2018.7⑤
Multi-contact Compact Circular Connectors
RM Series
Product Specifi cations
Ratings
Rated current
[RM15] 10A (2 and 4 contacts)
5A (8, 10, and 12 contacts)
[RM12, 21] 5A
Operating
temperature
range
-25 to +85ç
Rated voltage
[RM12] AC 600V, DC 840V (2 contacts)
AC 500V, DC 700V (3 and 4 contacts)
AC 350V, DC 490V (5, 6 and 7 contacts)
[RM15] AC 600V, DC 840V (2 contacts)
AC 500V, DC 700V (4 and 8 contacts)
AC 350V, DC 490V (10 and 12 contacts)
[RM21] AC 500V, DC 700V (15 contacts)
AC 350V, DC 490V (20 contacts)
Storage
temperature
range
-10 to +60ç
Items Specifi cations Conditions
1. Contact
resistance
[RM12, 21] 4mø max.
[RM15] 4mø max. (8, 10, and 12 contacts)
[RM15] 2mø max. (2 and 4 contacts)
Measured at DC 1A
2. Insulation
resistance 1,000Mø min. Measured at DC 500V
3. Withstanding
voltage No fl ashover or dielectric breakdown.
[RM12] AC 1,800V for 1 minute (2 contacts)
AC 1,500V for 1 minute (3 and 4 contacts)
AC 1,000V for 1 minute (5, 6 and 7 contacts)
[RM15] AC 1,800V for 1 minute (2 contacts)
AC 1,500V for 1 minute (4 and 8 contacts)
AC 1,000V for 1 minute (10 and 12 contacts)
[RM21] AC 1,500V for 1 minute (15 contacts)
AC 1,000V for 1 minute (20 contacts)
4. Vibration
resistance No electrical discontinuity for 10µs. or greater 10 to 55Hz/cycle, full amplitude : 0.75mm, 3 axis directions,
2 hours each
5. Shock
resistance No electrical discontinuity for 10µs. or greater Acceleration : 490m/s2, duration : 11ms
3 axis directions, 3 times each
6. Mating cycles Contact resistance : 8mø max. 2,000 times
7. Temperature
cycle Insulation resistance : 100Mø min.
-55°C : 30 minutes ➝ Normal temperature : 10 to 15 minutes
➝ 85°C : 30 minutes ➝ Normal temperature : 10 to 15
minutes, left for 5 cycles
8. Moisture
resistance Insulation resistance : 100Mø min. (when dry) Temperature : 40°C, relative humidity : 90 to 95%, left for
96 hours
In cases where the application will demand a high level of reliability, such as automotive,
please contact a company representative for further information.
Features
1. Wide variations
The RM Series provides a wide selection of
plug and receptacle types to satisfy various
kinds of application requirements.
Available position counts : 2, 3, 4, 5, 6, 7, 8,
10, 12, 15, and 20.
Available lock mechanisms : threaded
coupling type, bayonet sleeve type, and
quick detachable type.
1
Jan.1.2021Copyright2021HIROSEELECTRICCO.,LTD.AllRightsReserved.
Product Number Structure
Refer to the chart below when determining the product specifications from the product number.
Please select from the product numbers listed in this catalog when placing orders.
Plug
RM 15 T P A -2S(**)
q w ert y u i
qModel name : RM Series (Round Miniature Series)
wShell size : The shell size refers to the outer shell diameter of the mating interface of the plug.
eLock mechanism
T : Threaded coupling type
B : Bayonet sleeve type
Q : Quick detachable type
rConnector type
(1)
P : Plug
J : Jack
P-C : Plug cap
R-F : Square fl ange for receptacle
(2)
R : Receptacle
R-C : Receptacle cap
R-B : Cord bushing
tForm variation class : Indicates a variation or change within the series.
yNumber of contacts
uContact form
P : Male contact
S : Female contact
iOther specifi cations : A two-digit number is added to indicate other specifi cations.
Materials / Finish
Items Material Finish Remarks
Plated shell Brass, zinc alloy
Aluminum alloy
Nickel plating
Chromium plating ----------------------
Insulator Diallyl phthalate resin
Polycarbonate resin, PPS ---------------------- UL94V-0
(Black)
Contact Brass or copper alloy Silver plating ----------------------
Please note that materials will differ depending on the actual part number.
