Product data sheet
Characteristics
ZB5AG310
selector switch head Ø22 3-position stay put
Ronis 458A
Product availability : Non-Stock - Not normally stocked in distribution facility
Price* : 87.00 USD
Main
Range of product Harmony XB5
Product or component type Head for key selector switch
Device short name ZB5
Bezel material Dark grey plastic
Mounting diameter 0.87in (22mm)
Head type Standard
Sale per indivisible quantity 1
Shape of signaling unit head Round
Type of operator stay put
Operator profile Black key switch
Operator position information 3 positions +/- 45°
Type of keylock Ronis 458A
Key withdrawal position Center
Complementary
CAD overall width 1.14in (29mm)
CAD overall height 1.14in (29mm)
CAD overall depth 2.83in (72mm)
Net Weight 0.13lb(US) (0.057kg)
Mechanical durability 1000000cycles
Station name XALD 1...5 cut-outs
XALK 2...5 cut-outs
Electrical composition code C4 6 single and double front mounting
C5 5 single front mounting
C6 5 single and double front mounting
C7 4 single front mounting
Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications
*Price is “List Price” and may be subject to a trade discount – check with your local distributor or retailer for actual price.
Oct 12, 2020
1
C8 4 single and double front mounting
C11 3 single front mounting
C3 6 single front mounting
SF1 3 single front mounting
SR1 3 single rear mounting
Device presentation Basic element
Environment
Protective treatment TH
Ambient air temperature for storage -40…158°F (-40…70°C)
Ambient air temperature for operation -40…158°F (-40…70°C)
Overvoltage category Class II IEC 60536
IP degree of protection IP66 IEC 60529
IP67
IP69
IP69K
NEMA degree of protection NEMA 13
NEMA 4X
Resistance to high pressure washer 1015.26psi (7000000Pa) 131°F (55°C) 0.1 m
IK degree of protection IK06 IEC 50102
Standards UL 508
EN/IEC 60947-5-4
JIS C8201-5-1
EN/IEC 60947-1
EN/IEC 60947-5-1
CSA C22.2 No 14
JIS C8201-1
Product certifications RINA
LROS (Lloyds register of shipping)
UL Listed
CSA
GL
BV
DNV
Vibration resistance 5 gn 2…500Hz)IEC 60068-2-6
Shock resistance 30 gn 18ms) half sine wave acceleration IEC 60068-2-27
50 gn 11ms) half sine wave acceleration IEC 60068-2-27
Ordering and shipping details
Category 22467 - PUSHBUTTONS,22MM(PLASTIC) NEW
Discount Schedule CS2
GTIN 00785901949411
Returnability No
Country of origin FR
Offer Sustainability
Sustainable offer status Green Premium product
California proposition 65 WARNING: This product can expose you to chemicals including: Lead and lead compounds, which
is known to the State of California to cause cancer and birth defects or other reproductive harm. For
more information go to www.P65Warnings.ca.gov
REACh Regulation REACh Declaration
EU RoHS Directive Pro-active compliance (Product out of EU RoHS legal scope)
EU RoHS Declaration
Mercury free Yes
RoHS exemption information Yes
China RoHS Regulation China RoHS declaration
Environmental Disclosure Product Environmental Profile
Circularity Profile End of Life Information
2
Contractual warranty
Warranty 18 months
3
Product data sheet
Dimensions Drawings
ZB5AG310
Dimensions
4
Product data sheet
Mounting and Clearance
ZB5AG310
Panel Cut-out for Pushbuttons, Switches and Pilot Lights (Finished Holes, Ready for Installation)
Connection by Screw Clamp Terminals or Plug-in Connectors or on Printed Circuit Board
(1) Diameter on finished panel or support
(2) For selector switches and Emergency stop buttons, use of an anti-rotation plate type ZB5AZ902 is recommended.
(3) Ø22.5mm recommended (Ø22.3 0 +0.4) / Ø0.89in. recommended (Ø0.88in. 0 +0.016)
Connections a in mm a in in. b in mm b in in.
