EURO QUARTZ MP4, MP5 CRYSTALS 12 x 4.5mm Compatible SMD Crystal 3.2MHz to 70MHz Low frequencies from 3.5MHz to 70.0MHZ Fully RoHS compliant Two height profiles available, 4.8 or 3.8mm Standard EIA tape and reel supply DESCRIPTION OUTLINE & DIMENSIONS MP4 and MP5 crystals provide clock signals (from 3.2MHz) in a lowprofile SMD package. The part is electrically and mechanically compatible with traditional industry SMD packages and may be used as a 'drop-in' replacement. USE WITH DOUBLE-SIDED PCBs MP4 and MP5 crystals are designed for top board assembly and one solder reflow process. Do not reflow this part with the can inverted. SPECIFICATION Frequency Range AT-Cut Fundamental: AT-Cut 3rd Overtone: BT-Cut Fundamental: Calibration Tolerance at 25C*: Frequency stability: Storage Temperature: Equivalent Series Resistance: Shunt Capacitance (C0): Load Capacitance (CL): Ageing: Drive level: Reflow Soldering: Packaging: 3.2MHz to 48.0MHz 27.0MHz to 70.0MHz 24.0MHz to 48.0MHz 5, 10, 20 or 30ppm at 25C from 10ppm over-10 to +60C from 15ppm over -40 to +85C -50~+105C See table 7pF maximum Series or from 8pF to 32pF (Customer specified CL) <3ppm per year at +25C 100W typical, W maximum 10s maximum at 260C twice or 180s at 230C, once. 24mm EIA tape and reel, 1k per. EQUIVALENT SERIES RESISTANCE Frequency Range MHz ESR Max. AT-Cut Fundamental 3.2~3.4 3.5~6.0 6.1~10.0 10.1~30.0 300 120 60 40 PART NUMBER GENERATION Frequency Range MHz ESR Max. AT-Cut 3rd Overtone 27.0~30.0 30.1~50.0 50.1~70.0 150 100 80 Frequency Range MHz ESR Max. BT-Cut Fundamental 24.0~48.0 40 Part numbers for MP4 and MP5 crystals are generated as follows: Example: 3.5000MHz MP4 30/50/-10+60/12pF/60R Nominal Frequency Package MP4 or MP5 Calibration tolerance at 25C (ppm) Temperature Stability over temp. range (ppm) Operating Temp. Range (C) (Lower and upper limits) Load Capacitance (Either SR for series or CL in pF) Equivalent Series Resistance (Optional - use when special value is required) EUROQUARTZ LIMITED Blacknell Lane CREWKERNE Somerset UK TA18 7HE Tel: +44 (0)1460 230000 Fax: +44 (0)1460 230001 info@euroquartz.co.uk www.euroquartz.co.uk