2
RM Series●Multi-contact Compact Circular Connectors
Jan.1.2021Copyright2021HIROSEELECTRICCO.,LTD.AllRightsReserved.
RM12B connectors (bayonet sleeve type)
Plug
Cable clamp range:
5mm min. to 8mm max.
２１
Ø8
Ø 11.9
Ø18
41
17(HEX)
7
1.5
6.9
A
6
19.6
M14×0.75
１２
２１
Ø14.1
Ø17
Part No. HRS No. No. of contacts
RM12BPE-2S(71) 109-0423-0 71 2
RM12BPE-3S(71) 109-0424-2 71 3
RM12BPE-4S(71) 109-0425-5 71 4
RM12BPE-5S(71) 109-0426-8 71 5
RM12BPE-6S(81) 109-0427-0 81 6
RM12BPE-7S(71) 109-0428-3 71 7
Part No. HRS No.
No. of contacts
A
RM12BRD-2PH(71) 109-0823-8 71 2
20.5
RM12BRD-3PH(71) 109-0824-0 71 3
RM12BRD-4PH(71) 109-0825-3 71 4
RM12BRD-5PH(71) 109-0826-6 71 5
RM12BRD-6PH(71) 109-0827-9 71 6
RM12BRD-7PH(71) 109-0828-1 71 7
Remarks : See page 12 for details on recommended panel cut-out.
Part No. HRS No.
No. of contacts
A
RM12BRD-2S(71) 109-0609-8 71 2
21.6
RM12BRD-3S(71) 109-0610-7 71 3
RM12BRD-4S(71) 109-0611-0 71 4
RM12BRD-5S(71) 109-0612-2 71 5
RM12BRD-6S(81) 109-0613-5 81 6
RM12BRD-7S(71) 109-0619-1 71 7
Part No. HRS No. No. of contacts
RM12BPE-2PH(71) 109-0417-7 71 2
RM12BPE-3PH(71) 109-0418-0 71 3
RM12BPE-4PH(71) 109-0419-2 71 4
RM12BPE-5PH(71) 109-0420-1 71 5
RM12BPE-6PH(71) 109-0421-4 71 6
RM12BPE-7PH(71) 109-0422-7 71 7
(Representative example.)
(Representative example.)
Receptacle (Jam nut to be fastened)
3
RM Series●Multi-contact Compact Circular Connectors
Jan.1.2021Copyright2021HIROSEELECTRICCO.,LTD.AllRightsReserved.
21
21
16
21
16
A
1.5
9
4.5
Ø14.1
Ø14.1
4 - Ø2.9
12
Cable clamp range:
5mm min. to 8mm max.
A maximum of 0.6mm
40
7
Ø8
16
Ø 14.1
Part No. HRS No.
No. of contacts
A
RM12BRB-2S 109-0577-3 2
21.6
RM12BRB-3S 109-0578-6 3
RM12BRB-4S 109-0579-9 4
RM12BRB-5S 109-0580-8 5
RM12BRB-6S(81) 109-0581-0 81 6
RM12BRB-7S 109-0615-0 7
Part No. HRS No. No. of contacts
RM12BJB-2S(07) 109-0638-6 07 2
RM12BJB-3S(07) 109-0639-9 07 3
RM12BJB-4S(07) 109-0640-8 07 4
RM12BJB-5S(07) 109-0641-0 07 5
RM12BJB-6S(81) 109-0642-3 81 6
RM12BJB-7S(07) 109-0643-6 07 7
Part No. HRS No.
No. of contacts
A
RM12BRB-2PH 109-0817-5 2
20.5
RM12BRB-3PH 109-0818-8 3
RM12BRB-4PH 109-0819-0 4
RM12BRB-5PH 109-0820-0 5
RM12BRB-6PH 109-0821-2 6
RM12BRB-7PH 109-0822-5 7
Part No. HRS No. No. of contacts
RM12BJB-2PH 109-0829-4 2
RM12BJB-3PH 109-0830-3 3
RM12BJB-4PH 109-0831-6 4
RM12BJB-5PH 109-0832-9 5
RM12BJB-6PH 109-0833-1 6
RM12BJB-7PH 109-0834-4 7
(Representative example.)