By screw clamp terminals or plug-in connector 40 1.57 30 1.18
By Faston connectors 45 1.77 32 1.26
On printed circuit board 30 1.18 30 1.18
Detail of Lug Recess
(1) Diameter on finished panel or support
(2) For selector switches and Emergency stop buttons, use of an anti-rotation plate type ZB5AZ902 is recommended.
(3) Ø22.5mm recommended (Ø22.3 0 +0.4) / Ø0.89in. recommended (Ø0.88in. 0 +0.016)
5
Product data sheet
Mounting and Clearance
ZB5AG310
Pushbuttons, Switches and Pilot Lights for Printed Circuit Board Connection
Panel Cut-outs (Viewed from Installer’s Side)
A: 30mm min. / 1.18in. min.
B: 40mm min. / 1.57in. min.
Printed Circuit Board Cut-outs (Viewed from Electrical Block Side)
Dimensions in mm
A: 30mm min.
B: 40mm min.
6
Dimensions in in.
A: 1.18in. min.
B: 1.57in. min.
General Tolerances of the Panel and Printed Circuit Board
The cumulative tolerance must not exceed 0.3mm / 0.012in.: T1 + T2 = 0.3mm max.
Installation Precautions
● Minimum thickness of circuit board: 1.6mm / 0.06in.
● Cut-out diameter: 22.4mm ± 0.1 / 0.88in. ± 0.004
●Orientation of body/fixing collar ZB5AZ009: ± 2°30’ (excluding cut-outs marked a and b).
● Tightening torque of screws ZBZ006: 0.6N.m (5.3lbf.in) max.
● Allow for one ZB5AZ079 fixing collar/pillar and its fixing screws:
○ every 90mm / 3.54in. horizontally (X), and 120mm / 4.72in. vertically (Y).
○ with each selector switch head (ZB5AD•, ZB5AJ•, ZB5AG•).
The fixing centers marked a and b are diagonally opposed and must align with those marked 4 and 5.
(1) Head ZB5AD•
(2) Panel
(2) Nut
(4) Printed circuit board
7
Mounting of Adapter (Socket) ZBZ01•
● 1 2 elongated holes for ZBZ006 screw access
● 2 1 hole Ø 2.4mm ± 0.05 / 0.09in. ± 0.002 for centring adapter ZBZ01•
● 3 8 × Ø 1.2mm / 0.05in. holes
● 4 1 hole Ø 2.9mm ± 0.05 / 0.11in. ± 0.002, for aligning the printed circuit board (with cut-out marked a)
● 5 1 elongated hole for aligning the printed circuit board (with cut-out marked b)
● 6 4 holes Ø 2.4mm / 0.09in. for clipping in adapter ZBZ01•
Dimensions An + 18.1 relate to the Ø 2.4mm ± 0.05 / 0.09in. ± 0.002 holes for centring adapter ZBZ01•.
8
Product data sheet
Technical Description
ZB5AG310
Electrical Composition Corresponding to Code C4
9
Product data sheet
Technical Description
ZB5AG310
Electrical Composition Corresponding to Code C5
10
Product data sheet
Technical Description
ZB5AG310
Electrical Composition Corresponding to Code C6
11
Product data sheet
Technical Description
ZB5AG310
Electrical Composition Corresponding to Code C7
12
Product data sheet
Technical Description
ZB5AG310
Electrical Composition Corresponding to Code C8
13
Product data sheet
Technical Description
ZB5AG310
Electrical Composition Corresponding to Code C3
14
Product data sheet
Technical Description
ZB5AG310
Electrical Composition Corresponding to Codes C9, C11, SF1 and SR1
15
Product data sheet
Technical Description
ZB5AG310
Legend
Single contact
Double contact
Light block
Possible location
16
Product data sheet
Technical Description
ZB5AG310
Sequence of Contacts Fitted to 3-position Selector Switch Body
Position 315°
TopPosition
Bottom
Location Left Centre Right
Push
State 1 1 0
N/O closed closed openContacts
N/C open open closed
Position 0°
TopPosition
Bottom
Location Left Centre Right
Push
State 0 0 0
N/O open open openContacts
N/C closed closed closed
Position 45°
TopPosition
Bottom
Location Left Centre Right
Push
State 0 1 1
N/O open closed closedContacts
N/C closed open open
17