AZ23-V-G-Series Vishay Semiconductors Small Signal Zener Diodes, Dual Features * Dual silicon planar Zener diodes, common anode * The Zener voltages are graded according to the international E 24 standard * The parameters are valid for both diodes in one case. VZ and Rzj of the two diodes in one case is 5 % * Compliant to RoHS directive 2002/95/EC and in accordance to WEEE 2002/96/EC 1 2 3 20456 20512 1 Mechanical Data Case: SOT-23 Weight: approx. 8.1 mg Packaging codes/options: GS18/10 k per 13" reel, (8 mm tape), 10 k/box GS08/3 k per 7" reel, (8 mm tape), 15 k/box Absolute Maximum Ratings Tamb = 25 C, unless otherwise specified Parameter Power dissipation Test conditions Symbol Value Unit Device on fiberglass substrate, see layout on page 6 Ptot 300 mW Thermal Characteristics Tamb = 25 C, unless otherwise specified Parameter Test conditions Symbol Value Unit Thermal resistance junction to ambient air Device on fiberglass substrate, see layout on page 6 RthJA 420 K/W Tj 150 C Tstg - 65 to + 150 C Junction temperature Storage temperature range ** Please see document "Vishay Material Category Policy": www.vishay.com/doc?99902 Document Number 85867 Rev. 1.0, 05-Mar-09 For technical support, please contact: DiodesSSP@vishay.com www.vishay.com 1 AZ23-V-G-Series Vishay Semiconductors Electrical Characteristics Zener voltage range 1) Part number Marking code Dynamic resistance Rzj at IZT = 5 mA, f = 1 kHz VZ at IZT Rzj at IZT = 1 mA, f = 1 kHz V min. max. Test current Temperature coefficient of Zener voltage Reverse voltage IZT VZ at IZT VR at IR = 100 nA mA 10-4/C V min. max. AZ23C2V7-V-G D41 2.5 2.9 75 (< 83) < 500 5 -9 -4 - AZ23C3V0-V-G D42 2.8 3.2 80 (< 95) < 500 5 -9 -3 - AZ23C3V3-V-G D43 3.1 3.5 80 (< 95) < 500 5 -8 -3 - AZ23C3V6-V-G D44 3.4 3.8 80 (< 95) < 500 5 -8 -3 - AZ23C3V9-V-G D45 3.7 4.1 80 (< 95) < 500 5 -7 -3 - AZ23C4V3-V-G D46 4 4.6 80 (< 95) < 500 5 -6 -1 - AZ23C4V7-V-G D47 4.4 5 70 (< 78) < 500 5 -5 2 - AZ23C5V1-V-G D48 4.8 5.4 30 (< 60) < 480 5 -3 4 > 0.8 AZ23C5V6-V-G D49 5.2 6 10 (< 40) < 400 5 -2 6 >1 AZ23C6V2-V-G D50 5.8 6.6 4.8 (< 10) < 200 5 -1 7 >2 AZ23C6V8-V-G D51 6.4 7.2 4.5 (< 8) < 150 5 2 7 >3 AZ23C7V5-V-G D52 7 7.9 4 (< 7) < 50 5 -3 7 >5 AZ23C8V2-V-G D53 7.7 8.7 4.5 (< 7) < 50 5 4 7 >6 AZ23C9V1-V-G D54 8.5 9.6 4.8 (< 10) < 50 5 5 8 >7 AZ23C10-V-G D55 9.4 