(Representative example.)
Receptacle (Integral, square flange)
Jack
Remarks : 1. See page 12 for details on recommended panel cut-out.
2. Please note that the RM12BRB differs in mounting dimensions from the RM12BR-F.
4
RM Series●Multi-contact Compact Circular Connectors
Jan.1.2021Copyright2021HIROSEELECTRICCO.,LTD.AllRightsReserved.
Cable clamp range:
5mm min. to 8mm max.
４１
３２
Ø 15.2
Ø23
36.5
Ø 11.5
M17×0.75
３
３
２
１４
４１
２
0.5
Ø20
A
6.5 1.5
Ø17.4
3
21 (HEX)
7.6
24.2
7
Part No. HRS No. No. of contacts A
RM15QRD-2PA(71) 109-0880-1 71 2 21.0
RM15QRD-4PA(71) 109-0881-4 71 4
RM15QRD-8PH(71) 109-0854-1 71 8
20.6RM15QRD-10PH(71) 109-0855-4 71 10
RM15QRD-12PH(71) 109-0982-1 71 12
Remarks : See page 12 for details on recommended panel cut-out.
Part No. HRS No. No. of contacts A
RM15QRD-2SA(71) 109-0841-0 71 2 21.7
RM15QRD-4SA(81) 109-0842-2 81 4
RM15QRD-8S(71) 109-0864-5 71 8
21.6RM15QRD-10S(71) 109-0779-8 71 10
RM15QRD-12S(71) 109-0983-4 71 12
(Representative example.)
(Representative example.)
RM15Q connectors (quick detachable type)
Plug
Receptacle (Jam nut to be fastened)
Part No. HRS No. No. of contacts
RM15QPS-2SA(71) 109-0839-8 71 2
RM15QPS-4SA(81) 109-0840-7 81 4
RM15QPS-8S(71) 109-0852-6 71 8
RM15QPS-10S(71) 109-0853-9 71 10
RM15QPS-12S(71) 109-0981-9 71 12
Part No. HRS No. No. of contacts
RM15QPS-2PA(71) 109-0896-1 71 2
RM15QPS-4PA(71) 109-0897-4 71 4
RM15QPS-8PH(71) 109-0850-0 71 8
RM15QPS-10PH(71) 109-0851-3 71 10
RM15QPS-12PH(71) 109-0980-6 71 12
5
RM Series●Multi-contact Compact Circular Connectors
Jan.1.2021Copyright2021HIROSEELECTRICCO.,LTD.AllRightsReserved.
ØC
B
(Maximum cord diameter)
ØA
ØD
L
M19×1
M17×0.75
Ø20
7
1.5
6.5
A
21（HEX）
7.6
24.2
0.5
3
Part No. HRS No. No. of contacts A
RM15TRH-2PA(71) 109-0886-8 71 221
RM15TRH-2SA(71) 109-0847-6 71 21.7
RM15TRH-4SA(81) 109-0848-9 81 421
RM15TRH-4PA(71) 109-0887-0 71
RM15TRH-8PH(71) 109-0858-2 71 820.6
RM15TRH-8S(71) 109-0868-6 71 21.6
RM15TRH-10PH(71) 109-0859-5 71 10 20.6
RM15TRH-10S(71) 109-0869-9 71 21.6
Remarks : See page 12 for details on recommended panel cut-out.
(Representative example.)
(Representative example.)
RM [ ] T connectors (threaded coupling type)
Plug
Receptacle (Jam nut to be fastened)
Part No. HRS No. No. of contacts ØA B ØC ØD L
RM15TP-2SA(71) 109-0845-0 71 2
15.2 M19×1 11.5 21.5 34
RM15TP-2PA(71) 109-0898-7 71
RM15TP-4SA(81) 109-0846-3 81 4
RM15TP-4PA(71) 109-0899-0 71
RM15TP-8S(71) 109-0053-2 71 8
RM15TP-8PH(71) 109-0856-7 71
RM15TP-10S(71) 109-0055-8 71 10
RM15TP-10PH(71) 109-0857-0 71
RM21TP-15S(81) 109-0321-0 81 15
21 TM25×2 15 28 37
RM21TP-15P(71) 109-0323-5 71
RM21TP-20S(81) 109-0322-2 81 20
RM21TP-20P(71) 109-0324-8 71
Remarks : TM25x2 represents 30° trapezoidal thread profi le.
