Tab is
VOUT
INPUT
OUTPUT
ADJ/GND
VOUT INPUT
OUTPUT
ADJ/GND
LMS1585A/87-3.3VIN 4.75V 3.3V
3A, 5A
+ + C2*
10 µF
C1
10 µF
* Required for Stability
LMS1585A , LMS1587
www.ti.com
SNVS061G MONTH 2003REVISED JULY 2013
LMS1585A 5A/LMS1587 5A and 3A Low Dropout Fast Response Regulators
Check for Samples: LMS1585A ,LMS1587
1FEATURES DESCRIPTION
The LMS1585A and LMS1587 are low dropout
234 Fast Transient Response positive regulators with output load current of 5A and
Available in Adjustable, 1.5V, and 3.3V 3A respectively. Their low dropout voltage (1.2V) and
versions fast transient response make them an excellent
Current Limiting and Thermal Protection solution for low voltage microprocessor applications.
Commercial Temp. Tange: 0°C to 125°C The LMS1585A/87 are available in adjustable
versions, which can set the output voltage with only
Industrial Temp. Range: 40°C to 125°C two external resistors. In addition, they are also
Line Regulation 0.005% (typical) available in 1.5V and 3.3V fixed voltage versions(1).
Load Regulation 0.05% (typical) The LMS1585A/87 circuits include a zener trimmed
Direct Replacement for LT®1585A/87 bandgap reference, current limiting and thermal
shutdown. The LMS1585A/87 series are available in
APPLICATIONS KTT (TO-263) and NDE (TO-220) packages.
Pentium®processor supplies
PowerPC®supplies
Other microprocessor supplies
Low voltage logic supplies (1) Consult factory for other fixed voltage options.
Typical Application
Figure 1. NDE (TO-220) Figure 2. KTT (TO-263)
(Top View) (Top View)
1Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2PowerPC is a registered trademark of IBM.
3Pentium is a registered trademark of Intel Corporation.
4LT is a registered trademark of Linear Technology.
PRODUCTION DATA information is current as of publication date. Copyright © 2003–2013, Texas Instruments Incorporated
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Thermal
Limit
VIN
VOUT
Substrate
GND (Fixed Output)
tADJ. (Adjustable Output)ttt
LMS1585A , LMS1587
SNVS061G MONTH 2003REVISED JULY 2013
www.ti.com
Table 1. LMS1585A/LMS1587 Device Options
Operating
Part Number Output Voltage Package Drawing Package Type Output Current
Temperature
LMS1585AIS-1.5 1.5V -40°C to 125°C
LMS1585AIS-3.3 3.3V
LMS1585ACS-ADJ Adjustable KTT TO-263 5A
LMS1585ACS-1.5 1.5V
LMS1585ACS-3.3 3.3V 0°C to 125°C
LMS1585ACT-1.5 1.5V NDE TO-220 5A
LMS1585ACT-3.3 3.3V
LMS1587IS-ADJ Adjustable
LMS1587IS-1.5 1.5V –40°C to 125°C
LMS1587IS-3.3 3.3V KTT TO-263
LMS1587CS-ADJ Adjustable
LMS1587CS-3.3 3.3V 0°C to 125°C 3A
LMS1587CS-1.5 1.5V
LMS1587IT-1.5 1.5V –40°C to 125C
LMS1587CT-ADJ Adjustable NDE TO-220
0°C to 125°C
LMS1587CT-3.3 3.3V
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
2Submit Documentation Feedback Copyright © 2003–2013, Texas Instruments Incorporated
Product Folder Links: LMS1585A LMS1587
LMS1585A , LMS1587
www.ti.com
SNVS061G MONTH 2003REVISED JULY 2013
ABSOLUTE MAXIMUM RATINGS(1)(2)
Maximum Input to Output Voltage (VIN to GND) 13V
Power Dissipation(3) Internally Limited
Junction Temperature (TJ)(3) 150˚C
Storage Temperature Range -65˚C to 150˚C
Lead Temperature 260˚C, 10 sec
ESD Tolerance(4) 2000V
(1) Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for
which the device is intended to be functional, but specific performance is not ensured. For ensured specifications and the test
conditions, see the Electrical Characteristics.
