MB15(W) / 25(W) / 35(W) HIGH CURRENT SILICON BRIDGE RECTIFIER NOT RECOMMENDED FOR NEW DESIGN, USE GBPC15 SERIES, GBPC25 SERIES, OR GBPC35 SERIES Features * * * * * * MB High Conductivity H Metal Case B Superior Thermal Design E Dim Min Max Universal Terminals; Snap-on, Solder or P.C. Board Mounting A 28.40 28.70 Lead Free Finish, RoHS Compliant (Date Code 0514+) (Note 2) B 10.97 11.23 C 15.50 17.60 E 22.86 25.40 G 13.30 15.30 Terminals Solderable per MIL-STD-202, Method 208 A C Mechanical Data * * * * * * * H (AC) (+) Terminals: 0.25" Faston Terminals J C Case material - UL Flammability Rating Classification 94V-0 A H (AC) (-) 4.85AE 5.59AE 17.10 19.10 K 10.40 12.40 L 0.97AE Nominal 1.07AE M 30.50 3/4 N 10.97 11.23 P 17.10 19.10 Moisture sensitivity: Level 1 per J-STD-020C Approx Weight: 29 grams J G Mounting Position: Bolt Down on Heat-sink with Silicone Thermal Compound Between Bridge and Mounting Surface for Maximum Heat Transfer Efficiency MB-W H Mounting Torque: 20 in. lb. Max. N M Polarity: Polarity Symbols Marked on Case L Hole for #10 screw A H P (AC) (+) P K (-) A (AC) Maximum Ratings and Electrical Characteristics Suffix "W" denotes wire leads Rating at 25C ambient temperature unless otherwise specified. Symbol -05 -1 -2 -4 -6 -8 -10 Units Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 V Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 V Characteristic Maximum Average Rectified Output Current @ TC = 55C MB15 MB25 MB35 Peak Forward Surge Current Single Half Sine-Wave Superimposed on Rated Load Maximum Instantaneous @ 7.5A Forward Voltage Drop per @12.5A Rated Load @17.5A Maximum Reverse DC current at Rated DC Blocking Voltage (per Element) I2t rating for fusing (8.3ms) Typical Thermal Resistance (Note 1) Operating and Storage Temperature Range Notes: I(AV) 15.0 25.0 35.0 A MB15 MB25 MB35 IFSM 300 300 400 A MB15 MB25 MB35 VF 1.1 1.1 1.2 V @TA = 25C @TA = 100C IR 10 1.0 A mA MB15 MB25 MB35 I2 t 373 373 664 A2 s RqJC 2.5 C/W TJ, TSTG -55 to +150 C 1. Thermal Resistance from junction to case 2. EC Directive 2002/95/EC (RoHS) revision 13.2.2003. Glass and High Temperature Solder Exemptions Applied, see EU Directive Annex Notes 5 and 7. DS21303 Rev. 7 - 3 1 of 4 www.diodes.com MB15(W)/25(W)/35(W) a Diodes Incorporated AVERAGE FORWARD OUTPUT CURRENT (AMPERES) MB35 RthS-A = 0.5C/W 30 25 20 MB25 RthS-A = 0.5C/W 15 MB15 RthS-A = 1.0C/W 10 5 60Hz Resistive or Inductive Load 0 MB35 10 TC = 100C 1.0 0.1 TA = 25C 0.01 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Fig. 3 Typical Reverse Characteristics 23 X 9 X 11.8 cm Wing Plate 35 30 MB25 25 20 MB15 15 10 5 60 Hz Resistive or Inductive 0 20 40 60 80 100 AMBIENT TEMPERATURE (C) Fig. 1 Maximum Output Rectified Current PEAK FORWARD SURGE CURRENT (AMPERES) AVERAGE OUTPUT CURRENT (AMPERES) 35 0 INSTANTANEOUS REVERSE CURRENT (mA) 40 40 0 50 100 150 200 CASE TEMPERATURE (C) Fig. 2 Maximum Output Rectified Current 500 400 300 MB35 200 MB25, MB15 100 0 1.0 10 100 NUMBER OF CYCLES AT 60 Hz Fig. 4 Maximum Non-Repetitive Peak Forward Surge current NOT RECOMMENDED FOR NEW DESIGN, USE GBPC15 SERIES, GBPC25 SERIES, OR GBPC35 SERIES DS21303 Rev. 7 - 3 2 of 4 www.diodes.com MB15(W)/25(W)/35(W) Ordering Information Notes: (Note 3) Device Packaging Shipping MB1505 MB 100/Bulk MB151 MB 100/Bulk MB152 MB 100/Bulk MB154 MB 100/Bulk MB156 MB 100/Bulk MB158 MB 100/Bulk MB1510 MB 100/Bulk MB1505W MB-W 100/Bulk MB151W MB-W 100/Bulk MB152W MB-W 100/Bulk MB154W MB-W 100/Bulk MB156W MB-W 100/Bulk MB158W MB-W 100/Bulk MB1510W MB-W 100/Bulk MB2505 MB 100/Bulk MB251 MB 100/Bulk MB252 MB 100/Bulk MB254 MB 100/Bulk MB256 MB 100/Bulk MB258 MB 100/Bulk MB2510 MB 100/Bulk MB2505W MB-W 100/Bulk MB251W MB-W 100/Bulk MB252W MB-W 100/Bulk MB254W MB-W 100/Bulk MB256W MB-W 100/Bulk MB258W MB-W 100/Bulk MB2510W MB-W 100/Bulk MB3505 MB 100/Bulk MB351 MB 100/Bulk MB352 MB 100/Bulk MB354 MB 100/Bulk MB356 MB 100/Bulk MB358 MB 100/Bulk MB3510 MB 100/Bulk MB3505W MB-W 100/Bulk MB351W MB-W 100/Bulk MB352W MB-W 100/Bulk MB354W MB-W 100/Bulk MB356W MB-W 100/Bulk MB358W MB-W 100/Bulk MB3510W MB-W 100/Bulk 3 . For packaging details, visit our website at http://www.diodes.com/datasheets/ap2008.pdf DS21303 Rev. 7 - 3 3 of 4 www.diodes.com MB15(W)/25(W)/35(W) IMPORTANT NOTICE Diodes, Inc. and its subsidiaries reserve the right to make changes without further notice to any product herein to make corrections, modifications, enhancements, improvements, or other changes. Diodes, Inc. does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages. LIFE SUPPORT The products located on our website at www.diodes.com are not recommended for use in life support systems where a failure or malfunction of the component may directly threaten life or cause injury without the expressed written approval of Diodes Incorporated. NOT RECOMMENDED FOR NEW DESIGN, USE GBPC15 SERIES, GBPC25 SERIES, OR GBPC35 SERIES DS21303 Rev. 7 - 3 4 of 4 www.diodes.com MB15(W)/25(W)/35(W)