6
RM Series●Multi-contact Compact Circular Connectors
Jan.1.2021Copyright2021HIROSEELECTRICCO.,LTD.AllRightsReserved.
B
C
6
D21
6.5
2.5
φA
Part No. HRS No. No. of contacts ØA B C D
RM21TR-15S(81) 109-0327-6 81 15
27 TM25×2 M22×0.75 23.5
RM21TR-15P(71) 109-0325-0 71
RM21TR-20S(81) 109-0328-9 81 20
RM21TR-20P(71) 109-0326-3 71
Remarks : 1. TM25x2 represents 30° trapezoidal thread profi le.
2. See page 12 for details on recommended panel cut-out.
(Representative example.)
Receptacle (Jam nut to be fastened)
7
RM Series●Multi-contact Compact Circular Connectors
Jan.1.2021Copyright2021HIROSEELECTRICCO.,LTD.AllRightsReserved.
Ø9.8
TM20×2
９
８１
１０
４
２
３
５
６
７
50 20
Ø23
Ø15
TM20×2
Ø9.8
９
８１
１０ ４
２
３
５
６
７
49
Ø21
20
１
２
３
４５
６
７
８
９
１０
１
２
３
４５
６
７
８
９
１０
TM20×2
M17×0.75
96
A
21（HEX）
7.6
24.2
Part No. HRS No. No. of contacts
RM15TPD-10P(71) 109-0601-6 71 10
RM15TPD-10S(71) 109-0686-9 71
RM15TPD-12P(71) 109-0660-5 71 12
RM15TPD-12S(71) 109-0661-8 71
Part No. HRS No. No. of contacts
RM15TJD-10P(71) 109-0706-4 71 10
RM15TJD-10S(71) 109-0603-1 71
RM15TJD-12P(71) 109-0715-5 71 12
RM15TJD-12S(71) 109-0665-9 71
Part No. HRS No. No. of contacts A
RM15TRD-10P(71) 109-0687-1 71 10 20.5
RM15TRD-10S(71) 109-0602-9 71 21.3
RM15TRD-12P(71) 109-0662-0 71 12 20.5
RM15TRD-12S(71) 109-0663-3 71 21.3
Remarks : See page 12 for details on recommended panel cut-out.
(Representative example.)
(Representative example.)
(Representative example.)
RM15T (type D) connectors
Plug (solder type)
Jack (solder type)
Receptacle (solder type)
8
RM Series●Multi-contact Compact Circular Connectors
Jan.1.2021Copyright2021HIROSEELECTRICCO.,LTD.AllRightsReserved.
B
A
Ø15
Ø23
１
１０
４
２
３
５
６
７
８
９
TM20×2
ØC
１０
９
８
７
６
４
５
３
２
１
M17×0.75
TM20×2
21（HEX）
19.5
96
Mating guide
Dip post arrangement dimensions when
viewed from the mating end
TM20×2
Dip post diameter
Ø0.8
M17×0.75
１
２
３
５４
６
７
８
９
１０
Mating guide position
１０
９
１
２
３
５４
６
７
８
4
4
4
2
2
4
1.5 1.5
B
69
19.5
A
21（HEX）
Part No. HRS No. No. of contacts
RM15TRD-10SC(71) 109-0676-5 71 10
Remarks : See page 12 for details on recommended panel cut-out.
Part No. HRS No. No. of contacts A B ØC
RM15TPD-10PC(71) 109-0677-8 71 10 50 20 9.8
RM15TPN-10PC(71) 109-0712-7 71 40 15 8
Part No. HRS No. No. of contacts A B
RM15TRD-10SB(71) 109-0710-1 71 10 32.3 8.3
Remarks : See page 12 for details on recommended panel cut-out.
(Representative example.)
(Representative example.)
(Representative example.)
Plug (crimp type)
Receptacle (crimp type)
Receptacle (dip type)
9
RM Series●Multi-contact Compact Circular Connectors
Jan.1.2021Copyright2021HIROSEELECTRICCO.,LTD.AllRightsReserved.
