OSM4 Series 5.0V Sinewave Oven Controlled Oscillators March 2007 * Ovenized quartz crystal high precision square wave generator with a Sine Wave output. * Tube packaging is available. * * * * 10 to 20 MHZ Full Size Thru-Hole DIP package Electronic Frequency Control (EFC) optional Good phase noise characteristics Pletronics Inc. certifies this device is in accordance with the RoHS 6/6 (2002/95/EC) and WEEE (2002/96/EC) directives. Pletronics Inc. guarantees the device does not contain the following: Cadmium, Hexavalent Chromium, Lead, Mercury, PBB's, PBDE's Weight of the Device: 6.2 grams Moisture Sensitivity Level: 1 As defined in J-STD-020C Second Level Interconnect code: e1 Absolute Maximum Ratings: Parameter Unit VCC Supply Voltage -0.5V to +7.0V Vi Input Voltage -0.5V to VCC + 0.5V Vo Output Voltage -0.5V to VCC + 0.5V Reliability: Environmental Compliance Parameter Condition Vibration 10 to 2000 Hz / 10 g Shock 2000 g, 0.3 mS, 1/2 sine Solderability MIL-STD-883 Method 2003 Thermal Shock MIL-STD-883 Method 1011, Condition A Product information is current as of publication date. The product conforms to specifications per the terms of the Pletronics standard warranty. Production processsing does not necessarily include testing of all parameters. Copyright (c) 2007, Pletronics Inc. OSM4 Series 5.0 V Sinewave Oven Controlled Oscillators March 2007 Part Number: OSM4048052 G G 010 040 - 20.00M -XX Internal code or blank Frequency MHZ (standards Shown) 10.000 12.800 16.000 16.384 19.440 20.000 32.768 40.000 Electronic Frequency Control 000 = No EFC 020 = _ + 2.0 ppm minimum 040 = _ + 4.0 ppm minimum 150 = _ + 15.0 ppm minimum 999 = _ + 4.0 ppm with 0 to 10K ohm Frequency Stability 003 = _ + 25 ppb for 0oC to 60oC 008 = _ + 75 ppb for 0oC to 60oC 005 = _ + 50 ppb for -20oC to 70oC 015 = + _ 150 ppb for -20oC to 70oC 010 = + _ 100 ppb for -40oC to 85oC 025 = _ + 250 ppb for -40oC to 85oC Upper Operating Temperature C = 50oC F = 65oC J = 80oC D = 55oC G = 70oC K = 85oC E = 60oC H = 75oC L = 90oC Lower Operating Temperature F = -15oC J = -30oC C = 0oC o D = -5 C G = -20oC K = -35oC E = -10oC H = -25oC L = -40oC Series Model Part Marking: PLE Where: c = N for no EFC, R for resistor, V for voltage OSM4050c fff.fff = Frequency in MHz fff.fff M Ymda = Date code (Year Month Day plus internal code) ymdannn nnn = Device number Standard values are listed, consult Pletronics Inc. for other options. Specifications such as frequency stability and operating temperature range, etc. are not identified from the marking. External packaging labels and packing list will correctly identify the ordered Pletronics part number. Codes for Date Code YMD Code 6 7 2006 2007 Year Code A JAN Month Code Day Code Day Code Day 1 1 D 13 T 25 8 2008 B FEB 2 2 E 14 U 26 C MAR 3 3 F 15 V 27 www.pletronics.com 9 2009 D APR 4 4 G 16 W 28 0 2010 E MAY 5 5 H 17 X 29 425-776-1880 F JUN 6 6 J 18 Y 30 1 2011 G JUL 7 7 K 19 Z 31 2 2012 H AUG J SEP K OCT 8 8 L 20 9 9 M 21 A 10 N 22 L NOV M DEC B 11 P 23 C 12 R 24 2 OSM4 Series 5.0 V Sinewave Oven Controlled Oscillators March 2007 Specification for 5.00V + _0.20V over the specified temperature range Item Min Max Unit Condition 10 20 MHZ See list of standard frequencies Frequency Accuracy vs. Temperature -250 250 ppb determined by part number Frequency Accuracy vs. Supply -100 +100 ppb for Supply change of 0.2V Frequency Accuracy vs. Load -10 +10 ppb _10% Load change of + Frequency Accuracy Short Term -0.5 +0.5 ppb for periods of 0.1 seconds to 30 seconds -0.05 +0.05 ppb for a period of 1 second 1st Year -0.70 +0.70 ppm 10 Years -4.0 +4.0 ppm Accumulated for 10 years -4.0 +4.0 ppm 0.5V to 5.0V, determined by part number > 47 K ohm -4.0 +4.0 ppm 0 to 10 Kohm, determined by part number > 4.7 K ohm ----- -80 -110 -135 -145 dBc/Hz -- 30 sec Frequency Range Aging Frequency Control (positive slope) Phase Noise Voltage Resistance 1 Hz 10 Hz 100 Hz 1,000Hz Warmup Output Waveform within specification after turn on at 0oC Sine Wave Output Level 1.0 2.0 V PP 50 ohm load 2.0 4.0 V PP 1K ohm // 5pF Output Harmonics -- -10 dBc 50 ohm load Output Spurious -- -70 dBc 50 ohm load Power Supply Current -- 110 mA at -20oC -- 70 mA at +30oC -- 250 mA for 10 seconds maximum Operating Temperature Range -40 +85 o Storage Temperature Range -55 +125 o Warmup www.pletronics.com 425-776-1880 C See Load Circuit Part number defines the temperature range to meet the accuracy specification C 3 OSM4 Series 5.0 V Sinewave Oven Controlled Oscillators March 2007 Load Circuit (nominal load: 50 ohms) ESD Rating Model