MBR1035 - MBR1060 — Schottky Rectifiers
© 2001 Fairchild Semiconductor Corporation www.fairchildsemi.com
MBR1035 - MBR1060 Rev. 1.2.1 1
October 2013
MBR1035 - MBR1060
Schottky Rectifiers
Features
Low Power Loss, High Efficiency
High Surge Capacity
Metal Silicon Junction, Majority Carrier Conduction
High Current Capacity, Low Forward-Voltage Drop
Guard Ring for Over-V oltage Protection (OVP)
Applications
Low-Voltage
High-Frequency Inverters
Free Wheeling
Polarity Prot e cti on
Ordering Information
Absolute Maximum Ratings
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be opera-
ble above the recommended operating conditions and stressing the parts to these levels is not recommended. In addi-
tion, extended exposure to stresse s ab ove the recommended operating conditions may affect device reliability. The
absolute maximum ratings are stress ratings only. Values are at TA = 25°C unless otherwise noted.
Part Number Marking Package Packing Method
MBR1035 MBR1035
TO-220 2L Rail
MBR1045 MBR1045
MBR1050 MBR1050
MBR1060 MBR1060
Symbol Parameter Value Units
MBR1035 MBR1045 MBR1050 MBR1060
VRRM Maximum Repetitive Reverse V oltage 35 45 50 60 V
IF(AV) Average Rectified Forward Current 10 A
IFSM Non-Repetitive Peak Forward Surge Current
8.3 ms Single Half-Sine Wave 150 A
Tstg Storage Temperature Range -65 to +175 °C
TJOperating Junction Temperature -65 to +150 °C
Description
This Schottky rectifier is optimal for secondary rectifica-
tion and free-wheeling applications for high-efficiency
DC-DC convertor design, which features very low for-
ward voltage drop and low leakage current.
TO-220AC
12
PIIN2
PIIN1
Case
MBR1035 - MBR1060 — Schottky Rectifiers
© 2001 Fairchild Semiconductor Corporation www.fairchildsemi.com
MBR1035 - MBR1060 Rev. 1.2.1 2
Thermal Characteristics
Electrical Characteristics
Values are at TA = 25°C unless otherwise noted.
Symbol Parameter Value Units
PDPower Dissipation 2.0 W
RθJA Thermal Resistance, Junction to Ambient 60 °C/W
RθJL Thermal Resistance, Junction to Lead 2.0 °C/W
Symbol Parameter Value Units
MBR1035 MBR1045 MBR1050 MBR1060
VFForward Voltage
IF = 10 A, TC = 25°C0.80
V
IF = 10 A, TC = 125°C0.57 0.70
IF = 20 A, TC = 25°C0.84 0.95
IF = 20 A, TC = 125°C0.72 0.85
IRReverse Current at
Rated VR TC = 25°C0.1
mA
TC = 125°C15
IRRM Peak Repetitive Reverse Surge Current
2.0 μs Pulse Width, f = 1.0 kHz 1.0 0.5 A
MBR1035 - MBR1060 — Schottky Rectifiers
© 2001 Fairchild Semiconductor Corporation www.fairchildsemi.com
MBR1035 - MBR1060 Rev. 1.2.1 3
Typical Performance Characteristics
Figure 1. Forwar d Current Derating Curve Figure 2. Non-Repetitive Surge Current
Figure 3. Forward Voltage Ch ara ct e ri stics Figure 4. Reverse Current vs. Reverse Voltage
Figure 5. Total Capacitance Figure 6. Thermal Impedance Characteristics
MBR1035 - MBR1060 — Schottky Rectifiers
© 2001 Fairchild Semiconductor Corporation www.fairchildsemi.com
MBR1035 - MBR1060 Rev. 1.2.1 4
Physical Dimensions
Figure 7. TO-220, MOLDED, 2-LEAD (ACTIVE)
Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner
without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or
obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically the
warranty therein, which covers Fairchild products.
Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings:
http://www.fairchildsemi.com/dwg/TO/TO220B02.pdf.
For current tape and reel specifications, visit Fairchild Semiconductor’s online packaging area:
http://www.fairchildsemi.com/packing_dwg/PKG-TO220B02.pdf.
4.672
4.472
10.360
10.109
4.036
3.636
2.860
2.660
8.787
8.587
15.215
14.757
2.640
2.440
1.65
1.25
0.889
0.787
5.180
4.980
1.91
13.894
12.941
0.60
MAX
0.36
M
BA
0.36
M
C
AB
A
B
1.400
1.146
6.477
6.121
2.755
2.555
0.457
0.357
C
12.878
12.190
8.89
6.86
3.962
3.720
NOTES:
A. PACKAGE REFERENCE: JEDEC TO220
VARIATION AC.