10.6 5.2 (< 15) < 70 5 5 8 > 7.5 AZ23C11-V-G D56 10.4 11.6 6 (< 20) < 70 5 5 9 > 8.5 AZ23C12-V-G D57 11.4 12.7 7 (< 20) < 90 5 6 9 >9 AZ23C13-V-G D58 12.4 14.1 9 (< 25) < 110 5 7 9 > 10 AZ23C15-V-G D59 13.8 15.6 11 (< 30) < 110 5 7 9 > 11 AZ23C16-V-G D60 15.3 17.1 13 (< 40) < 170 5 8 9.5 > 12 AZ23C18-V-G D61 16.8 19.1 18 (< 50) < 170 5 8 9.5 > 14 AZ23C20-V-G D62 18.8 21.2 20 (< 50) < 220 5 8 10 > 15 AZ23C22-V-G D63 20.8 23.3 25 (< 55) < 220 5 8 10 > 17 AZ23C24-V-G D64 22.8 25.6 28 (< 80) < 220 5 8 10 > 18 AZ23C27-V-G D65 25.1 28.9 30 (< 80) < 250 5 8 10 > 20 AZ23C30-V-G D66 28 32 35 (< 80) < 250 5 8 10 > 22.5 AZ23C33-V-G D67 31 35 40 (< 80) < 250 5 8 10 > 25 AZ23C36-V-G D68 34 38 40 (< 90) < 250 5 8 10 > 27 AZ23C39-V-G D69 37 41 50 (< 90) < 300 5 10 12 > 29 AZ23C43-V-G D70 40 46 60 (< 100) < 700 5 10 12 > 32 AZ23C47-V-G D71 44 50 70 (< 100) < 750 5 10 12 > 35 AZ23C51-V-G D72 48 54 70 (< 100) < 750 5 10 12 > 38 Note 1) Tested with pulses tp = 5 ms www.vishay.com 2 For technical support, please contact: DiodesSSP@vishay.com Document Number 85867 Rev. 1.0, 05-Mar-09 AZ23-V-G-Series Vishay Semiconductors Electrical Characteristics Zener voltage range 1) Part number Marking code Dynamic resistance Rzj at IZT = 5 mA, f = 1 kHz VZ at IZT Rzj at IZT = 1 mA, f = 1 kHz V min. max. Test current Temperature coefficient of Zener voltage Reverse voltage IZT VZ at IZT VR at IR = 100 nA mA 10-4/C V min. max. AZ23B2V7-V-G D41 2.65 2.75 75 (< 83) < 500 5 -9 -4 - AZ23B3V0-V-G D42 2.94 3.06 80 (< 95) < 500 5 -9 -3 - AZ23B3V3-V-G D43 3.23 3.37 80 (< 95) < 500 5 -8 -3 - AZ23B3V6-V-G D44 3.53 3.67 80 (< 95) < 500 5 -8 -3 - AZ23B3V9-V-G D45 3.82 3.98 80 (< 95) < 500 5 -7 -3 - AZ23B4V3-V-G D46 4.21 4.39 80 (< 95) < 500 5 -6 -1 - AZ23B4V7-V-G D47 4.61 4.79 70 (< 78) < 500 5 -5 2 - AZ23B5V1-V-G D48 5 5.2 30 (< 60) < 480 5 -3 4 > 0.8 AZ23B5V6-V-G D49 5.49 5.71 10 (< 40) < 400 5 -2 6 >1 AZ23B6V2-V-G D50 6.08 6.32 4.8 (< 10) < 200 5 -1 7 >2 >3 AZ23B6V8-V-G D51 6.66 6.94 4.5 (< 8) < 150 5 2 7 AZ23B7V5-V-G D52 7.35 7.65 4 (< 7) < 50 5 -3 7 >5 AZ23B8V2-V-G D53 8.04 8.36 4.5 (< 7) < 50 5 4 7 >6 AZ23B9V1-V-G D54 8.92 9.28 4.8 (< 10) < 50 5 5 8 >7 AZ23B10-V-G D55 9.8 10.2 5.2 (< 15) < 70 5 5 8 > 7.5 > 8.5 AZ23B11-V-G D56 10.8 11.2 6 (< 20) < 70 5 5 9 AZ23B12-V-G D57 11.8 12.2 7 (< 20) < 90 5 6 9 >9 AZ23B13-V-G D58 