Minimum Voltage Conditions Human Body Model 2000 MIL-STD-883 Method 3115 Charged Device Model 2000 JESD 22-C101 Package Labeling Label is 1" x 2.6" (25.4mm x 66.7mm) Font is Courier New Bar code is 39-Full ASCII Label is 1" x 2.6" (25.4mm x 66.7mm) Font is Arial (Will show OSM on label) www.pletronics.com 425-776-1880 4 OSM4 Series 5.0 V Sinewave Oven Controlled Oscillators March 2007 PCB Mounting (typical for lead free processing) Hand soldering is recommended at 250oC maximum for 5 seconds maximum per pin Mechanical: Inches PLE Cover: Kovar Electroless Nickel Plated 1 inch (25 m) typical Resistance welded to base Label: Laser Engraved Base: Kovar Glass to metal sealed leads Pin 7 Connected to case - or - White Kapton with Black Letters Pin Not to scale mm A 0.800 + _0.005 20.3 max B 0.52 + _0.005 13.2 max C 0.315 max 8.00 max D1 0.250 6.35 E1 0.020 0.51 F1 0.040 max 1.0 max G1 0.110 2.79 H 0.300 7.62 I1 0.600 15.24 J1 0.100 2.53 1 Nominal dimension Function Note 1 EFC 10 K ohm to ground -OR- 0.5 to 5.0V control voltage, depends on option ordered. Use the 30% value for initial operation 7 Ground (GND) 8 Output 14 Supply Voltage (VCC) Recommend connecting appropriate power supply bypass capacitors as close as possible. Layout and application information For Optimum Jitter Performance, Pletronics recommends: * Minimize air flow over the oscillator * Stabilize the power supply voltage for best performance. www.pletronics.com 425-776-1880 5 OSM4 Series 5.0 V Sinewave Oven Controlled Oscillators March 2007 IMPORTANT NOTICE Pletronics Incorporated (PLE) reserves the right to make corrections, improvements, modifications and other changes to this product at anytime. PLE reserves the right to discontinue any product or service without notice. Customers are responsible for obtaining the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to PLE's terms and conditions of sale supplied at the time of order acknowledgment. PLE warrants performance of this product to the specifications applicable at the time of sale in accordance with PLE's limited warranty. Testing and other quality control techniques are used to the extent PLE deems necessary to support this warranty. Except where mandated by specific contractual documents, testing of all parameters of each product is not necessarily performed. PLE assumes no liability for application assistance or customer product design. Customers are responsible for their products and applications using PLE components. To minimize the risks associated with the customer products and applications, customers should provide adequate design and operating safeguards. PLE products are not designed, intended, authorized or warranted to be suitable for use in life support applications, devices or systems or other critical applications that may involve potential risks of death, personal injury or severe property or environmental damage. Inclusion of PLE products in such applications is understood to be fully at the risk of the customer. Use of PLE products in such applications requires the written approval of an appropriate PLE officer. Questions concerning potential risk applications should be directed to PLE. PLE does not warrant or represent that any license, either express or implied, is granted under any PLE patent right, copyright, artwork or other intellectual property right relating to any combination, machine or process which PLE product or services are used. Information published by PLE regarding third-party products or services does not constitute a license from PLE to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from PLE under the patents or other intellectual property of PLE. Reproduction of information in PLE data sheets or web site is permissible only if the reproduction is without alteration and is accompanied by associated warranties, conditions, limitations and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. PLE is not responsible or liable for such altered documents. Resale of PLE products or services with statements different from or beyond the parameters stated by PLE for that product or service voids all express and implied warranties for the associated PLE product or service and is an unfair or deceptive business practice. PLE is not responsible for any such statements. Contacting Pletronics Inc. Pletronics Inc. 19013 36th Ave. West Lynnwood, WA 98036-5761 USA Tel: 425-776-1880 Fax: 425-776-2760 E-mail: ple-sales@pletronics.com URL: www.pletronics.com Copyright (c) 2006, 2007, Pletronics Inc. www.pletronics.com 425-776-1880 6