-267-666
Phone: +44-8706-080-208
Fax: +44-208-420-8081
For Middle East/African Countries
Not Shown
Phone: +33-1-3420-8866
Fax: +33-1-3420-8300
Tyco Electronics Corporation
Harrisburg, PA
tycoelectronics.com
3-1773445-8–2.5M–LUG–FP–6-07
RoHS
Ready
Solutions for AdvancedTCA,
AdvancedTCA 300, MicroTCA,
and AdvancedMC Standards