B. ALL DIMENSIONS ARE IN MILLIMETERS.
C. DIMENSION AND TOLERANCE AS PER ASME
Y14.5-1994.
D. DIMENSIONS ARE EXCLUSIVE OF BURRS,
MOLD FLASH AND TIE BAR PROTRUSIONS.
E. THIS PACKAGE IS FSSZ INTERNAL PRODUCTION
AND INTENDED FOR DELTA CUSTOMER ONLY.
F. DRAWING FILE NAME: TO220B02REV4
12
3
TO-220 2L
© Fairchild Semiconductor Corporation www.fairchildsemi.com
TRADEMARKS
The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not
intended to be an exhaustive list of all such trademarks.
AccuPower¥
A
X-CAP®*
BitSiC
¥
Build it Now
¥
Core
PLUS¥
Core
POWER¥
CROSSVOLT
¥
CTL
¥
Current Transfer Logic
¥
DEUXPEED
®
Dual
Cool™
EcoSPARK
®
Effic
ientMax¥
E
SBC¥
Fairchild
®
Fairchild
Semiconductor®
FACT Quiet Series
¥
FACT
®
FAST
®
FastvCore
¥
FETBench
¥
FPS
¥
F-PFS¥
FRFET
®
Global Power Resource
SM
GreenBridge
¥
Green FPS
¥
Green FPS
¥ e-Series¥
G
max¥
GTO
¥
IntelliMAX
¥
ISOPLANAR
¥
Making Small Speakers Sound Louder
and Better™
MegaBuck
¥
MICROCOUPLER
¥
MicroFET
¥
MicroPak
¥
MicroPak2
¥
MillerDrive
¥
MotionMax
¥
mWSaver
®
OptoHiT
¥
OPTOLOGIC
®
OPTOPLANAR
®
®
PowerTrench
®
PowerXS™
Programmable Active Droop
¥
QFET
®
QS
¥
Quiet Series
¥
RapidConfigure
¥
¥
Saving our world, 1mW
/W/kW
at a time™
SignalWise
¥
SmartMax
¥
SMART START
¥
Solutions for Your Success
¥
SPM
®
STEALTH
¥
SuperFET
®
SuperSOT
¥-3
SuperSOT
¥-6
SuperSOT
¥-8
SupreMOS
®
SyncFET
¥
Sync-Lock™
®*
TinyBoost
®
TinyBuck
®
TinyCalc
¥
TinyLogic
®
TINYOPTO
¥
TinyPower
¥
TinyPWM
¥
TinyWire
¥
T
ranSiC¥
TriFault Detect
¥
T
RUECURRENT®*
PSerDes¥
UHC
®
Ultra FRFET
¥
UniFET
¥
VCX
¥
VisualMax
¥
VoltagePlus
¥
XS™
* Trademarks of System General Corporation, used under license by Fairchild Semiconductor.
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE
RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT
OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE
SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN,
WHICH COVERS THESE PRODUCTS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE
EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.
As used herein:
1. Life support devices or systems are devices or systems which, (a) are
intended for surgical implant into the body or (b) support or sustain
life, and (c) whose failure to pe
rform when properly used in
accordance with instructions for use provided in the labeling, can be
reasonably expected to result in a significant injury of the user.
system whose failure to
safety or effectiveness.
ANTI-COUNTERFEITING POLICY
Fairchild Semiconductor Corporation's Anti-Counterfeiting Policy. Fairchild's Anti-Counterfeiting Policy is also stated on our external website, www.fairchildsemi.com,
under Sales Support.
Counterfeiting of semiconductor parts is a growing problem in the industry. All manufacturers of semiconductor products are experiencing counterfeiting of their
parts. Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failed
applications, and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the
proliferation of counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild
Distributors who are listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild Distributors
are genuine parts, have full traceability, meet Fairchild's quality standards for handling and storage and provide access to Fairchild's full range of up-to-date technical
and product information. Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address any warranty issues that may arise.
Fairchild will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global
problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors.
PRODUCT STATUS DEFINITIONS
Definition of Terms
Datasheet Identification
Product Status
Definition
Advance Information
Formative
/
In Design
Datasheet contains the design specifications for product development. Specifications may change
in any manner without notice.
Preliminary First Production
Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild
Semiconductor reserves the right to make changes at any time without notice to improve design.
No Identification Needed
Full Production
Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make
changes at any time without notice to improve the design.
Obsolete
Not In Production
Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor.
The datasheet is for reference information only.
Rev. I66
®
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Fairchild Semiconductor:
MBR1045