(2) If Military/Aerospace specified devices are required, please contact the TI Sales Office/ Distributors for availability and specifications.
(3) The maximum power dissipation is a function of TJ(max) ,θJA, and TA. The maximum allowable power dissipation at any ambient
temperature is PD= (TJ(max)–T A)/θJA. All numbers apply for packages soldered directly into a PC board.
(4) For testing purposes, ESD was applied using human body model, 1.5 kin series with 100 pF.
Copyright © 2003–2013, Texas Instruments Incorporated Submit Documentation Feedback 3
Product Folder Links: LMS1585A LMS1587
LMS1585A , LMS1587
SNVS061G MONTH 2003REVISED JULY 2013
www.ti.com
ELECTRICAL CHARACTERISTICS
Typicals and limits appearing in normal type apply for TJ= 25˚C. Limits appearing in Boldface type apply over the entire
junction temperature range for operation, 0˚C to 125˚C for commercial grade and 40˚C to 125˚C for industrial grade.
Symbol Parameter Conditions Min(1) Typ(2) Max(1) Units
VREF Reference Voltage LMS1585A-ADJ
VINVOUT = 3V, IOUT = 10mA 1.238 1.250 1.262 V
10mA IOUT 5A, 1.5V VINVOUT 5.75V 1.225 1.250 1.275 V
LMS1587-ADJ
10mA IOUT 3A, 1.5V VINVOUT 5.75V 1.225 1.250 1.275 V
VOUT Output Voltage LMS1585A-1.5
IOUT = 0mA, VIN = 5V 1.485 1.500 1.515 V
0IOUT 5A, 3V VIN 7V 1.470 1.530 V
LMS1585A-3.3
IOUT = 0mA, V IN = 5V 3.267 3.300 3.333 V
0IOUT 5A, 4.75V VIN 7V 3.235 3.300 3.365 V
LMS1587-1.5
VIN = 5V, I OUT = 0mA, TJ = 25˚C 1.485 1.500 1.515 V
0IOUT 3A, 3V VIN 7V 1.470 1.500 1.530 V
LMS1587-3.3
0IOUT 3A, 4.75V VIN 7V 3.235 3.300 3.365 V
VOUT Line Regulation(3) LMS1585A/87-ADJ
IOUT = 10mA, 2.75V VIN 7V 0.005 0.2 %
LMS1585A/87-3.3
IOUT = 0mA, 4.75V VIN 7V 0.005 0.2 %
LMS1585A/87-1.5
IOUT = 0mA, 3V VIN 7V 0.005 0.2 %
VOUT Load Regulation(3) LMS1585A-ADJ 0.3 %
VINVOUT = 3V, 10mA IOUT 5A 0.05 0.5
LMS1585A-1.5/LMS1585A-3.3 0.05 0.3 %
VIN = 5V, 0 IOUT 5A 0.05 0.5
LMS1587-ADJ 0.05 0.3
VINVOUT = 3V, 10mA IOUT 3A 0.05 0.5 %
LMS1587-1.5/LMS1587-3.3 0.05 0.3 %
VIN = 5V, 0 IOUT 3A 0.05 0.5 %
VINVOUT Dropout Voltage LMS1585A-ADJ/LMS1587-ADJ
VREF = 1%, IOUT = 3A 1.15 1.3 V
LMS1585A-3.3/LMS1587-3.3/
LMS1585A-1.5/LMS1587-1.5
VOUT = 1%, IOUT = 3A 1.15 1.3 V
LMS1585A-ADJ
VREF = 1%, IOUT = 5A 1.2 1.4 V
LMS1585A-1.5/LMS1585A-3.3
VOUT = 1%, IOUT = 5A 1.2 1.4 V
(1) All limits are specified by testing or statistical analysis.
(2) Typical Values represent the most likely parametric norm.
(3) Load and line regulation are measured at constant junction temperature, and are ensured up to the maximum power dissipation of 30W.
