02/11/2015 www.crouzet.com 80 and 100 W - 10 Nm - Right-angle gearbox 801810 TNi20 - PWM Part number Contact us With or without integrated control electronics Output perpendicular to motor Ideal for short reduction ratios Ideal for very compact applications Silent operation Non-reversible movement at high ratios Part numbers With built-in electronic control Without built-in control, with Hall effect sensors Ratios (i) Output speed (rpm) 24 V DC Available torque (Nm) Type 80181004 801810 TNi20 - PWM TNi20 - 30 108 Specifications General characteristics Motor Nominal motor power at 24 V (W) Speed control Axial load dynamic (N) Radial load dynamic (N) Temperature rise at 50 % cycle (C) Weight (g) Protection index 801800 80 PWM 100 150 45 1920 IP54 Dimensions (mm) 801810 with built-in TNi20 No Legend 4 x M5 over depth 8 mm Length of cable 500 5 mm 4 x M4 over O 36 depth 8 mm 4 x M5 depth 8 mm Precautions for use The limits and precautions for use described in the 80 W brushless motor section must be observed. Continuous use may cause the gearbox to overheat. This geared motor is recommended for applications in which the operating time does not exceed 50 % of the total time. For longer times, please consult us. Product adaptations Unless otherwise specified, the characteristics given are applicable to all or part of the product range selected 3,5 02/11/2015 www.crouzet.com 2-quadrant speed regulation With built-in electronic card TNi20 No lead output but connector in motor Dimensions of gearbox shaft Cable length, with or without connector Other reduction ratios Other windings Mechanical holding brake Unless otherwise specified, the characteristics given are applicable to all or part of the product range selected