Document 438-1 Shielded Power Inductors - LPS3008 * Very low DCR; excellent current handling * Only 0.8 mm tall; 3.0 x 3.0 mm footprint Core material Ferrite Core and winding loss See www.coilcraft.com/coreloss Terminations RoHS compliant silver-palladium-platinum-glass frit. Other terminations available at additional cost. Weight 22 - 25 mg Ambient temperature -40C to +85C with Irms current, +85C to +125C with derated current Storage temperature Component: -40C to +125C. Tape and reel packaging: -40C to +80C Resistance to soldering heat Max three 40 second reflows at +260C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 Packaging 1000/7 reel; 3500/13 reel; Plastic tape: 12 mm wide, 0.23 mm thick, 8 mm pocket spacing, 1.37 mm pocket depth (Refer to dimensional drawing for part orientation in tape.) Recommended pick and place nozzle OD: 3 mm; ID: 1.5 mm PCB washing Tested with pure water or alcohol only. For other solvents, see Doc787_PCB_Washing.pdf. Isat (A)5Irms (A)6 DCR SRF 2 3 4 Inductance max typ 10% 20% 30% 20C 40C Part number1 20% (H) (Ohms) (MHz) drop drop drop rise rise LPS3008-561ML_ LPS3008-801ML_ LPS3008-102ML_ LPS3008-152ML_ LPS3008-222ML_ 0.56 0.80 1.0 1.5 2.2 0.072 0.092 0.125 0.134 0.175 330 255 220 170 150 1.8 1.6 1.3 1.1 1.0 2.0 1.7 1.4 1.3 1.1 2.1 1.8 1.5 1.3 1.1 1.4 1.1 0.90 0.87 0.85 2.0 1.6 1.3 1.2 1.1 LPS3008-332ML_ LPS3008-472ML_ LPS3008-562ML_ LPS3008-682ML_ LPS3008-822ML_ 3.3 4.7 5.6 6.8 8.2 0.285 0.350 0.450 0.500 0.600 114 87 78 75 61 0.81 0.68 0.62 0.58 0.52 0.86 0.73 0.67 0.61 0.56 0.88 0.74 0.70 0.63 0.58 0.74 0.68 0.58 0.50 0.45 0.95 0.80 0.73 0.67 0.60 LPS3008-103ML_ LPS3008-123ML_ LPS3008-183ML_ LPS3008-223ML_ LPS3008-333ML_ 10 12 18 22 33 0.650 0.790 1.25 1.50 2.30 56 49 38 35 23 0.46 0.45 0.35 0.29 0.27 0.51 0.48 0.38 0.33 0.30 0.52 0.50 0.40 0.34 0.31 0.42 0.38 0.33 0.29 0.25 0.56 0.50 0.44 0.38 0.32 LPS3008-473ML_ LPS3008-683ML_ LPS3008-104ML_ LPS3008-124ML_ LPS3008-154ML_ 47 68 100 120 150 3.00 4.75 6.85 7.00 8.00 21 18 14 13 11 0.22 0.18 0.15 0.084 0.080 0.23 0.19 0.16 0.094 0.088 0.24 0.20 0.16 0.10 0.092 0.21 0.175 0.160 0.140 0.130 0.27 0.23 0.21 0.190 0.175 LPS3008-184ML_ LPS3008-224ML_ LPS3008-334ML_ 180 220 330 9.00 11.5 18.0 10 9 7 0.070 0.078 0.082 0.120 0.160 0.067 0.073 0.076 0.100 0.145 0.059 0.064 0.066 0.090 0.130 * Coilcraft Designer's Kit C392 contains samples of 0.80 H to 33 H parts (3 each) from LPS3008, LPS3010 and LPS3015. Kit C401 contains samples of 0.56 H to 33 H parts (3 each) from LPS4012 and LPS4018. Kit C402 contains samples of 220 H to 3300 H parts (3 each) from all five series. For details of kit contents and to order, contact Coilcraft or visit http://order.coilcraft.com. 1. Please specify termination and packaging codes: LPS3008-104MLC Termination: L = RoHS compliant silver-palladiumplatinum-glass frit. Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). Packaging: C = 7 machine-ready reel. EIA-481 embossed plastic tape (1000 parts per full reel). B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead. D = 13 machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (3500 parts per full reel). 2. Inductance tested at 100 kHz, 0.1 Vrms using an Agilent/HP 4192A. Inductance at 1 MHz is the same for parts with SRF 10 MHz. 3. DCR measured on a micro-ohmmeter. 4. SRF measured using an Agilent/HP 8753ES or equivalent. 5. DC current that causes the specified inductance drop from its value without current. 6. Current that causes the specified temperature rise from 25C ambient. 7. Electrical specifications at 25C. Refer to Doc 362 "Soldering Surface Mount Components" before soldering. US +1-847-639-6400 sales@coilcraft.com UK +44-1236-730595 sales@coilcraft-europe.com Taiwan +886-2-2264 3646 sales@coilcraft.com.tw China +86-21-6218 8074 sales@coilcraft.com.cn Singapore + 65-6484 8412 sales@coilcraft.com.sg Document 438-1 Revised 09/16/13 (c) Coilcraft Inc. 2013 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. Document 438-2 Shielded Power Inductors - LPS3008 Series Typical L vs Current Typical L vs Frequency 1000 1000 330 H 100 100 H Inductance (H) Inductance (H) 330 H 33 H 10 10 H 3.3 H 1 0.1 1 0.1 33 H 10 H 10 3.3 H 1.0 H 1 1.0 H 0.01 100 H 100 10 0.1 0.01 1 0.1 Current (A) 10 Frequency (MHz) Current Derating 0.116 0.003* 2,95 0,076 120 100 90 XXX X 80 0.116 0.003* 2,95 0,076 Winding direction 70 Dash number 60 Internal code 50 40 30 20 Isat Irms 10 0 -40 -20 0 0.0315 max * 0,8 25C Percent of rated Current 110 20 Recommended Land Pattern 0.045 0.040 1,14 1,02 40 60 80 100 120 140 Ambient temperature (C) 0.120 0.100 0.040 3,05 2,54 1,02 0.0275 0,70 0.070 1,78 0.035 0,89 0.110 2,79 are of the case not including * Dimensions the termination. For maximum overall dimensions including the termination, add 0.005 in / 0,13 mm. For optional tin-lead and tin-silver-copper terminations, dimensions are for the mounted part. Dimensions before mounting can be an additional 0.005 inch / 0,13 mm). US +1-847-639-6400 sales@coilcraft.com UK +44-1236-730595 sales@coilcraft-europe.com Taiwan +886-2-2264 3646 sales@coilcraft.com.tw China +86-21-6218 8074 sales@coilcraft.com.cn Singapore + 65-6484 8412 sales@coilcraft.com.sg 0.130 3,30 Dimensions are in Document 438-2 inches mm Revised 09/06/13 (c) Coilcraft Inc. 2013 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information.