SURFACE MOUNT DISPLAY P/N: KPSC03-104 Features SUPER BRIGHT RED Description 0.3 INCH DIGIT HEIGHT. The Super Bright Red source color devices are made LOW CURRENT OPERATION. with Gallium Aluminum Arsenide Red Light Emitting EXCELLENT CHARACTER APPEARANCE. Diode. I.C. COMPATIBLE. MECHANICALLY RUGGED. GRAY FACE,WHITE SEGMENT. PACKAGE : 550PCS / REEL. RoHS COMPLIANT. Package Dimensions & Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches), Tolerance is 0.25(0.01")unless otherwise noted. 2. Specifications are subject to change without notice. SPEC NO: DSAB1989 REV NO: V.7 DATE: NOV/19/2005 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.L.LI PAGE: 1 OF 4 Selection Guide Part No. Dice KPSC03-104 Iv (ucd) @ 10 mA Lens Type SUPER BRIGHT RED (GaAlAs) WHITE DIFFUSED Min. Typ. 1900 7657 Description Common Cathode, Rt. Hand Decimal. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. peak Peak Wavelength Super Bright Red D Dominant Wavelength 1/2 Max. Units Test Conditions 660 nm IF=20mA Super Bright Red 640 nm IF=20mA Spectral Line Half-width Super Bright Red 20 nm IF=20mA C Capacitance Super Bright Red 45 pF VF=0V;f=1MHz VF Forward Voltage Super Bright Red 1.85 2.5 V IF=20mA IR Reverse Current Super Bright Red 10 uA VR = 5V Absolute Maximum Ratings at TA=25C Parameter Super Bright Red Units Power dissipation 100 mW DC Forward Current 30 mA Peak Forward Current [1] 155 mA 5 V Reverse Voltage Operating/Storage Temperature -40C To +85C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAB1989 REV NO: V.7 DATE: NOV/19/2005 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.L.LI PAGE: 2 OF 4 Super Bright Red KPSC03-104 SPEC NO: DSAB1989 REV NO: V.7 DATE: NOV/19/2005 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.L.LI PAGE: 3 OF 4 KPSC03-104 Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) Remarks: If special sorting is required (e.g. binning based on forward voltage, Luminous intensity/ luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous intensity/ Luminous Flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAB1989 REV NO: V.7 DATE: NOV/19/2005 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.L.LI PAGE: 4 OF 4