TH09/2479 TH97/2478 P6KE SERIES IATF 0113686 SGS TH07/1033 TRANSIENT VOLTAGE SUPPRESSOR DO-15 VBR : 6.8 - 600 Volts PPK : 600 Watts 1.00 (25.4) MIN. 0.142 (3.6) 0.102 (2.6) FEATURES : * * * * * Glass passivated jungtion chip 600W surge capability at 1ms Excellent clamping capability Low zener impedance Fast response time : typically less then 1.0 ps from 0 volt to VBR(min.) * Typical IR less then 1A above 10V * Pb / RoHS Free 0.300 (7.6) 0.230 (5.8) 1.00 (25.4) MIN. 0.034 (0.86) 0.028 (0.71) MECHANICAL DATA : Dimensions in inches and ( millimeters ) * Case : DO-15 Molded plastic * Epoxy : UL94V-0 rate flame retardant * Lead : Axial lead solderable per MIL-STD-202, Method 208 guaranteed * Polarity : Color band denotes cathode end * Mounting position : Any * Weight : 0.4 gram DEVICES FOR BIPOLAR APPLICATIONS For Bi-directional use C or CA Suffix Electrical characteristics apply in both directions MAXIMUM RATINGS Rating at 25 C ambient temperature unless otherwise specified. Rating Peak Power Dissipation at Ta = 25 C, Tp=1ms (Note1) Steady State Power Dissipation at TL = 75 C Lead Lengths 0.375", (9.5mm) (Note 2) Symbol Value Unit PPK Minimum 600 W PD 5.0 W IFSM 100 A TJ, TSTG - 65 to + 175 C Peak Forward Surge Current, 8.3ms Single Half Sine-Wave Superimposed on Rated Load (JEDEC Method) (Note 3) Unidirectional only Operating and Storage Temperature Range Notes : (1) Non-repetitive Current pulse, per Fig. 5 and derated above Ta = 25 C per Fig. 1 (2) Mounted on Copper Leaf area of 1.57 in2 (40mm2). (3) 8.3 ms single half sine-wave, duty cycle = 4 pulses per minutes maximum and VB >220V, IFSM is 50 A. Page 1 of 4 Rev. 07 : February 23, 2011 TH97/2478 ELECTRICAL CHARACTERISTICS Breakdown Voltage @ It ( Note 1 ) Type No. VBR (V) P6KE6.8 P6KE6.8A P6KE7.5 P6KE7.5A P6KE8.2 P6KE8.2A P6KE8.5 P6KE8.5A P6KE9.1 P6KE9.1A P6KE10 P6KE10A P6KE11 P6KE11A P6KE12 P6KE12A P6KE13 P6KE13A P6KE15 P6KE15A P6KE16 P6KE16A P6KE18 P6KE18A P6KE20 P6KE20A P6KE22 P6KE22A P6KE24 P6KE24A P6KE27 P6KE27A P6KE28 P6KE28A P6KE30 P6KE30A P6KE33 P6KE33A P6KE36 P6KE36A P6KE39 P6KE39A P6KE43 P6KE43A P6KE47 P6KE47A P6KE51 P6KE51A P6KE56 P6KE56A P6KE62 P6KE62A P6KE68 P6KE68A Page 2 of 4 Min. 6.12 6.45 6.75 7.13 7.38 7.79 7.65 8.08 8.19 8.65 9.00 9.50 9.90 10.5 10.8 11.4 11.7 12.4 13.5 14.3 14.4 15.2 16.2 17.1 18.0 19.0 19.8 20.9 21.6 22.8 24.3 25.7 25.2 26.6 27.0 28.5 29.7 31.4 32.4 34.2 35.1 37.1 38.7 40.9 42.3 44.7 45.9 48.5 50.4 53.2 55.8 58.9 61.2 64.6 Max. 7.48 7.14 8.25 7.88 9.02 8.61 9.35 8.93 10.0 9.55 11.0 10.5 12.1 11.6 13.2 12.6 14.3 13.7 16.5 15.8 17.6 16.8 19.8 18.9 22.0 21.0 24.2 23.1 26.4 25.2 29.7 28.4 30.8 29.4 33.0 31.5 36.3 34.7 39.6 37.8 42.9 41.0 47.3 45.2 51.7 49.4 56.1 53.6 61.6 58.8 68.2 65.1 74.8 71.4 It (mA) 10 10 10 10 10 10 10 10 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 TH09/2479 IATF 0113686 SGS TH07/1033 ( Rating at 25 C ambient temperature unless otherwise specified.) Working Peak Reverse Voltage VRWM (V) 5.50 5.80 6.05 6.40 6.63 7.02 6.89 