NP Series Preferred Devices Thyristor Surge Protectors High Voltage Bidirectional NP Series Thyristor Surge Protector Devices (TSPD) protect telecommunication circuits such as central office, access, and customer premises equipment from overvoltage conditions. These are bidirectional devices so they are able to have functionality of 2 devices in one package, saving valuable space on board layout. These devices will act as a crowbar when overvoltage occurs and will divert the energy away from circuit or device that is being protected. Use of the NP Series in equipment will help meet various regulatory requirements including: GR-1089-CORE, IEC 61000-4-5, ITU K.20/21/45, IEC 60950, TIA-968-A, FCC Part 68, EN 60950, UL 1950. ELECTRICAL PARAMETERS BIDIRECTIONAL SURFACE MOUNT THYRISTOR 64 - 350 VOLTS MT1 VDRM V(BO) VT IDRM I(BO) IT IH Device V V V mA mA A mA NP0640SxT3G 58 77 4 5 800 2.2 150 NP0720SxT3G 65 88 4 5 800 2.2 150 NP0900SxT3G 75 98 4 5 800 2.2 150 NP1100SxT3G 90 130 4 5 800 2.2 150 NP1300SxT3G 120 160 4 5 800 2.2 150 NP1500SxT3G 140 180 4 5 800 2.2 150 NP1800SxT3G 170 220 4 5 800 2.2 150 NP2100SxT3G 180 240 4 5 800 2.2 150 NP2300SxT3G 190 260 4 5 800 2.2 150 NP2600SxT3G 220 300 4 5 800 2.2 150 NP3100SxT3G 275 350 4 5 800 2.2 150 NP3500SxT3G 320 400 4 5 800 2.2 150 G = indicates leadfree, RoHS compliant SURGE DATA RATINGS Waveform * http://onsemi.com x = series ratings Specification Current ms A B C Unit GR-1089-CORE 2x10 2x10 150 250 500 A(pk) TIA-968-A 10x160 10x160 90 150 200 GR-1089-CORE 10x360 10x360 75 125 175 TIA-968-A 10x560 10x560 50 100 150 10x700 5x310 75 100 200 GR-1089-CORE 10x1000 10x1000 50 80 100 SMB JEDEC DO-214AA CASE 403C MARKING DIAGRAM AYWW xxxxG G xxxx = Specific Device Code Y = Year WW = Work Week G = Pb-Free Package (Note: Microdot may be in either location) ORDERING INFORMATION Voltage ms ITU-T K.20/21 MT2 See detailed ordering and shipping information on page 4 of this data sheet. Preferred devices are recommended choices for future use and best overall value. Recognized Components (c) Semiconductor Components Industries, LLC, 2008 May, 2008 - Rev. 5 1 Publication Order Number: NP0640S/D NP Series ELECTRICAL CHARACTERISTICS (TA = 25C unless otherwise noted) Characteristics (Note 1) Breakover Voltage (Both Polarities) Min Typ V(BO) NP0640SxT3G NP0720SxT3G NP0900SxT3G NP1100SxT3G NP1300SxT3G NP1500SxT3G NP1800SxT3G NP2100SxT3G NP2300SxT3G NP2600SxT3G NP3100SxT3G NP3500SxT3G Off-State Voltage (Both Polarities) Off State Current Symbol VDRM NP0640SxT3G NP0720SxT3G NP0900SxT3G NP1100SxT3G NP1300SxT3G NP1500SxT3G NP1800SxT3G NP2100SxT3G NP2300SxT3G NP2600SxT3G NP3100SxT3G NP3500SxT3G ( VD1 = 50 V ) Both Polarities ( VD2 = VDRM ) Both Polarities Max 77 88 98 130 160 180 220 240 260 300 350 400 Unit V V 58 65 75 90 120 140 170 180 190 220 275 320 IDRM1 IDRM2 2.0 5.0 mA mA Holding Current (Both Polarities) (Note 4) VS = 500 V; IT = 2.2 A IH 150 250 - mA On-State Voltage IT = 1.0 A(pk) (PW = 300 mSec, DC = 2%) VT - - 4.0 V Maximum Non-Repetitive Rate of Change of On-State Current (Note 1) (Haefely test method, 1.0 pk < 100 A) di/dt - - 500 A/mSec Critical Rate of Rise of Off-State Voltage (Linear Waveform, VD = 0.8 VDRM, TJ = 25C) dv/dt 5.0 - - kV/mSec Unit CAPACITANCE Typ Characteristics (f=1.0 MHz, 1.0 Vrms, 2 Vdc bias) 1. 