LBR106 thru LBR110
LEADLESS
SURFACE MOUNT
BRIDGE RECTIFIER
REVERSE VOLTAGE – 600 to 1000 Volts
FORWARD CURRENT – 1.0 Ampere
FEATURES
•
Low profile package – 1.00mm
•
Low power loss & high efficiency
•
High current capability
MECHANICAL DATA
•
Case: Packed with FRP substrate and epoxy underfilled
•
Case Material: “Green” molding compound, UL
flammability classification 94V-0, (No Br. Sb. Cl.)
•
Moisture Sensitivity: Level 1 per J-STD-020C
•
Terminals: Lead Free Plating, solder per J-STD-002 and
JESD22-B102
•
Component in accordance to RoHs 2002/95/EC
•
ESD performance
- 4000V human body model (JESD22-A114)
-
400V machine model (JESD22-A115)
LBR
Dim.
Min. Max.
A 5.20 5.40
B 4.10 4.30
C 5.70 5.90
D 1.00 1.20
E 0.85 0.95
F 0.86 1.16
All dimensions in
millimeter
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
PARAMETER SYMBOL
LBR106 LBR108 LBR110 UNIT
Device marking code Note 106 108 110 ---
Maximum Repetitive Peak Reverse Voltage V
RRM
600 800 1000 V
Maximum RMS Voltage V
RMS
420 560 700 V
Maximum DC Blocking Voltage V
DC
600 800 1000 V
Average Rectified Output Current @T
A
=55°C I
(AV)
1.0 A
Peak Forward Surge Current 8.3ms single half
sine-wave I
FSM
30 A
Operating junction temperature range T
J
-55 to +175 °C
Storage temperature range T
STG
-55 to +175 °C
PARAMETER TEST CONDITIONS SYMBOL
Max. UNIT
Forward Voltage (1) IF=1.0A Tj=25°C V
F
1.0 V
Leakage Current (1) VR=V
DC
Tj=25°C
Tj=125°C I
R
5.0
500 uA
THERMAL CHARACTERISTIC SYMBOL
Typical UNIT
Typical junction capacitance (2) C
J
25 pF
Typical thermal resistance _ Junction to Case (3) R
Θ
JC
50 °C/W
Typical thermal resistance _ Junction to Ambient (3)
R
Θ
JA
100 °C/W
Typical thermal resistance _ Junction to Lead (3) R
Θ
JL
15 °C/W
Note :
REV. 1, Sep-2010, KBDB03
(1) 300us Pulse width, 2% Duty cycle.
(2) Measured at 1.0MHz and applied reverse voltage of 4.0V DC.
(3) Thermal Resistance test performed in accordance with JESD-51. Unit mounted on PC board with 5.0mm
2
(0.03mm thick) land areas.
R
Θ
JL
is measured at the lead
of cathode band,
R
Θ
JC
is measured at the top centre of body.
RATING AND CHARACTERISTIC CURVES
LBR106 thru LBR110
FIG.1- FORWARD CURRENT DERATING CURVE
0
0.2
0.4
0.6
0.8
1
1.2
0 25 50 75 100 125 150 175
AMBIENT TEMPERATURE, (℃)
AVERAGE FORWARD CURRENT, (A)
FIG.2- MAXIMUM NON-REPETITIVE SURGE
CURRENT
0
5
10
15
20
25
30
35
1 10 100
NUMBER OF CYCLES AT 60Hz
PEAK FORWARD SURGE CURRENT,
(A)
FIG.3- TYPICAL FORWORD CHARACTERISTICS
0.01
0.1
1
10
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 1.1 1.2
INSTANTANEOUS FORWARD VOLTAGE, (V)
INSTANTANEOUS FORWA RD
CURRENT, (A)
FIG.4- TYPICAL JUNCTION CAPACITANCE
1
10
100
0.1 1 10 100
REVERSE VOLTAGE, (V)
CAP ACITANCE, (pF)
FIG.5- TYPICAL REVERS E CHARACTERISTICS
0.01
0.1
1
10
0 20 40 60 80 100 120
PERCENT OF RATED PEAK REVERSE VOLTAGE, (V)
INSTANTANEOUS REV ERSE CURRENT,
(uA)
Tj=25°C
Tj=25°C
Tj=100°C
8.3ms Single Half-Wave
60Hz resistive or
inductive load
Tj=25°C, f=1MHz
Mechanics drawing
LBR106 thru LBR110
Marking:
Fig.6 Recommended Foot Print of LBR
O
LBR=Series code
1=1.0A
06=600V
08=800V
10=1000V
Y=Last digit of the year
WW=Mfg. week
Legal Disclaimer Notice
LBR106 thru LBR110
Important Notice and Disclaimer
LSC reserves the right to make changes to this document and its products and specifications
at any time without notice. Customers should obtain and confirm the latest product
information and specifications before final design, purchase or use.
LSC makes no warranty, representation or guarantee regarding the suitability of its products
for any particular purpose, nor does LSC assume any liability for application assistance or
customer product design. LSC does not warrant or accept any liability with products which
are purchased or used for any unintended or unauthorized application.
No license is granted by implication or otherwise under any intellectual property rights of
LSC.
LSC products are not authorized for use as critical components in life support devices or
systems without express written approval of LSC.
