FN Series Crystal Clock Oscillator (XO) Legacy S1613 Series 7.0 x 5.0mm FN 3.3V CMOS Low Jitter XO Package: Recommended Land Pattern: 2 8 2 7.0 x 5.0mm Ceramic SMD 8 Product Features * 1 to 166 MHz Frequency Range * <1 ps RMS jitter Pin Functions: Pin Function * Pin-compatible with standard 7.0 x 5.0mm packages 1 OE Function 2 Ground * Designed for standard reflow and washing techniques 3 Clock Output 4 V DD * 3.3V CMOS/TTL compatible logic levels * Low power standby mode * Pb-free and RoHS/Green compliant Product Description The FN Series 3.3V crystal clock oscillator achieves superb jitter and stability over a broad range of operating conditions and frequencies. The output clock signal, generated internally with a non-PLL oscillator design, is compatible with LVCMOS/LVTTL logic levels. The device, available on tape and reel, is contained in a 7.0 x 5.0mm surface-mount ceramic package. Part Ordering Information: FN XXX YYYY Following the above format, Saronix-eCera part numbers will be assigned upon confirmation of exact customer requirements. Applications Legacy Ordering Information - For Reference Only: Ideal for low jitter or tight stability applications: * 802.11a/b/g WiFi * Ethernet * Fibre Channel A: ProductFamily B: XXX = FrequencyCode C: YYYY = SpecificationCode SaRonix * EPON Product Series * SONET/SDH linecards * DSLAM Frequency Stability AA = 20 ppm (-10 to +70 C) A = 25 ppm (-10 to +70 C) B = 50 ppm (-10 to +70 C) E = 50 ppm (-40 to +85C) * T1/E1, T3/E3 linecards * Serial Attached SCSI (SAS) * Server & Storage platforms SaRonix-eCeraTM is a Pericom(R) Semiconductor company S 1613 B - 75.0000 (T) * US: +1-408-435-0800 TW: +886-3-4518888 Packaging (T) = Tape & Reel full reel increments Blank = Bulk packaged Output Frequency (MHz) * All specifications are subject to change without notice. www.saronix-ecera.com FN 3.3 REV2008_DEC29_01.4 1 3.3V CMOS Low Jitter XO FN FN Series Crystal Clock Oscillator (XO) Legacy S1613 Series | 7.0 x 5.0mm Electrical Performance Parameter Min. Output Frequency Typ. 1 Supply Voltage +2.97 +3.3 Max. Units 166 MHz +3.63 V Notes As specified 15 1 to 32 MHz 25 Supply Current, Output Enabled 32 to 50 MHz mA 40 50 to 80 MHz 55 Supply Current, Standby Mode Frequency Stability Operating Temperature Range 1 to 36 MHz, 100 to 166 MHz 100 A 36 to 70 MHz 20 to 50 ppm +70 -40 +85 Duty Cycle See Note 1 below Commercial (standard) C Industrial (standard) 10% V DD V 15 pF 55 % Measured 50% V DD ns Measured 20/80% of waveform 90% V DD V Output Load 45 Rise and Fall Time A -20 Output Logic 0, VOL Output Logic 1, VOH 80 to 166 MHz 10 up to 50 MHz 7 50 to 80 MHz 5 80 to 124 MHz 3 125 to 166 MHz 2.5 Jitter, Phase 1 to 166 MHz 1 Jitter, Accumulated up to 80 MHz 5 80 to 166 MHz 3 Jitter, Total up to 80 MHz 50 80 to 166 MHz 30 ps RMS (1-) 10kHz to 20 MHz frequency band ps RMS (1-) 20.000 adjacent periods ps pk-pk 100.000 random periods Notes: 1. Stability includes all combinations of operating temperature, load changes, rated input (supply) voltage changes, initial calibration tolerance (25C), aging (1 year at 25C average effective ambient temperature), shock and vibration. 2. For specifications othere than those listed, please contact sales. Output Enable / Disable Function Parameter Min. Input Voltage (pin 1), Output Enable Typ. Max. Units 2.0 Input Voltage (pin 1), Output Disable (low power standby) 0.5 Internal Pullup Resistance 50 Notes V or open V Output is Hi-Z k Output Disable Delay 100 ns Output Enable Delay 10 ms Absolute Maximum Ratings Parameter Storage Temperature Min. Typ. -55 SaRonix-eCeraTM is a Pericom(R) Semiconductor company * Max. Units +125 C US: +1-408-435-0800 TW: +886-3-4518888 Notes * All specifications are subject to change without notice. www.saronix-ecera.com FN 3.3 REV2008_DEC29_01.4 2 3.3V CMOS Low Jitter XO FN FN Series Crystal Clock Oscillator (XO) Legacy S1613 Series | 7.0 x 5.0mm Test Circuit Test Point Power Supply 4 0.1F or 0.01F 3 1 15 pF (Including probe and fixture capacitance) 2 Output Enable / Disable Function Reflow Soldering Profile As per IPC/JEDEC J-STD-020C Temperature - C 1 to 3C/sec max 260 Peak 260C for 10 sec max 1 to 3C/sec 217 60 to 90 sec Time 4 to 6 minutes max Reliability Test Ratings This product is rated to meet the following test conditions: Type Parameter Test Condition Mechanical Shock MIL-STD-883, Method 2002, Condition B Mechanical Solderability JESD22-B102-D Method 2 (Preconditioning E) Mechanical Terminal strength MIL-STD-883, Method 2004, Condition D Mechanical Gross leak MIL-STD-883, Method 1014, Condition C Mechanical Fine leak MIL-STD-883, Method 1014, Condition A2 (R1 = 2x10 -8 atm cc/s) Mechanical Solvent resistance MIL-STD-202, Method 215 Environmental Thermal shock MIL-STD-883, Method 1011, Condition A Environmental Moisture resistance MIL-STD-883, Method 1004 Environmental Vibration MIL-STD-883, Method 2007, Condition A Environmental Resistance to soldering heat J-STD-020C Table 5-2 Pb-free devices (2 cycles max) SaRonix-eCeraTM is a Pericom(R) Semiconductor company * US: +1-408-435-0800 TW: +886-3-4518888 * All specifications are subject to change without notice. www.saronix-ecera.com FN 3.3 REV2008_DEC29_01.4 3