Ｂ
ØＡ
Ｃ
Ｄ
100
φ3.3
Ø6
100
ØＡ
Ｂ
Ｃ
Ｄ
Ø6
Ø 3.3
Part No. HRS No. ØA B C D
RM15TR-C(31) 109-0080-5 31 21.5 M19X1 9 13.5
RM21TR-C(31) 109-0354-9 31 28 TM25X2 8 12.5
RM Series accessories
Cap
Plug cap
Receptacle cap
Part No. HRS No. ØA B C D
RM15TP-C(71) 109-0079-6 71 21.5 M19X1 12 16.5
RM21TP-C(71) 109-0353-6 71 28 TM25X2 17.5 22
Ｃ
Ｄ
Ｂ
Ｃ
Ｄ
ØＡ
Part No. HRS No. ØA B C D
RM12BR-F(71) 109-0154-0 71 14.1 6 18 26
RM15TR-F(71) 109-0319-8 71 17.1 7.6 20.6 28
Square flange
Ø10.7
31
Ø6.4
Ø8
Part No. HRS No. Remarks
RM12BPG-B(71) 109-0776-0 71 -----------
Cord bushing
10
RM Series●Multi-contact Compact Circular Connectors
Jan.1.2021Copyright2021HIROSEELECTRICCO.,LTD.AllRightsReserved.
Contact
Male contact
Type Part No. HRS No. B C Applicable wire size
Loose piece
contacts
RM-PC-112 109-0668-7 1.6 2.0 20 to 24 AWG
RM-PC-122 109-0672-4 1.45 1.5 24 to 28 AWG
Reel
contacts
RM-PC-212 109-0670-9 1.6 2.0 20 to 24 AWG
RM-PC-222 109-0674-0 1.45 1.5 24 to 28 AWG
Female contact
Type Part No. HRS No. B C Applicable wire size
Loose piece
contacts
RM-SC-112 109-0669-0 1.6 2.0 20 to 24 AWG
RM-SC-122 109-0673-7 1.45 1.5 24 to 28 AWG
Reel
contacts
RM-SC-212 109-0671-1 1.6 2.0 20 to 24 AWG
RM-SC-222 109-0675-2 1.45 1.5 24 to 28 AWG
Note : Loose piece contacts are available in 100 pcs/pack. Reel contacts are available in 8,000 pcs/reel.
Applicable tools
Type Items Part No. HRS No. Applicable contact Applicable wire size
Manual Manual crimping
tool
HT802/RM-11 150-0401-6 RM-PC-112 20 to 24 AWG
RM-SC-112
HT802/RM-12 150-0402-9 RM-PC-122 24 to 28 AWG
RM-SC-122
Automatic
Automatic crimping
press CM-105C 901-0001-0 ---------------------- ----------------------
Applicator
AP-105-RM-1 901-2017-4 RM-PC-212 20 to 24 AWG
RM-SC-212
AP-105-RM-2 901-2018-7 RM-PC-222 24 to 28 AWG
RM-SC-222
Extraction tool RM-TP 150-0008-7 ---------------------- ----------------------
Manual crimping tool Contact extraction tool Automatic crimping
press (Type CM-105C)
A-A
Ａ
Ａ
Ｂ
Ｃ
16.7
1.4
A-A
Ａ
Ａ
17
1.4
Ｂ
Ｃ
How to use the RM15Q connectors (quick detachable type)
1. Insertion 2.Extraction
For smooth mating, while holding the plug tube, match the
guide of the receptacle with the key-way on the plug and
push straight it in as shown in the above fi gure.
To unmate, hold the locking sleeve and twist it approximately
30 degrees to the left, then pull it straight off as shown in the
above fi gure.
11
RM Series●Multi-contact Compact Circular Connectors
Jan.1.2021Copyright2021HIROSEELECTRICCO.,LTD.AllRightsReserved.
Remarks : Use a 0.5 ~ 2 mm thickness panel for all shell sizes.
Sign
Nut tightening Square fl ange
12 15 21 12
BRD QRD TRH · TRD TR BRB
ØA 14.1 17.1 22.1 14.5
B 6.1 7.6 ---------------------- ----------------------
C---------------------- ---------------------- ---------------------- 12.65 ----------------------
D---------------------- ---------------------- ---------------------- ---------------------- 1.6
ØE ---------------------- ---------------------- ---------------------- ---------------------- 2.9
Remarks : The dimensional tolerance to be +0.1 / 0.
