High Efficiency Rectifier 1.0A Glass Passivated EGP10A - EGP10K Features * * * * Superfast Recovery Time for High Efficiency Low Forward Voltage, High Current Capability Low Leakage Current High Surge Current Capability www.onsemi.com ABSOLUTE MAXIMUM RATINGS TA = 25C unless otherwise noted Symbol Value Units Average Rectified Current 0.375 " lead length @ TL = 75_C 1.0 A AXIAL LEAD / DO-41 CASE 017AH Peak Forward Surge Current 8.3 ms single half-sine-wave Superimposed on rated load (JEDEC method) 30 A MARKING DIAGRAM PD Total Device Dissipation Derate above 25_C 2.5 17 W mWC IC Thermal Resistance, Junction to Ambient 50 C/W IO If(surge) Parameter EGP10K $Y&Z&3 EGP10K $Y &Z &3 C TJ, TSTG Junction and Storage Temperature Range -65 ~ 150 Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. *These ratings are limiting values above which the serviceability of any semiconductor device may be impaired. = Specific Device Code = ON Semiconductor Logo = Assembly Code = Date Code ELECTRICAL CHARACTERISTICS TA = 25C unless otherwise noted Device 10A 10B 10C 10D 10F 10G 10J 10K Units Peak Repetitive Reverse Voltage 50 100 150 200 300 400 600 800 V Maximum RMS Voltage 35 70 105 140 210 280 420 560 V DC Reverse Voltage (Rated VR) 50 100 150 200 300 400 600 800 V Parameter Maximum Reverse Current at Rated VR TA = 25_C 5.0 mA TA = 125_C 100 mA Maximum Reverse Recovery Time IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A Maximum Forward Voltage @ 2.0 A Typical Junction Capacitance VR = 4.0 V, f = 1.0 MHz 50 0.95 1.25 22 15 75 nS 1.7 V pF Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. *Pulse Test: Pulse Width 300 ms, Duty Cycle 2%. (c) Semiconductor Components Industries, LLC, 2007 February, 2020 - Rev. 1 1 Publication Order Number: EGP10K/D EGP10A - EGP10K TYPICAL PERFORMANCE CHARACTERISTICS Figure 1. Figure 2. Figure 3. Figure 4. Figure 5. www.onsemi.com 2 EGP10A - EGP10K Reverse Recovery Time Characterstic and Test Circuit Diagram Figure 6. Figure 7. ORDERING INFORMATION Device Package Shipping EGP10K Axial Lead / DO-41 CASE 017AH 5000 / Tape & Reel For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. www.onsemi.com 3 MECHANICAL CASE OUTLINE PACKAGE DIMENSIONS AXIAL LEAD / DO-41 CASE 017AH ISSUE O DATE 31 AUG 2016 25.40 MIN (2X) 5.20 4.06 0.86 0.71 NOTES: UNLESS OTHERWISE SPECIFIED 2.72 2.03 DOCUMENT NUMBER: DESCRIPTION: 98AON13444G AXIAL LEAD / DO-41 A) PACKAGE STANDARD REFERENCE: JEDEC DO-204 VARIATION AL. B) PACKAGE BODY CAN BE PLASTIC OR HERMETICALLY SEALED GLASS. C) ALL DIMENSIONS ARE IN MILLIMETERS. Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed versions are uncontrolled except when stamped "CONTROLLED COPY" in red. PAGE 1 OF 1 ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the rights of others. (c) Semiconductor Components Industries, LLC, 2019 www.onsemi.com ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. "Typical" parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Email Requests to: orderlit@onsemi.com ON Semiconductor Website: www.onsemi.com TECHNICAL SUPPORT North American Technical Support: Voice Mail: 1 800-282-9855 Toll Free USA/Canada Phone: 011 421 33 790 2910 www.onsemi.com 1 Europe, Middle East and Africa Technical Support: Phone: 00421 33 790 2910 For additional information, please contact your local Sales Representative