Power dissipation is determined by the input/output differential and the output current. Ensured maximum power dissipation will not be
available over the full input/output range.
4Submit Documentation Feedback Copyright © 2003–2013, Texas Instruments Incorporated
Product Folder Links: LMS1585A LMS1587
LMS1585A , LMS1587
www.ti.com
SNVS061G MONTH 2003REVISED JULY 2013
ELECTRICAL CHARACTERISTICS (continued)
Typicals and limits appearing in normal type apply for TJ= 25˚C. Limits appearing in Boldface type apply over the entire
junction temperature range for operation, 0˚C to 125˚C for commercial grade and 40˚C to 125˚C for industrial grade.
ILIMIT Current Limit LMS1585A-ADJ/LMS1585A-3.3/LMS1585A-1.5
VINVOUT = 5.5V 5.0 6.6 A
LMS1587-ADJ/LMS1587-3.3/LMS1587-1.5
VINVOUT = 5.5V 3.1 4.3 A
Minimum Load LMS1585A/87-ADJ
Current (4) 1.5V VINVOUT 5.75V 2.0 10.0 mA
Quiescent Current LMS1585A-3.3/LMS1587-3.3/
LMS1585A-1.5/LMS1587-1.5
VIN = 5V 7.0 13.0 mA
Thermal Regulation TA = 25˚C, 30ms Pulse 0.003 %/W
Ripple Rejection LMS1585A-ADJ
fRIPPLE = 120Hz, VINVOUT = 3V,
IOUT = 5A, COUT = 25µF Tantalum 72 dB
LMS1585A-1.5
fRIPPLE = 120Hz, COUT = 25µF
Tantalum, IOUT = 5A, VIN = 4.5V 60 72 dB
LMS1585A-3.3
fRIPPLE = 120Hz, COUT = 25µF
Tantalum, IOUT = 5A, VIN = 6.3V 72 dB
LMS1587-ADJ
fRIPPLE = 120 Hz, VINVOUT = 3V, IOUT = 3A
COUT = 25 µF Tantalum 72 dB
LMS1587-1.5
fRIPPLE = 120 Hz, COUT = 25µF Tantalum,
IOUT = 3A, VIN = 4.5V 60 72 dB
LMS1587-3.3
fRIPPLE = 120 Hz, COUT = 25µF Tantalum,
IOUT = 3A, VIN = 6.3V 72 dB
Adjust Pin Current 55 120 µA
Adjust Pin Current 10mA IOUT IFULLLOAD,
1.5V VINVOUT 5.75V(5) 0.2 µA
Temperature Stability 0.5 %
Long Term Stability TA = 125˚C, 1000Hrs 0.03 %
RMS Output Noise 10Hz f10kHz 0.003 %
(% of VOUT)
Thermal Resistance 3-Lead KTT (TO-263): Control/Output Section 0.65/2.7 *C/W
Junction-to-Case 3-Lead NDE (TO-220): Control/Output Section 0.65/2.7 *C/W
(4) The minimum output current required to maintain regulation.
(5) IFULLLOAD is 5A for LMS1585A and 3A for LMS1587.
Copyright © 2003–2013, Texas Instruments Incorporated Submit Documentation Feedback 5
Product Folder Links: LMS1585A LMS1587
VOUT
VIN
I1
10 µF
VREF
10 µF
R1
R2
IADJ
VIN VOUT
ADJ
VOUT = VREF (1 + R2) + IADJR2
R2
R1
LMS1585A , LMS1587
SNVS061G MONTH 2003REVISED JULY 2013
www.ti.com
APPLICATION NOTE
OUTPUT VOLTAGE
The adjustable version develops at 1.25V reference voltage, (VREF), between the output and the adjust terminal.
As shown in Figure 3, this voltage is applied across resistor R1 to generate a constant current I1. This constant
current then flows through R2. The resulting voltage drop across R2 adds to the reference voltage to sets the
desired output voltage.
The current IADJ from the adjustment terminal introduces an output error. But since it is small (120μA max), it
becomes negligible when R1 is in the 100Ωrange.
