US
UK
Taiwan
China
Singapore
+1-847-639-6400 sales@coilcraft.com
+44-1236-730595 sales@coilcraft-europe.com
+886-2-2264 3646 sales@coilcraft.com.tw
+86-21-6218 8074 sales@coilcraft.com.cn
+ 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft appr
oval.
Specification subject to change without notice.
Please check web site for latest infor
mation.
Shielded Power Inductors
LPS3008
Document 438-1
Document 438-1 Revised 09/16/13
DCR SRF Isat (A)5 Irms (A)6
Inductance2 max3 typ4 10% 20% 30% 20°C 40°C
Part number1 ±20% (µH) (Ohms) (MHz) drop drop drop rise rise
LPS3008-561ML_ 0.56 0.072 330 1.8 2.0 2.1 1.4 2.0
LPS3008-801ML_ 0.80 0.092 255 1.6 1.7 1.8 1.1 1.6
LPS3008-102ML_ 1.0 0.125 220 1.3 1.4 1.5 0.90 1.3
LPS3008-152ML_ 1.5 0.134 170 1.1 1.3 1.3 0.87 1.2
LPS3008-222ML_ 2.2 0.175 150 1.0 1.1 1.1 0.85 1.1
LPS3008-332ML_ 3.3 0.285 114 0.81 0.86 0.88 0.74 0.95
LPS3008-472ML_ 4.7 0.350 87 0.68 0.73 0.74 0.68 0.80
LPS3008-562ML_ 5.6 0.450 78 0.62 0.67 0.70 0.58 0.73
LPS3008-682ML_ 6.8 0.500 75 0.58 0.61 0.63 0.50 0.67
LPS3008-822ML_ 8.2 0.600 61 0.52 0.56 0.58 0.45 0.60
LPS3008-103ML_ 10 0.650 56 0.46 0.51 0.52 0.42 0.56
LPS3008-123ML_ 12 0.790 49 0.45 0.48 0.50 0.38 0.50
LPS3008-183ML_ 18 1.25 38 0.35 0.38 0.40 0.33 0.44
LPS3008-223ML_ 22 1.50 35 0.29 0.33 0.34 0.29 0.38
LPS3008-333ML_ 33 2.30 23 0.27 0.30 0.31 0.25 0.32
LPS3008-473ML_ 47 3.00 21 0.22 0.23 0.24 0.21 0.27
LPS3008-683ML_ 68 4.75 18 0.18 0.19 0.20 0.175 0.23
LPS3008-104ML_ 100 6.85 14 0.15 0.16 0.16 0.160 0.21
LPS3008-124ML_ 120 7.00 13 0.084 0.094 0.10 0.140 0.190
LPS3008-154ML_ 150 8.00 11 0.080 0.088 0.092 0.130 0.175
LPS3008-184ML_ 180 9.00 10 0.070 0.078 0.082 0.120 0.160
LPS3008-224ML_ 220 11.5 9 0.067 0.073 0.076 0.100 0.145
LPS3008-334ML_ 330 18.0 7 0.059 0.064 0.066 0.090 0.130
1. Please specify termination and packaging codes:
LPS3008-104MLC
Termination: L = RoHS compliant silver-palladium-
platinum-glass frit.
Special order:
T = RoHS tin-silver-copper (95.5/4/0.5)
or S = non-RoHS tin-lead (63/37).
Special order:
T = RoHS tin-silver-copper (95.5/4/0.5)
or S = non-RoHS tin-lead (63/37).
Packaging: C = 7 machine-ready reel. EIA-481
embossed plastic tape (1000 parts
per full reel).
B = Less than full reel. In tape, but not
machine ready. To have a leader
and trailer added ($25 charge), use
code letter C instead.
D = 13 machine-ready reel. EIA-481
embossed plastic tape. Factory
order only, not stocked (3500 parts
per full reel).
2. Inductance tested at 100 kHz, 0.1 Vrms using an
Agilent/HP 4192A. Inductance at 1 MHz is the same
for parts with SRF 10 MHz.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using an Agilent/HP 8753ES or
equivalent.
5. DC current that causes the specified inductance drop
from its value without current.
6. Current that causes the specified temperature rise
from 25°C ambient.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components”
before soldering.
Core material Ferrite
Core and winding loss See www.coilcraft.com/coreloss
Terminations RoHS compliant silver-palladium-platinum-glass frit.
Other terminations available at additional cost.
Weight 22 – 25 mg
Ambient temperature –40°C to +85°C with Irms current, +85°C to
+125°C with derated current
Storage temperature Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 1000/7 reel; 3500/13 reel; Plastic tape: 12 mm wide,
0.23 mm thick, 8 mm pocket spacing, 1.37 mm pocket depth
(Refer to dimensional drawing for part orientation in tape.)
Recommended pick and place nozzle OD: 3 mm; ID: 1.5 mm
PCB washing Tested with pure water or alcohol only. For other solvents,
see Doc787_PCB_Washing.pdf.
Very low DCR; excellent current handling
Only 0.8 mm tall; 3.0 × 3.0 mm footprint
Coilcraft Designer’s Kit C392 contains samples of 0.80 µH to 33 µH parts (3 each)
from LPS3008, LPS3010 and LPS3015. Kit C401 contains samples of 0.56 µH to
33 µH parts (3 each) from LPS4012 and LPS4018. Kit C402 contains samples of
220 µH to 3300 µH parts (3 each) from all five series. For details of kit contents and
to order, contact Coilcraft or visit http://order.coilcraft.com.
US
UK
Taiwan
China
Singapore
+1-847-639-6400 sales@coilcraft.com
+44-1236-730595 sales@coilcraft-europe.com
+886-2-2264 3646 sales@coilcraft.com.tw
+86-21-6218 8074 sales@coilcraft.com.cn
+ 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft appr
oval.
Specification subject to change without notice.
Please check web site for latest infor
mation.
Shielded Power Inductors
LPS3008 Series
Document 438-2
Document 438-2 Revised 09/06/13
Typical L vs Current
0.1
1
10
100
1000
0.01 0.1 101
Current (A)
Inductance (µH)
330 µH
33 µH
10 µH
100 µH
1.0 µH
3.3 µH
Typical L vs Frequency
0.1
1
10
100
1000
0.01 0.1 101
Frequency (MHz)
Inductance (µH)
330 µH
33 µH
10 µH
100 µH
1.0 µH
3.3 µH
-40 -20 020406080100
140
120
Ambient temperature (°C)
120
110
100
90
80
70
60
50
40
30
20
10
0
25°C
Percent of rated Current
Isat
Irms
Current Derating
Dimensions are in inches
mm
0.116 ±0.003
2,95 ±0,076
0.116 ±0.003
2,95 ±0,076
0.035
0,89
Winding
direction
0.0315
0,8 max
*
*
0.120
3,05
0.100
2,54
0.040
1,02
0.0275
0,70
0.045
1,14
0.130
3,30
0.110
2,79
0.070
1,78
0.040
1,02
Recommended
Land Pattern
Dash
number Internal
code
XXX X
*
Dimensions are of the case not including
the termination. For maximum overall
dimensions including the termination, add
0.005 in/0,13 mm.
For optional tin-lead and tin-silver-copper
terminations, dimensions are for the
mounted part. Dimensions before mounting
can be an additional 0.005 inch/0,13 mm).
*