Schottky Barrier Diode RB056L-40 Applications General rectification Dimensions(Unit : mm) Land size figure(Unit : mm) 2.0 2.0 4.2 Features 1)Small power mold type.(PMDS) 2)Low IR 3)High reliability PMDS Construction Silicon epitaxial planer Structure Taping specifications(Unit : mm) 2.00.05 0.3 1.550.05 120.2 5.50.05 5.30.1 0.05 9.50.1 1.750.1 4.00.1 1.55 2.90.1 4.00.1 2.8MAX Absolute maximum ratings (Ta=25C) Parameter Reverse voltage (repetitive) Reverse voltage (DC) Average rectified forward current (*1) Forward current surge peak (60Hz / 1cyc) Junction temperature Storage temperature Limits Symbol VRM VR Io IFSM Tj Tstg Unit V V A A 40 40 3 70 150 -40to+150 C C (*1)Mounting on epoxi board. (Tc=63CMAX.) Electrical characteristics(Ta=25) Parameter Forward voltage Reverse current www.rohm.com (c)2010 ROHM Co., Ltd. All rights reserved. Symbol VF1 VF2 Min. - Typ. - Max. 0.67 0.58 Unit V V IR - - 50 A 1/3 Conditions IF=3.0A IF=2.0A VR=40V 2010.08 - Rev.B RB056L-40 Data Sheet Electrical characteristics curves 10000 Ta=150C Ta=25C 1 100 CAPACIT ANCE BETWEEN TERMINALS : Ct(pF) 1000 Ta=-25C 10 Ta=75C 10 Ta=25C 1 Ta=-25C 100 10 0.1 1 0.01 100 200 300 400 500 600 0 5 FORWARD VOLTAGE : V F(mV) VF-IF CHARACTERISTICS 10 15 20 25 30 35 0 40 5 REVERSE VOLTAGE : V R(V) VR-IR CHARACTERISTICS 470 REVERSE CURRENT : IR(uA) Ta=25C IF=1A n=30pcs 460 450 AVE:454.3mV 440 15 20 25 30 0.3 20 480 10 REVERSE VOLTAGE : V R(V) VR-Ct CHARACTERISTICS Ta=25C VR=40V n=30pcs 10 CAPACITANCE BETWEEN TERMINAL : Ct(nF) 0 FORWARD VOLTAGE : VF(mV) f=1MHz Ta=125C Ta=125C 100 1000 Ta=150C Ta=75C REVERSE CURRENT : IR(A) FORWARD CURRENT : IF(mA) 1000 Ta=25C f=1MHz VR=0V n=30pcs 0.29 0.28 0.27 AVE : 0.281nF 0.26 AVE : 4.08A 430 0 0.25 Ct DISPERSION MAP VF DISPERSION MAP IR DISPERSION MAP 30 1cyc Ifsm 150 8.3m 100 AVE : 83.0A 50 0 100 Ta=25C IF=0.5A IR=1A Irr=0.25*IR n=10pcs 25 20 15 10 5 AVE : 10.4ns Ifsm 20 t 200 150 100 50 0 10 TIME : t(ms) IFSM-t CHARACTERISTICS www.rohm.com (c)2010 ROHM Co., Ltd. All rights reserved. 100 8.3m 10 100 NUMBER OF CYCLES IFSM-CYCLE CHARACTERISTICS 3 On glass-epoxy board Rth(j-a) 100 Rth(j-c) 10 IM=100mA IF=1A 1 1ms FORWARD POWER DISSIPATION : Pf(W) TRANSIENT THAERMAL IMPEDANCE : Rth (C/W) Ifsm 8.3ms 1 1000 1 40 trr DISPERSION MAP 300 0.1 60 0 0 250 80 1cyc IFSM DISRESION MAP PEAK SURGE FORWARD CURRENT : IFSM(A) PEAK SURGE FORWARD CURRENT : IFSM(A) REVERSE RECOVERY TIME : trr(ns) PEAK SURGE FORWARD CURRENT : IFSM(A) 200 2 DC D=1/2 Sin(=180) 1 time 300s 0.1 0.001 0 0.01 0.1 1 10 TIME : t(s) Rth-t CHARACTERISTICS 2/3 100 1000 0 1 2 3 AVERAGE RECTIFIED FORWARD CURRENT : Io(A) Io-Pf CHARACTERISTICS 2010.08 - Rev.B RB056L-40 Data Sheet 5 7 Io 4.5 AVERAGE RECTIFIED FORWARD CURRENT : Io(A) REVERSE POWER DISSIPATION : PR (W) 0.5 0.4 0.3 D=1/2 DC 0.2 0.1 0A 0V 4 t 3.5 3 10 20 30 REVERSE VOLTAGE : VR(V) VR-PR CHARACTERISTICS Tj=150C T D=1/2 2.5 2 1.5 1 Sin(=180) 0 Sin(=180) 0 D/t/T VR=20V DC 0.5 0 VR 40 AVERAGE RECTIFIED FORWARD CURRENT : Io(A) 0.6 6 DC 0A Io 0V VR t 5 T D=t/T VR=20V Tj=150C D=1/2 4 3 2 Sin(=180) 1 0 0 25 50 75 100 125 AMBIENT TEMPERATURE : Ta(C) Derating Curve"(Io-Ta) 150 0 25 50 75 100 125 CASE TEMPARATURE : Tc(C) Derating Curve"(Io-Tc) 30 ELECTROSTATIC DISCHARGE TEST ESD(KV) No break at 30kV 25 20 15 AVE : 7.3kV 10 5 0 C=200pF R=0 C=100pF R=1.5k ESD DISPERSION MAP www.rohm.com (c)2010 ROHM Co., Ltd. All rights reserved. 3/3 2010.08 - Rev.B Notice Notes No copying or reproduction of this document, in part or in whole, is permitted without the consent of ROHM Co.,Ltd. The content specified herein is subject to change for improvement without notice. The content specified herein is for the purpose of introducing ROHM's products (hereinafter "Products"). If you wish to use any such Product, please be sure to refer to the specifications, which can be obtained from ROHM upon request. Examples of application circuits, circuit constants and any other information contained herein illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. Great care was taken in ensuring the accuracy of the information specified in this document. However, should you incur any damage arising from any inaccuracy or misprint of such information, ROHM shall bear no responsibility for such damage. The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM and other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the use of such technical information. The Products specified in this document are intended to be used with general-use electronic equipment or devices (such as audio visual equipment, office-automation equipment, communication devices, electronic appliances and amusement devices). The Products specified in this document are not designed to be radiation tolerant. While ROHM always makes efforts to enhance the quality and reliability of its Products, a Product may fail or malfunction for a variety of reasons. Please be sure to implement in your equipment using the Products safety measures to guard against the possibility of physical injury, fire or any other damage caused in the event of the failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM shall bear no responsibility whatsoever for your use of any Product outside of the prescribed scope or not in accordance with the instruction manual. The Products are not designed or manufactured to be used with any equipment, device or system which requires an extremely high level of reliability the failure or malfunction of which may result in a direct threat to human life or create a risk of human injury (such as a medical instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuelcontroller or other safety device). ROHM shall bear no responsibility in any way for use of any of the Products for the above special purposes. If a Product is intended to be used for any such special purpose, please contact a ROHM sales representative before purchasing. If you intend to export or ship overseas any Product or technology specified herein that may be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to obtain a license or permit under the Law. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http://www.rohm.com/contact/ www.rohm.com (c) 2010 ROHM Co., Ltd. All rights reserved. R1010A