For fixed voltage devices, R1 and R2 are integrated inside the devices.
Figure 3. Basic Adjustable Regulator
6Submit Documentation Feedback Copyright © 2003–2013, Texas Instruments Incorporated
Product Folder Links: LMS1585A LMS1587
PACKAGE OPTION ADDENDUM
www.ti.com 14-Oct-2017
Addendum-Page 1
PACKAGING INFORMATION
Orderable Device Status
(1)
Package Type Package
Drawing Pins Package
Qty Eco Plan
(2)
Lead/Ball Finish
(6)
MSL Peak Temp
(3)
Op Temp (°C) Device Marking
(4/5)
Samples
LMS1585ACS-1.5 NRND DDPAK/
TO-263 KTT 3 45 TBD Call TI Call TI 0 to 125 LMS1585
ACS-1.5
LMS1585ACS-1.5/NOPB ACTIVE DDPAK/
TO-263 KTT 3 45 Pb-Free (RoHS
Exempt) CU SN Level-3-245C-168 HR 0 to 125 LMS1585
ACS-1.5
LMS1585ACS-3.3 NRND DDPAK/
TO-263 KTT 3 45 TBD Call TI Call TI 0 to 125 LMS1585
ACS-3.3
LMS1585ACS-3.3/NOPB ACTIVE DDPAK/
TO-263 KTT 3 45 Pb-Free (RoHS
Exempt) CU SN Level-3-245C-168 HR 0 to 125 LMS1585
ACS-3.3
LMS1585ACSX-1.5/NOPB ACTIVE DDPAK/
TO-263 KTT 3 500 Pb-Free (RoHS
Exempt) CU SN Level-3-245C-168 HR 0 to 125 LMS1585
ACS-1.5
LMS1585ACSX-3.3/NOPB ACTIVE DDPAK/
TO-263 KTT 3 500 Pb-Free (RoHS
Exempt) CU SN Level-3-245C-168 HR 0 to 125 LMS1585
ACS-3.3
LMS1585ACSX-ADJ/NOPB ACTIVE DDPAK/
TO-263 KTT 3 500 Pb-Free (RoHS
Exempt) CU SN Level-3-245C-168 HR 0 to 125 LMS1585
ACS-ADJ
LMS1585ACT-1.5/NOPB ACTIVE TO-220 NDE 3 45 Green (RoHS
& no Sb/Br) CU SN Level-1-NA-UNLIM 0 to 125 LMS1585ACT
1.5
LMS1585ACT-3.3/NOPB ACTIVE TO-220 NDE 3 45 Green (RoHS
& no Sb/Br) CU SN Level-1-NA-UNLIM 0 to 125 LMS1585
ACT-3.3
LMS1585AIS-1.5 NRND DDPAK/
TO-263 KTT 3 45 TBD Call TI Call TI -40 to 125 LMS1585
AIS-1.5
LMS1585AIS-1.5/NOPB ACTIVE DDPAK/
TO-263 KTT 3 45 Pb-Free (RoHS
Exempt) CU SN Level-3-245C-168 HR -40 to 125 LMS1585
AIS-1.5
LMS1585AIS-3.3/NOPB ACTIVE DDPAK/
TO-263 KTT 3 45 Pb-Free (RoHS
Exempt) CU SN Level-3-245C-168 HR -40 to 125 LMS1585
AIS-3.3
LMS1585AISX-3.3/NO ACTIVE DDPAK/
TO-263 KTT 3 500 Pb-Free (RoHS
Exempt) CU SN Level-3-245C-168 HR -40 to 125 LMS1585
AIS-3.3
LMS1587CS-1.5/NOPB ACTIVE DDPAK/
TO-263 KTT 3 45 Pb-Free (RoHS
Exempt) CU SN Level-3-245C-168 HR 0 to 125 LMS1587
CS-1.5
LMS1587CS-3.3 NRND DDPAK/
TO-263 KTT 3 45 TBD Call TI Call TI 0 to 125 LMS1587
CS-3.3
LMS1587CS-3.3/NOPB ACTIVE DDPAK/
TO-263 KTT 3 45 Pb-Free (RoHS
Exempt) CU SN Level-3-245C-168 HR 0 to 125 LMS1587
CS-3.3
LMS1587CS-ADJ NRND DDPAK/
TO-263 KTT 3 45 TBD Call TI Call TI 0 to 125 LMS1587
CS-ADJ
PACKAGE OPTION ADDENDUM
www.ti.com 14-Oct-2017
Addendum-Page 2
Orderable Device Status
(1)
Package Type Package
Drawing Pins Package
Qty Eco Plan
(2)
Lead/Ball Finish
(6)