2. 3. 4. Symbol NP0640SxT3G NP0720SxT3G NP0900SxT3G NP1100SxT3G NP1300SxT3G NP1500SxT3G NP1800SxT3G NP2100SxT3G NP2300SxT3G NP2600SxT3G NP3100SxT3G NP3500SxT3G Electrical parameters are based on pulsed test methods. di/dt must not be exceeded of a maximum of 100 A/mSec in this application. Measured under pulsed conditions to reduce heating Allow cooling before testing second polarity. http://onsemi.com 2 Co A B C 84 79 65 58 46 44 39 37 36 33 31 28 129 123 122 95 75 70 59 59 56 52 47 44 222 198 122 154 120 113 99 97 56 81 76 71 pF NP Series SURGE RATINGS Characteristics Symbol Nominal Pulse Surge Short Circuit Current Non - Repetitive Double Exponential Decay Waveform (Notes 5, 6 and 7) 2 x 10 mSec 10 x 160 mSec 10 x 360 mSec 10 x 560 mSec 10 x 700 mSec 10 x 1000 mSec A B C Unit A(pk) IPPS1 IPPS3 IPPS4 IPPS5 IPPS6 IPPS7 150 90 75 50 75 50 250 150 125 100 100 80 500 200 150 150 200 100 5. Allow cooling before testing second polarity. 6. Measured under pulse conditions to reduce heating. 7. Nominal values may not represent the maximum capability of a device. THERMAL CHARACTERISTICS Symbol TSTG TJ R0JA Rating Value Unit Storage Temperature Range -65 to +150 C Operating Temperature Range -40 to +150 C 90 C/W Thermal Resistance: Junction-to-Ambient Per EIA/JESD51-3, PCB = FR4 3"x4.5"x0.06" Fan out in a 3x3 inch pattern, 2 oz copper track. Ipp - PEAK PULSE CURRENT - %Ipp +I Peak Value 100 I(BO) IH -Voltage Half Value 50 0 IT tr = rise time to peak value tf = decay time to half value +Voltage VT 0 tr VDRM V(BO) tf TIME (ms) -I Figure 2. Voltage Current Characteristics of TSPD Figure 1. Exponential Decay Pulse Waveform Symbol Parameter VDRM Peak Off State Voltage V(BO) Breakover Voltage I(BO) Breakover Current IH Holding Current VT On State Voltage IT On State Current http://onsemi.com 3 NP Series ORDERING INFORMATION Part Number Case Shipping SMB (Pb-Free) 2500 / Tape and Reel Marking NP0640SAT3G 064A NP0640SBT3G 064B NP0640SCT3G 064C NP0720SAT3G 072A NP0720SBT3G 072B NP0720SCT3G 072C NP0900SAT3G 090A NP0900SBT3G 090B NP0900SCT3G 090C NP1100SAT3G 110A NP1100SBT3G 110B NP1100SCT3G 110C NP1300SAT3G 130A NP1300SBT3G 130B NP1300SCT3G 130C NP1500SAT3G 150A NP1500SBT3G 150B NP1500SCT3G 150C NP1800SAT3G 180A NP1800SBT3G 180B NP1800SCT3G 180C NP2100SAT3G 210A NP2100SBT3G 210B NP2100SCT3G 210C NP2300SAT3G 230A NP2300SBT3G 230B NP2300SCT3G 230C NP2600SAT3G 260A NP2600SBT3G 260B NP2600SCT3G 260C NP3100SAT3G 310A NP3100SBT3G 310B NP3100SCT3G 310C NP3500SAT3G 350A NP3500SBT3G 350B NP3500SCT3G 350C For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. http://onsemi.com 4 NP Series PACKAGE DIMENSIONS SMB CASE 403C-01 ISSUE A S NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. D DIMENSION SHALL BE MEASURED WITHIN DIMENSION P. A D INCHES DIM MIN MAX A 0.160 0.180 B 0.130 0.150 C 0.075 0.095 D 0.077 0.083 H 0.0020 0.0060 J 0.006 0.012 K 0.030 0.050 P 0.020 REF S 0.205 0.220 B C K J P MILLIMETERS MIN MAX 4.06 4.57 3.30 3.81 1.90 2.41 1.96 2.11 0.051 0.152 0.15 0.30 0.76 1.27 0.51 REF 5.21 5.59 H SOLDERING FOOTPRINT* 2.261 0.089 2.743 0.108 2.159 0.085 SCALE 8:1 mm inches *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5773-3850 http://onsemi.com 5 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative NP0640S/D