Composite Transistors UP04979 Silicon N-channel MOSFET (Tr1) Silicon P-channel MOSFET (Tr2) 0.20+0.05 -0.02 (0.30) 4 1.200.05 For switching Display at No.1 lead * 2SJ0672 + 2SK3539 Parameter Tr1 Symbol Rating Unit VDSS 50 V Marking Symbol: 4T Gate-source voltage (Drain open) VGSO 7 V Internal Connection ID 100 mA Peak drain current Overall 4: Source (FET2) 5: Gate (FET2) 6: Drain (FET1) SSMini6-F1 Package Drain-source surrender voltage Drain current Tr2 1: Source (FET1) 2: Gate (FET1) 3: Drain (FET2) JEDEC: SOD-723 IDP 200 mA Drain-source surrender voltage VDSS -30 V Gate-source voltage (Drain open) VGSO 7 V Drain current ID -100 mA Peak drain current IDP -200 mA Total power dissipation * PT 125 mW Junction temperature Tch 125 C Storage temperature Tstg -55 to +125 C (D1) (G2) 6 5 1 (S1) 0.10 max. 5 Basic Part Number Absolute Maximum Ratings Ta = 25C 5 0.550.05 * High-speed switching * Gate protection diode built-in * Two elements incorporated into one package (Each transistor is separated) * Reduction of the mounting area and assembly cost by one half 2 3 (0.50)(0.50) 1.000.05 1.600.05 (0.20) 1 0 to 0.02 Features (0.20) 5 1.600.05 6 Unit: mm 0.100.02 (S2) 4 2 3 (G1) (D2) Note) *: Measuring on substrate at 17 mm x 10 mm x 1 mm Publication date: August 2004 SJJ00303AED 1 UP04979 Electrical Characteristics Ta = 25C 3C * Tr1 Parameter Symbol Conditions Min Typ Max Unit VDSS ID = 10 A, VGS = 0 Drain-source cutoff current IDSS VDS = 30 V, VGS = 0 1.0 A Gate-source cutoff current IGSS VGS = 7 V, VDS = 0 10 A Drain-source surrender voltage 50 Vth ID = 1.0 A, VDS = 3.0 V Drain-source ON resistance RDS(on) ID = 10 mA, VGS = 2.5 V Forward transfer admittance Yfs Gate threshold voltage 0.5 V 1.0 1.5 V 8 15 6 12 ID = 10 mA, VGS = 4.0 V ID = 10 mA, VDS = 3.0 V 20 60 mS * ton VDD = 3 V, VGS = 0 V to 3 V, ID = 10 mA 200 ns Turn-off time * toff VDD = 3 V, VGS = 3 V to 0 V, ID = 10 mA 200 ns Turn-on time Note) 1. Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7030 measuring methods for transistors. 2. *: Refer to ton, toff test circuit. * Tr2 Parameter Symbol Conditions Drain-source surrender voltage VDSS ID = -10 A, VGS = 0 Drain-source cutoff current IDSS VDS = -20 V, VGS = 0 Gate-source cutoff current IGSS VGS = 7 V, VDS = 0 Gate threshold voltage Vth ID = -1.0 A, VDS = -3.0 V RDS(on) Drain-source ON resistance Forward transfer admittance Yfs Min Typ Max Unit -1.0 A -30 V 10 A -1.0 -1.5 V ID = -10 mA, VGS = -2.5 V 25 45 ID = -10 mA, VGS = -4.0 V 15 30 - 0.5 ID = -10 mA, VDS = -3.0 V 35 mS Turn-on time * ton VDD = -3 V, VGS = 0 V to -3 V, ID = -10 mA 850 ns * toff VDD = -3 V, VGS = -3 V to 0 V, ID = -10 mA 850 ns Turn-off time 20 Note) 1. Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7030 measuring methods for transistors. 2. *: Refer to ton, toff test circuit. ton, toff test citcuit (Tr1) VOUT 100 F VGS = 3.0 V 470 50 90% 10% VIN VDD = 3 V VOUT 10% 90% ton ton, toff test citcuit (Tr2) VOUT 280 10% 50 100 F VGS VGS = 0 V to -3 V 90% VDD = -3 V 90% VOUT 10% ton 2 toff SJJ00303AED toff UP04979 Common characteristics chart PT Ta Total power dissipation PT (mW) 140 120 100 80 60 40 20 0 0 40 80 120 Ambient temperature Ta (C) Characteristics charts of Tr1 ID VDS ID VGS 60 VGS = 2.0 V 50 1.9 V 40 1.8 V 30 1.7 V 20 0 Ta = -25C 250 25C 200 85C 150 100 1.6 V 50 10 1.5 V 0 0 2 4 6 8 10 12 1 Yfs VGS 140 120 100 80 60 40 20 3 4 5 6 0 50 100 150 200 250 Drain current ID (mA) RDS(on) VGS 40 VDS = 3 V 160 Drain-source ON resistance RDS(on) () Forward transfer admittance |Yfs | (mS) 2 Gate-source voltage VGS (V) 180 140 120 100 80 60 40 20 0 160 0 0 Drain-source voltage VDS (V) 0 VGS = 3 V Ta = 25C VDS = 3 V Forward transfer admittance |Yfs | (mS) Ta = 25C Yfs ID 180 300 Drain current ID (mA) Drain current ID (mA) 70 1 2 3 Gate-source voltage VGS (V) ID = 10 mA 30 20 Ta = 85C 10 25C -25C 0 0 2 4 6 8 10 12 Gate-source voltage VGS (V) SJJ00303AED 3 UP04979 Characteristics charts of Tr2 ID VDS ID VGS Drain current ID (mA) 85C -100 -2.75 V -2.50 V -40 -80 -60 -40 -20 0 25C -120 -3.00 V -60 Ta = -25C -140 -3.25 V -80 VDS = -3 V -160 -20 0 -2 -4 -6 -8 -10 -12 Drain-source voltage VDS (V) 0 -2 -4 Gate-source voltage VGS (V) Drain-source ON resistance RDS(on) () ID = -10 mA 40 30 Ta = 85C 20 25C 10 -25C 0 0 -2 -4 -6 Gate-source voltage VGS (V) 4 -6 SJJ00303AED VDS = -3 V Ta = 25C 60 50 40 30 20 10 0 0 RDS(on) VGS 50 Forward transfer admittance |Yfs | (mS) Ta = 25C VGS = -3.50 V -100 Yfs VGS 70 -180 Drain current ID (mA) -120 0 -2 -4 -6 Gate-source voltage VGS (V) Request for your special attention and precautions in using the technical information and semiconductors described in this material (1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technical information described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuits examples of the products. It neither warrants non-infringement of intellectual property right or any other rights owned by our company or a third party, nor grants any license. (3) We are not liable for the infringement of rights owned by a third party arising out of the use of the technical information as described in this material. (4) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: * Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. * Any applications other than the standard applications intended. (5) The products and product specifications described in this material are subject to change without notice for modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (6) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage, and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products. (7) When using products for which damp-proof packing is required, observe the conditions (including shelf life and amount of time let standing of unsealed items) agreed upon when specification sheets are individually exchanged. (8) This material may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita Electric Industrial Co., Ltd. 2003 SEP