7.27 7.37 7.78 8.10 8.55 8.92 9.40 9.72 10.2 10.5 11.1 12.1 12.8 12.9 13.6 14.5 15.3 16.2 17.1 17.8 18.8 19.4 20.5 21.8 23.1 22.7 23.9 24.3 25.6 26.8 28.2 29.1 30.8 31.6 33.3 34.8 36.8 38.1 40.2 41.3 43.6 45.4 47.8 50.2 53.0 55.1 58.1 Maximum Reverse Leakage @ VRWM IR (A) 1000 1000 500 500 200 200 200 200 150 150 150 150 150 150 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 Maximum Reverse Current IRSM (A) 55.5 57.0 51.0 53.0 48.0 50.0 46.0 47.0 44.0 45.0 40.0 41.0 37.0 38.0 35.0 36.0 32.0 33.0 27.0 28.0 26.0 27.0 23.0 24.0 21.0 22.0 19.0 20.0 17.0 18.0 15.0 16.0 15.0 15.5 14.0 14.4 12.6 13.2 11.6 12.0 10.6 11.2 9.6 10.1 8.9 9.3 8.2 8.6 7.4 7.8 6.8 7.1 6.1 6.5 Maximum Clamping Voltage @ IRSM VRSM (V) 10.8 10.5 11.7 11.3 12.5 12.1 13.0 12.7 13.8 13.4 15.0 14.5 16.2 15.6 17.3 16.7 19.0 18.2 22.0 21.2 23.5 22.5 26.5 25.2 29.1 27.7 31.9 30.6 34.7 33.2 39.1 37.5 40 38.7 43.5 41.4 47.7 45.7 52.0 49.9 56.4 53.9 61.9 59.3 67.8 64.8 73.5 70.1 80.5 77.0 89.0 85.0 98.0 92.0 Maximum Temperature Co-efficient of VBR (% / C) 0.057 0.057 0.061 0.061 0.065 0.065 0.067 0.067 0.068 0.068 0.073 0.073 0.075 0.075 0.078 0.078 0.081 0.081 0.084 0.084 0.086 0.086 0.088 0.088 0.090 0.090 0.092 0.092 0.094 0.094 0.096 0.096 0.096 0.096 0.097 0.097 0.098 0.098 0.099 0.099 0.100 0.100 0.101 0.101 0.101 0.101 0.102 0.102 0.103 0.103 0.104 0.104 0.104 0.104 Rev. 07 : February 23, 2011 TH97/2478 ELECTRICAL CHARACTERISTICS TH09/2479 IATF 0113686 SGS TH07/1033 ( Rating at 25 C ambient temperature unless otherwise specified.) Breakdown Voltage @ It ( Note 1 ) Working Peak Maximum Maximum Maximum Maximum Reverse Reverse Leakage Reverse Clamping Temperature Type No. Current Voltage @ IRSM Co-efficient Voltage @ VRWM It VRWM IR IRSM VRSM of VBR VBR (V) Min. Max. (mA) (V) (A) (A) (V) (% / C) P6KE75 67.5 82.5 1.0 60.7 5.0 5.5 108 0.105 P6KE75A 71.3 78.8 1.0 64.1 5.0 5.8 103 0.105 P6KE82 73.8 90.2 1.0 66.4 5.0 5.1 118 0.105 P6KE82A 77.9 86.1 1.0 70.1 5.0 5.3 113 0.105 P6KE91 81.9 100.0 1.0 73.7 5.0 4.5 131 0.106 P6KE91A 86.5 95.5 1.0 77.8 5.0 4.8 125 0.106 P6KE100 90.0 110.0 1.0 81.0 5.0 4.2 144 0.106 P6KE100A 95.0 105.0 1.0 85.5 5.0 4.4 137 0.106 P6KE110 99.0 121.0 1.0 89.2 5.0 3.8 158 0.107 P6KE110A 105.0 116.0 1.0 94.0 5.0 4.0 152 0.107 P6KE120 108.0 132.0 1.0 97.2 5.0 3.5 173 0.107 P6KE120A 114.0 126.0 1.0 102 5.0 3.6 165 0.107 P6KE130 117.0 143.0 1.0 106 5.0 3.2 187 0.107 P6KE130A 124.0 137.0 1.0 111 5.0 3.3 179 0.107 P6KE150 135.0 165.0 1.0 121 5.0 2.8 215 0.108 P6KE150A 143.0 158.0 1.0 128 5.0 2.9 207 0.108 P6KE160 144.0 176.0 1.0 130 5.0 2.6 230 0.108 P6KE160A 152.0 168.0 1.0 136 5.0 2.7 219 0.108 P6KE170 153.0 187.0 1.0 138 5.0 2.5 244 0.108 P6KE170A 162.0 179.0 1.0 145 5.0 2.6 234 0.108 P6KE180 162.0 198.0 1.0 146 5.0 2.3 258 0.108 P6KE180A 171.0 189.0 1.0 154 5.0 2.4 246 0.108 P6KE200 180.0 220.0 1.0 162 5.0 2.1 287 0.108 P6KE200A 190.0 210.0 1.0 171 5.0 2.2 274 0.108 P6KE220 198.0 242.0 1.0 175 5.0 1.75 344 0.108 P6KE220A 209.0 231.0 1.0 185 5.0 1.83 328 0.108 