PA2010/SMPA2010 200 TO 2000 MHz TO-8 CASCADABLE AMPLIFIER * HIGH POWER OUTPUT: +25.5 dBm (TYP.) * HIGH THIRD ORDER IP3: +33 dBm (TYP.) * MODERATE NOISE FIGURE: 5.0 dB (TYP.) * LOW VSWR: 1.5:1 (TYP.) Typical Performance @ 25C Specifications (Rev. Date: 2/02)* Characteristics Typical Frequency Small Signal Gain (min.) Gain Flatness (max.) Reverse Isolation Noise Figure (max.) Power Output @ 1 dB comp. (min.) IP3 IP2 Second Order Harmonic IP VSWR Input / Output (max.) DC Current @ 15 Volts (max.) * 0.2-2.4 GHz 10.0 dB 0.3 dB 20 dB 5.0 dB 25.5 dBm +33 dBm +50 dBm +55 dBm 1.8:1 / 1.5:1 179 mA Guaranteed 0 to 50C -54 to +85C 0.2-2.0 GHz 9.0 dB 0.7 dB 0.2-2.0 GHz 8.5 dB 1.0 dB 6.5 dB 23.5 dBm 7.0 dB 23.0 dBm 1.9:1 / 1.7:1 187 mA 2.0:1 / 1.8:1 189 mA CPA2010 is a standard PA2010 installed in an SMA connectorized housing and is guaranteed over 0C to 50C with the PA2010's specifications limits of -54C to+85C. Measured in a 50-ohm system at +15 Vdc Nominal. Subject to change without notice. Absolute Maximum Ratings Storage Temperature Max. Case Temperature Max. DC Voltage Max. Continuous RF Input Power Max. Short Term RF Input Power (1 minute max.) Max. Peak Power (3 sec max.) "S" Series Burn-in Temperature (Case) -62 to +150C 85C +17 Volts +17 dBm 100 mW 0.5 W 85C Thermal Data: Vcc = 15 Vdc Thermal Resistance jc Transistor Power Dissipation Pd Junction Temperature Rise Above Case Tjc 50C/W 1.25 W 63C Outline Drawings Package Figure Model TO-8 BG PA2010 Surface Mount AA SMPA2010 SMA Connectorized CE CPA2010 Specifications subject to change without notice. * North America: 1-800-366-2266 Visit www.macom.com for complete contact and product information.