MSL Peak Temp
(3)
Op Temp (°C) Device Marking
(4/5)
Samples
LMS1587CS-ADJ/NOPB ACTIVE DDPAK/
TO-263 KTT 3 45 Pb-Free (RoHS
Exempt) CU SN Level-3-245C-168 HR 0 to 125 LMS1587
CS-ADJ
LMS1587CSX-1.5/NOPB ACTIVE DDPAK/
TO-263 KTT 3 500 Pb-Free (RoHS
Exempt) CU SN Level-3-245C-168 HR 0 to 125 LMS1587
CS-1.5
LMS1587CSX-3.3 NRND DDPAK/
TO-263 KTT 3 500 TBD Call TI Call TI 0 to 125 LMS1587
CS-3.3
LMS1587CSX-3.3/NOPB ACTIVE DDPAK/
TO-263 KTT 3 500 Pb-Free (RoHS
Exempt) CU SN Level-3-245C-168 HR 0 to 125 LMS1587
CS-3.3
LMS1587CSX-ADJ/NOPB ACTIVE DDPAK/
TO-263 KTT 3 500 Pb-Free (RoHS
Exempt) CU SN Level-3-245C-168 HR 0 to 125 LMS1587
CS-ADJ
LMS1587CT-3.3 NRND TO-220 NDE 3 45 TBD Call TI Call TI 0 to 125 LMS1587
CT-3.3
LMS1587CT-3.3/NOPB ACTIVE TO-220 NDE 3 45 Green (RoHS
& no Sb/Br) CU SN Level-1-NA-UNLIM 0 to 125 LMS1587
CT-3.3
LMS1587CT-ADJ NRND TO-220 NDE 3 45 TBD Call TI Call TI 0 to 125 LMS1587
CT-ADJ
LMS1587CT-ADJ/NOPB ACTIVE TO-220 NDE 3 45 Green (RoHS
& no Sb/Br) CU SN Level-1-NA-UNLIM 0 to 125 LMS1587
CT-ADJ
LMS1587IS-1.5 NRND DDPAK/
TO-263 KTT 3 45 TBD Call TI Call TI -40 to 125 LMS1587
IS-1.5
LMS1587IS-1.5/NOPB ACTIVE DDPAK/
TO-263 KTT 3 45 Pb-Free (RoHS
Exempt) CU SN Level-3-245C-168 HR -40 to 125 LMS1587
IS-1.5
LMS1587IS-3.3 NRND DDPAK/
TO-263 KTT 3 45 TBD Call TI Call TI -40 to 125 LMS1587
IS-3.3
LMS1587IS-3.3/NOPB ACTIVE DDPAK/
TO-263 KTT 3 45 Pb-Free (RoHS
Exempt) CU SN Level-3-245C-168 HR -40 to 125 LMS1587
IS-3.3
LMS1587IS-ADJ NRND DDPAK/
TO-263 KTT 3 45 TBD Call TI Call TI -40 to 125 LMS1587
IS-ADJ
LMS1587IS-ADJ/NOPB ACTIVE DDPAK/
TO-263 KTT 3 45 Pb-Free (RoHS
Exempt) CU SN Level-3-245C-168 HR -40 to 125 LMS1587
IS-ADJ
LMS1587ISX-3.3/NOPB ACTIVE DDPAK/
TO-263 KTT 3 500 Pb-Free (RoHS
Exempt) CU SN Level-3-245C-168 HR -40 to 125 LMS1587
IS-3.3
LMS1587ISX-ADJ NRND DDPAK/
TO-263 KTT 3 500 TBD Call TI Call TI -40 to 125 LMS1587
IS-ADJ
LMS1587ISX-ADJ/NOPB ACTIVE DDPAK/
TO-263 KTT 3 500 Pb-Free (RoHS
Exempt) CU SN Level-3-245C-168 HR -40 to 125 LMS1587
IS-ADJ
PACKAGE OPTION ADDENDUM
www.ti.com 14-Oct-2017
Addendum-Page 3
Orderable Device Status
(1)
Package Type Package
Drawing Pins Package
Qty Eco Plan
(2)
Lead/Ball Finish
(6)
MSL Peak Temp
(3)
Op Temp (°C) Device Marking
(4/5)
Samples
LMS1587IT-1.5/NOPB ACTIVE TO-220 NDE 3 45 Green (RoHS
& no Sb/Br) CU SN Level-1-NA-UNLIM -40 to 125 LMS1587
IT-1.5
(1) The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2) RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance
do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may
reference these types of products as "Pb-Free".
RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption.
Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of <=1000ppm threshold. Antimony trioxide based
flame retardants must also meet the <=1000ppm threshold requirement.
(3) MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
(4) There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device.
(5) Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation
of the previous line and the two combined represent the entire Device Marking for that device.
(6) Lead/Ball Finish - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead/Ball Finish values may wrap to two lines if the finish
value exceeds the maximum column width.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device Package
Type Package
Drawing Pins SPQ Reel
Diameter
(mm)
Reel
Width
W1 (mm)
A0
(mm) B0
(mm) K0
(mm) P1
(mm) W
(mm) Pin1
Quadrant
LMS1585ACSX-1.5/NOPB DDPAK/
TO-263 KTT 3 500 330.0 24.4 10.75 14.85 5.0 16.0 24.0 Q2
LMS1585ACSX-3.3/NOPB DDPAK/
TO-263 KTT 3 500 330.0 24.4 10.75 14.85 5.0 16.0 24.0 Q2
LMS1585ACSX-ADJ/NOP
BDDPAK/
TO-263 KTT 3 500 330.0 24.4 10.75 14.85 5.0 16.0 24.0 Q2
LMS1585AISX-3.3/NO DDPAK/
TO-263 KTT 3 500 330.0 24.4 10.75 14.85 5.0 16.0 24.0 Q2
LMS1587CSX-1.5/NOPB DDPAK/
TO-263 KTT 3 500 330.0 24.4 10.75 14.85 5.0 16.0 24.0 Q2
LMS1587CSX-3.3 DDPAK/
TO-263 KTT 3 500 330.0 24.4 10.75 14.85 5.0 16.0 24.0 Q2
LMS1587CSX-3.3/NOPB DDPAK/
TO-263 KTT 3 500 330.0 24.4 10.75 14.85 5.0 16.0 24.0 Q2
LMS1587CSX-ADJ/NOPB DDPAK/
TO-263 KTT 3 500 330.0 24.4 10.75 14.85 5.0 16.0 24.0 Q2
LMS1587ISX-3.3/NOPB DDPAK/
TO-263 KTT 3 500 330.0 24.4 10.75 14.85 5.0 16.0 24.0 Q2
LMS1587ISX-ADJ DDPAK/
TO-263 KTT 3 500 330.0 24.4 10.75 14.85 5.0 16.0 24.0 Q2
LMS1587ISX-ADJ/NOPB DDPAK/ KTT 3 500 330.0 24.4 10.75 14.85 5.0 16.0 24.0 Q2
PACKAGE MATERIALS INFORMATION
www.ti.com 8-Mar-2017
Pack Materials-Page 1
Device Package
Type Package
Drawing Pins SPQ Reel
Diameter
(mm)
Reel
Width
W1 (mm)
A0
(mm) B0
(mm) K0
(mm) P1
(mm) W
(mm) Pin1
Quadrant
TO-263
*All dimensions are nominal
Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm)
LMS1585ACSX-1.5/NOPB DDPAK/TO-263 KTT 3 500 367.0 367.0 45.0
LMS1585ACSX-3.3/NOPB DDPAK/TO-263 KTT 3 500 367.0 367.0 45.0
LMS1585ACSX-ADJ/NOP
BDDPAK/TO-263 KTT 3 500 367.0 367.0 45.0
LMS1585AISX-3.3/NO DDPAK/TO-263 KTT 3 500 367.0 367.0 45.0
LMS1587CSX-1.5/NOPB DDPAK/TO-263 KTT 3 500 367.0 367.0 45.0
LMS1587CSX-3.3 DDPAK/TO-263 KTT 3 500 367.0 367.0 45.0
LMS1587CSX-3.3/NOPB DDPAK/TO-263 KTT 3 500 367.0 367.0 45.0
LMS1587CSX-ADJ/NOPB DDPAK/TO-263 KTT 3 500 367.0 367.0 45.0
LMS1587ISX-3.3/NOPB DDPAK/TO-263 KTT 3 500 367.0 367.0 45.0
LMS1587ISX-ADJ DDPAK/TO-263 KTT 3 500 367.0 367.0 45.0
LMS1587ISX-ADJ/NOPB DDPAK/TO-263 KTT 3 500 367.0 367.0 45.0
PACKAGE MATERIALS INFORMATION
www.ti.com 8-Mar-2017
Pack Materials-Page 2
MECHANICAL DATA
NDE0003B
www.ti.com
MECHANICAL DATA
KTT0003B
www.ti.com
BOTTOM SIDE OF PACKAGE
TS3B (Rev F)
IMPORTANT NOTICE
Texas Instruments Incorporated (TI) reserves the right to make corrections, enhancements, improvements and other changes to its
semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers
should obtain the latest relevant information before placing orders and should verify that such information is current and complete.
TI’s published terms of sale for semiconductor products (http://www.ti.com/sc/docs/stdterms.htm) apply to the sale of packaged integrated
circuit products that TI has qualified and released to market. Additional terms may apply to the use or sale of other types of TI products and
services.
Reproduction of significant portions of TI information in TI data sheets is permissible only if reproduction is without alteration and is
accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such reproduced
documentation. Information of third parties may be subject to additional restrictions. Resale of TI products or services with statements
different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the
associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements.
Buyers and others who are developing systems that incorporate TI products (collectively, “Designers”) understand and agree that Designers
remain responsible for using their independent analysis, evaluation and judgment in designing their applications and that Designers have
full and exclusive responsibility to assure the safety of Designers' applications and compliance of their applications (and of all TI products
used in or for Designers’ applications) with all applicable regulations, laws and other applicable requirements. Designer represents that, with
respect to their applications, Designer has all the necessary expertise to create and implement safeguards that (1) anticipate dangerous
consequences of failures, (2) monitor failures and their consequences, and (3) lessen the likelihood of failures that might cause harm and
take appropriate actions. Designer agrees that prior to using or distributing any applications that include TI products, Designer will
thoroughly test such applications and the functionality of such TI products as used in such applications.
TI’s provision of technical, application or other design advice, quality characterization, reliability data or other services or information,
including, but not limited to, reference designs and materials relating to evaluation modules, (collectively, “TI Resources”) are intended to
assist designers who are developing applications that incorporate TI products; by downloading, accessing or using TI Resources in any
way, Designer (individually or, if Designer is acting on behalf of a company, Designer’s company) agrees to use any particular TI Resource
solely for this purpose and subject to the terms of this Notice.
TI’s provision of TI Resources does not expand or otherwise alter TI’s applicable published warranties or warranty disclaimers for TI
products, and no additional obligations or liabilities arise from TI providing such TI Resources. TI reserves the right to make corrections,
enhancements, improvements and other changes to its TI Resources. TI has not conducted any testing other than that specifically
described in the published documentation for a particular TI Resource.