P6KE250 225.0 275.0 1.0 202 5.0 1.67 360 0.110 P6KE250A 237.0 263.0 1.0 214 5.0 1.75 344 0.110 P6KE300 270.0 330.0 1.0 243 5.0 1.40 430 0.110 P6KE300A 285.0 315.0 1.0 256 5.0 1.45 414 0.110 P6KE320 288.0 352.0 1.0 259 5.0 1.31 460 0.110 P6KE320A 303.0 337.0 1.0 272 5.0 1.35 445 0.110 P6KE350 315.0 385.0 1.0 284 5.0 1.20 504 0.110 P6KE350A 332.0 368.0 1.0 300 5.0 1.25 482 0.110 P6KE400 360.0 440.0 1.0 324 5.0 1.05 574 0.110 P6KE400A 380.0 420.0 1.0 342 5.0 1.10 548 0.110 P6KE440 396.0 484.0 1.0 356 5.0 0.95 631 0.110 P6KE440A 418.0 462.0 1.0 376 5.0 1.00 602 0.110 P6KE480 432.0 528.0 1.0 389 5.0 0.88 686 0.110 P6KE480A 456.0 504.0 1.0 408 5.0 0.90 658 0.110 P6KE510 459.0 561.0 1.0 413 5.0 0.82 729 0.110 P6KE510A 485.0 535.0 1.0 434 5.0 0.86 698 0.110 P6KE530 477.0 583.0 1.0 457 5.0 0.76 798 0.110 P6KE530A 503.5 556.5 1.0 477 5.0 0.80 725 0.110 P6KE540 486.0 594.0 1.0 437 5.0 0.78 772 0.110 P6KE540A 513.0 567.0 1.0 459 5.0 0.81 740 0.110 P6KE550 495.0 605.0 1.0 470 5.0 0.76 836 0.110 P6KE550A 522.5 577.5 1.0 495 5.0 0.80 760 0.110 P6KE600 540.0 660.0 1.0 490 5.0 0.71 911 0.110 P6KE600A 570.0 630.0 1.0 512 5.0 0.75 828 0.110 Notes : ( 1 ) VBR measured after It applied for 300 s., It = square wave pulse or equivalent. ( 2 ) VF = 3.5 Vmax., IF = 50 Amps. ( 6.8 Volts thru 91 Volts ); VF = 5.0 Vmax., IF = 50 Amps. ( 100 Volts thru 440 Volts ) add VF = 6.5 Vmax. IF = 50 Amps ( 480 Volts thru 600 Volts). PW = 8.3 ms, duty cycle = 4 pulses per minute maximum. ( 3 ) For Bipolar types moving VR of 10 Volts and under, the IR limit is doubled. ( 4 ) "6KE" will be omitted in marking on the diode. Page 3 of 4 Rev. 07 : February 23, 2011 TH09/2479 TH97/2478 IATF 0113686 SGS TH07/1033 FIG.1 - PULSE DERATING CURVE FIG.2 - MAXIMUM NON-REPETITIVE SURGE CURRENT (Unidirectional only) 120 120 8.3 ms Single Half Sine Wave JEDEC Method PEAK FORWARD SURGE CURRENT, (A) PEAK PULSE DERATING IN % OF PEAK POWER OR CURRENT RATING AND CHARACTERISTIC CURVES ( P6KE SERIES ) 100 80 60 40 20 100 80 VB 220V 60 40 20 0 0 25 50 75 100 125 150 0 175 VB > 220V 1 Ta, AMBIENT TEMPERATURE, ( C) 6 10 20 40 60 100 NUMBER OF CYCLES AT 60Hz FIG.3 - STEADY STATE POWER DERATING FIG.4 - PULSE RATING CURVE 10 Pp,PEAK POWER (kW) 5.00 PD, STEADY STATE POWER DISSIPATION (W) 4 2 3.75 2.50 1.25 10 1.0 Single Phase Half Wave 60 Hz Resistive or Inductive load 0.1 0.1s 1.0s 10s 1.0ms 100s 10ms 0 0 25 50 75 100 125 150 175 200 tp, PULSE WIDTH TL, LEAD TEMPERATURE (C) FIG.5 - PULSE WAVEFORM FIG. 6 - TYPICAL JUNCTION CAPACITANCE Tr = 10s 100 Peak Value IRMS CJ, JUNCTION CAPACITANCE (pF) PEAK PULSE CURRENT - % IRMS UNI-DIRECTIONAL TJ=25 C Pulse Width (tp) is defined as that point where the peak current decays to 50% of IRSM Half Value - IRMS 2 50 10X1000 Waveform as defined by R.E.A. 0 tp 0 1.0 2.0 T, TIME(ms) Page 4 of 4 3.0 4.0 10000 Measured at Zero Bias TJ = 25C f = 1.0 MHz Vsig = 50mVp-p 1000 Measured at Stand-off Voltage, VWM 100 10 1 10 100 200 V(BR), Breakdown Voltage (V) Rev. 07 : February 23, 2011