12.7 13.3 9 (< 25) < 110 5 7 9 > 10 AZ23B15-V-G D59 14.7 15.3 11 (< 30) < 110 5 7 9 > 11 AZ23B16-V-G D60 15.7 16.3 13 (< 40) < 170 5 8 0.5 > 12 AZ23B18-V-G D61 17.6 18.4 18 (< 50) < 170 5 8 0.5 > 14 AZ23B20-V-G D62 19.6 20.4 20 (< 50) < 220 5 8 10 > 15 AZ23B22-V-G D63 21.6 22.4 25 (< 55) < 220 5 8 10 > 17 AZ23B24-V-G D64 23.5 24.5 28 (< 80) < 220 5 8 10 > 18 AZ23B27-V-G D65 26.5 27.5 30 (< 80) < 250 5 8 10 > 20 AZ23B30-V-G D66 29.4 30.6 35 (< 80) < 250 5 8 10 > 22.5 AZ23B33-V-G D67 32.3 33.7 40 (< 80) < 250 5 8 10 > 25 AZ23B36-V-G D68 35.3 36.7 40 (< 90) < 250 5 8 10 > 27 AZ23B39-V-G D69 38.2 39.8 50 (< 90) < 300 5 10 12 > 29 AZ23B43-V-G D70 42.1 43.9 60 (< 100) < 700 5 10 12 > 32 AZ23B47-V-G D71 46.1 47.9 70 (< 100) < 750 5 10 12 > 35 AZ23B51-V-G D72 50 52 70 (< 100) < 750 5 10 12 > 38 Note 1) Tested with pulses tp = 5 ms Document Number 85867 Rev. 1.0, 05-Mar-09 For technical support, please contact: DiodesSSP@vishay.com www.vishay.com 3 AZ23-V-G-Series Vishay Semiconductors Typical Characteristics Tamb = 25 C, unless otherwise specified IF mA 103 103 102 5 4 3 2 10 Rzth TJ = 100 C 1 Rzth = RthA x VZ x VZ Tj 102 10-1 5 4 3 TJ = 25 C 2 10-2 10 10-3 5 4 3 10-4 10 negative 2 -5 positive 1 0 0.2 0.4 0.6 0.8 1V 1 VF 18114 2 3 4 5 10 18121 Figure 1. Forward characteristics 2 3 4 5 100 V VZ at IZ = 5 mA Figure 4. Thermal Differential Resistance vs. Zener Voltage 100 mW 500 7 5 4 400 Rzj Ptot 3 2 300 10 7 200 5 4 3 100 2 0 0 100 1 200 C Figure 2. Admissible Power Dissipation vs. Ambient Temperature 103 5 4 3 2 3 4 5 10 2 102 100 V mV/C 25 VZ Tj 47 + 51 43 39 36 3 4 5 VZ Figure 5. Dynamic Resistance vs. Zener Voltage Tj = 25 C 7 2 18122 Tamb 18115 Rzj Tj = 25 C IZ = 5 mA 1 20 5 mA IZ = 1 mA 20 mA 15 10 7 5 4 3 5 2 0 10 0.1 18120 -5 2 3 4 5 1 2 IZ 3 4 5 10 mA Figure 3. Dynamic Resistance vs. Zener Current www.vishay.com 4 1 2 3 4 5 18123 10 2 3 4 5 100 V VZ Figure 6. Temperature Dependence of Zener Voltage vs. Zener Voltage For technical support, please contact: DiodesSSP@vishay.com Document Number 85867 Rev. 1.0, 05-Mar-09 AZ23-V-G-Series Vishay Semiconductors V 0.8 V 1.6 25 0.7 15 VZ at IZ = 5 mA 0.6 VZ 1.2 VZ 0.5 1 8 0.4 0.8 7 0.3 0.2 6.2 5.9 0.1 5.6 0 0.6 0.4 0.2 0 5.1 -1 0 20 40 60 80 100 120 140 C 18124 - 0.2 4.7 3.6 - 0.2 VZ = Rzth x IZ 1.4 10 - 0.4 18127 1 2 2 100 V 3 4 5 Figure 