Designer is authorized to use, copy and modify any individual TI Resource only in connection with the development of applications that
include the TI product(s) identified in such TI Resource. NO OTHER LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE
TO ANY OTHER TI INTELLECTUAL PROPERTY RIGHT, AND NO LICENSE TO ANY TECHNOLOGY OR INTELLECTUAL PROPERTY
RIGHT OF TI OR ANY THIRD PARTY IS GRANTED HEREIN, including but not limited to any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information
regarding or referencing third-party products or services does not constitute a license to use such products or services, or a warranty or
endorsement thereof. Use of TI Resources may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.
TI RESOURCES ARE PROVIDED “AS IS” AND WITH ALL FAULTS. TI DISCLAIMS ALL OTHER WARRANTIES OR
REPRESENTATIONS, EXPRESS OR IMPLIED, REGARDING RESOURCES OR USE THEREOF, INCLUDING BUT NOT LIMITED TO
ACCURACY OR COMPLETENESS, TITLE, ANY EPIDEMIC FAILURE WARRANTY AND ANY IMPLIED WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF ANY THIRD PARTY INTELLECTUAL
PROPERTY RIGHTS. TI SHALL NOT BE LIABLE FOR AND SHALL NOT DEFEND OR INDEMNIFY DESIGNER AGAINST ANY CLAIM,
INCLUDING BUT NOT LIMITED TO ANY INFRINGEMENT CLAIM THAT RELATES TO OR IS BASED ON ANY COMBINATION OF
PRODUCTS EVEN IF DESCRIBED IN TI RESOURCES OR OTHERWISE. IN NO EVENT SHALL TI BE LIABLE FOR ANY ACTUAL,
DIRECT, SPECIAL, COLLATERAL, INDIRECT, PUNITIVE, INCIDENTAL, CONSEQUENTIAL OR EXEMPLARY DAMAGES IN
CONNECTION WITH OR ARISING OUT OF TI RESOURCES OR USE THEREOF, AND REGARDLESS OF WHETHER TI HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Unless TI has explicitly designated an individual product as meeting the requirements of a particular industry standard (e.g., ISO/TS 16949
and ISO 26262), TI is not responsible for any failure to meet such industry standard requirements.
Where TI specifically promotes products as facilitating functional safety or as compliant with industry functional safety standards, such
products are intended to help enable customers to design and create their own applications that meet applicable functional safety standards
and requirements. Using products in an application does not by itself establish any safety features in the application. Designers must
ensure compliance with safety-related requirements and standards applicable to their applications. Designer may not use any TI products in
life-critical medical equipment unless authorized officers of the parties have executed a special contract specifically governing such use.
Life-critical medical equipment is medical equipment where failure of such equipment would cause serious bodily injury or death (e.g., life
support, pacemakers, defibrillators, heart pumps, neurostimulators, and implantables). Such equipment includes, without limitation, all
medical devices identified by the U.S. Food and Drug Administration as Class III devices and equivalent classifications outside the U.S.
TI may expressly designate certain products as completing a particular qualification (e.g., Q100, Military Grade, or Enhanced Product).
Designers agree that it has the necessary expertise to select the product with the appropriate qualification designation for their applications
and that proper product selection is at Designers’ own risk. Designers are solely responsible for compliance with all legal and regulatory
requirements in connection with such selection.
Designer will fully indemnify TI and its representatives against any damages, costs, losses, and/or liabilities arising out of Designer’s non-
compliance with the terms and provisions of this Notice.
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2017, Texas Instruments Incorporated
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Texas Instruments:
LMS1585ACS-1.5 LMS1585ACS-1.5/NOPB LMS1585ACS-3.3 LMS1585ACS-3.3/NOPB LMS1585ACSX-1.5
LMS1585ACSX-1.5/NOPB LMS1585ACSX-3.3 LMS1585ACSX-3.3/NOPB LMS1585ACSX-ADJ LMS1585ACSX-
ADJ/NOPB LMS1585ACT-1.5 LMS1585ACT-1.5/NOPB LMS1585ACT-3.3 LMS1585ACT-3.3/NOPB LMS1585AIS-
1.5 LMS1585AIS-1.5/NOPB LMS1585AIS-3.3 LMS1585AIS-3.3/NOPB LMS1585AISX-3.3/NO