Receptacle-recommended panel cut-out
For jam nut type For square flange type
Recommended panel cut-out for shell
sizes 12 and 15
Recommended panel cut-out for shell
sizes 21
Ｂ
ØＡ
1.6
Ｃ
ØＡ
Ｄ
Ｄ
4×ØＥ
ØＡ
Mounting method
Locking mechanism
Shell size
Contact Position Arrangement and Specifications
Shell size : 12 Shell size : 15
Contact
arrangement
21
2
13
23
41
3
42
1
5
7
52
6
4
1
3
12
32
14
No. of contacts 2 3 4 5 7 2 4
Withstanding
voltage AC 1,800V for
one minute AC 1,500V for one minute AC 1,000V for one minute AC 1,800V for
one minute AC 1,500V for
one minute
Rated current 5A 10A
Insulation
resistance 1,000Mø min. 1,000Mø min.
Contact
resistance 4mø max. 2mø max.
Inner diameter
of solder pot Ø1.1mm Ø1.7mm
Shell size : 15 Shell size : 21
Contact
arrangement 12
11
7
9
54
2
8
6
10
3
1
15
14 13
10
9
8
765
4
3
2
11
12
1
12
15
16
17 18
19
1
2
3
4
5
14
6
7
8
9
10
20 13
11 15
14 13
10
9
8
765
4
3
2
11
12
1
12
15
16
17 18
19
1
2
3
4
5
14
6
7
8
9
10
20 13
11
No. of contacts 8 10 12 15 20
Withstanding
voltage AC 1,500V for
one minute AC 1,000V for one minute AC 1,500V for
one minute AC 1,000V for
one minute
Rated current 5A 5A
Insulation
resistance 1,000Mø min. 1,000Mø min.
Contact
resistance 4mø max. 4mø max.
Inner diameter
of solder pot Ø1.1mm Ø1.1mm
Remarks
1. The above figures show contact arrangements viewed from the mating end of the connectors with female contacts.
2. The "▼" marks shown in the above figures represent the position of the receptacle mating guide.
3. Withstanding voltages are shown as test voltages.
12
RM Series●Multi-contact Compact Circular Connectors
Jan.1.2021Copyright2021HIROSEELECTRICCO.,LTD.AllRightsReserved.
Precautions
1. Be sure the power is off before mating/unmating a connector.
2. Be sure to use a connector with female contacts for the power side of the circuit.
3. Be sure to engage the lock mechanism on the connectors.
4.
Regarding plugs and jacks : the forces from cable clamping, cable rotation, and other forces may vary with the cable
construction. Please make sure that your cable is suitable for use with these connectors before usage and production.
5. This product series uses silver plated contacts. Silver reacts easily to exposure to sulfur gas so the below conditions may
cause tarnishing.
・Dusty environments
・Area with a high concentration area of gases such as sulfur dioxide gas, hydrogen sulfide gas, nitrogen dioxide gas
and so on.
Example; In close proximity to factory exhaust, automotive emissions, etc.
・Close to heaters, or in other areas marked by extreme temperature differences or high humidity.
・Close to rubber products includes rubber adhesives.
The Electrical connection is not affected by tarnishing on a silver surface due to the wiping effect of the contact pins.
Storage
Packing state; Packed in original packing or equivalent container
Temperature -10 to +60°C
Humidity 85% Max
(It is recommended that the product be stored in an area of normal level of temperature and humidity, and free of any
temperature fluctuation)
Please use this products within 6 months of delivery.
(After 6 month, please check the solderbility before use)
“Storage” means long-term storage of the unused products in sealed packaging, prior to assembly to PCB.
The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use.
The contents of this catalog are current as of date of 07/2018. Contents are subject to change without notice for the purpose of improvements.
2-6-3,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN
TEL: +81-45-620-3526 Fax: +81-45-591-3726
http://www.hirose.com
http://www.hirose-connectors.com
®
13
RM Series●Multi-contact Compact Circular Connectors
Jan.1.2021Copyright2021HIROSEELECTRICCO.,LTD.AllRightsReserved.