10. Change of Zener Voltage from Turn-on up to the Point of Thermal Equilibrium vs. Zener Voltage mV/C 100 V 5 VZ = Rzth x IZ IZ = 5 mA 4 80 VZ 60 3 40 2 20 1 0 IZ = 5 mA IZ = 2 mA 0 0 20 40 60 80 0 100 V VZ 18125 20 40 mA 50 8 7 Tj = 25 C 6.8 3.3 4.7 40 5 3.9 5.6 2.7 lZ 51 43 100 V 80 Figure 11. Change of Zener Voltage from Turn-on up to the Point of Thermal Equilibrium vs. Zener Voltage V 9 6 60 VZ 18128 Figure 8. Temperature Dependence of Zener Voltage vs. Zener Voltage VZ 10 4 5 VZ at IZ = 5 mA Figure 7. Change of Zener Voltage vs. Junction Temperature VZ Tj 3 Tj 8.2 30 4 36 3 20 2 1 Test current IZ 5 mA 10 0 IZ = 2 mA -1 0 20 40 18126 60 80 100 120 Tj 140 C Figure 9. Change of Zener Voltage vs. Junction Temperature Document Number 85867 Rev. 1.0, 05-Mar-09 0 0 1 2 18111 3 4 5 6 7 8 9 10 V VZ Figure 12. Breakdown Characteristics For technical support, please contact: DiodesSSP@vishay.com www.vishay.com 5 AZ23-V-G-Series Vishay Semiconductors mA 30 mA 10 10 12 Tj = 25 C Tj = 25 C 8 lZ lZ 15 20 18 Test current IZ 5 mA 6 39 51 43 47 22 4 27 Test 10 current IZ 5 mA 33 36 2 0 0 0 10 20 18112 40 V 30 0 VZ 10 20 30 40 50 60 70 80 90 100 V VZ 18113 Figure 13. Breakdown Characteristics Figure 14. Breakdown Characteristics Layout for RthJA test Thickness: Fiberglass 0.059 inches (1.5 mm) Copper leads 0.012 inches (0.3 mm) 7.5 (0.3) 3 (0.12) 1 (0.4) 2 (0.8) 1 (0.4) 12 (0.47) 15 (0.59) 2 (0.8) 0.8 (0.03) 5 (0.2) 1.5 (0.06) 5.1 (0.2) www.vishay.com 6 17451 For technical support, please contact: DiodesSSP@vishay.com Document Number 85867 Rev. 1.0, 05-Mar-09 AZ23-V-G-Series Vishay Semiconductors Package Dimensions in millimeters (inches): SOT-23 0.9 (0.035) 1.15 (0.045) o8 0.2 (0.008) 0.098 (0.004) 0.175 (0.007) 0.550 ref. (0.022 ref.) 0.1 (0.004) max. 3.1 (0.122) 2.8 (0.110) 0.45 (0.018) 0.35 (0.014) 0.35 (0.014) 0 t 0.5 (0.020) 0.45 (0.018) 0.3 (0.012) 2.6 (0.102) 2.35 (0.093) 0.7 (0.028) 0.95 (0.037) 0.9 (0.035) 1.43 (0.056) 1 (0.039) 0.9 (0.035) Foot print recommendation: 2 (0.079) 1 (0.039) 0.9 (0.035) 1.20 (0.047) 0.45 (0.018) 0.35 (0.014) 0.95 (0.037) Document no.: 6.541-5014.01-4 Rev. 8 - Date: 23.Sept.2009 17418 Document Number 85867 Rev. 1.0, 05-Mar-09 For technical support, please contact: DiodesSSP@vishay.com www.vishay.com 7 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1