E5GN-RT-C AC100-240N6 - OMRON - Datasheet.Directory

CSM_E5CK_DS_E_3_1

Digital Controller

E5CK

Advanced, Compact Digital Controllers

• IP66/NEMA4 (indoor use) front face.

• Modular structure, one-stock type.

• Heating/cooling control.

• Serial communications (RS-232C and RS-485).

• Temperature and analog inputs.

• High-accuracy: 100 ms sampling (for analog input).

• Advanced tuning which includes fuzzy self-tuning.

• Conforms to international EMC and safety standards.

Refer to Safety Precautions for All Temperature Controllers.Refer to E5

K Operation for operating

procedures.

Model Number Structure

■Model Number Legend

Refer to the following when ordering set models.

1. Constant Value/Program

Blank:Constant value

T: Program

2. Control Output 1/Control Output 2

AA: Without Output Unit (field interchangeable)

RR: Relay/Relay

QR: Pulse (NPN)/Relay

CR: Linear (4 to 20 mA)/Relay

VR: Linear (0 to 10 V)/Relay

QQ: Pulse (NPN)/Pulse (NPN)

3. Auxiliary Output

1: Auxiliary output (1 point)

4. Option

01: RS-232C serial communication

03: RS-485 serial communication

B: Event input (1 point)

F: Transfer output (4 to 20 mA)

Note: E5CK-VR1 and E5CK-QQ1 are not available, but with options.

Ordering Information

■List of Models

Note: A single Output Unit and Option Unit can be mounted to each Base Unit.

1 2 3 4

E5CK-@@@@

Description Model Specification

Base Unit E5CK-AA1 AC100-240 Base Unit

E5CK-AA1-500 AC100-240 Base Unit with terminal cover

E5CK-TAA1 AC100-240 Standard model

E5CK-TAA1-500 AC100-240 Standard model with terminal cover

Description Model Specification

Output Unit E53-R4R4 Relay/Relay

E53-Q4R4 Pulse (NPN)/Relay

E53-Q4HR4 Pulse (PNP)/Relay

E53-C4R4 Linear (4 to 20 mA)/Relay

E53-C4DR4 Linear (0 to 20 mA)/Relay

E53-V44R4 Linear (0 to 10 V)/Relay

E53-Q4Q4 Pulse (NPN)/Pulse (NPN)

E53-Q4HQ4H Pulse (PNP)/Pulse (PNP)

E5CK

Inspection Report

The Digital Controller can be provided together with an inspection report.

Refer to the following legend with the suffix “K” when ordering a model provided together with an inspection report.

E5CK-AA1-K, E53-CKF-K

■Accessories (Order Separately)

Note: The Rubber Packing is provided with the Digital Controller.

Specifications

■Ratings

Note: 1. Do not use the output from an inverter as the power supply. Refer to Safety Precautions for All Temperature Controllers.

2. The E5CK-T does not support fuzzy self-tuning.

■Input Ranges

Platinum Resistance Thermometer

Description Model Specification

Option Unit E53-CK01 RS-232C

E53-CK03 RS-485

E53-CKB Event input: 1 point

E53-CKF Transfer output (4 to 20 mA)

Name Model

Terminal Cover E53-COV07

Name Model

Rubber Packing Y92S-29

Item 100 to 240 VAC type

Supply voltage 100 to 240 VAC, 50/60 Hz

Power consumption 15 VA

Operating voltage range 85% to 110% of rated supply voltage

Input Thermocouple: K, J, T, E, L, U, N, R, S, B, W, PLII

Platinum resistance thermometer: JPt100, Pt100

Current input: 4 to 20 mA, 0 to 20 mA

Voltage input: 1 to 5 V, 0 to 5 V, 1 to 10 V

Input impedance Current input: 150 Ω

Voltage input: 1 MΩ min.

Control output According to Output Unit (see Output Unit Ratings and Characteristics)

Auxiliary output SPST-NO, 1 A at 250 VAC (resistive load)

Control method ON/OFF or 2-PID control (with auto-tuning)

Setting method Digital setting using front panel keys

Indication method 7-segment digital display and LEDs

Other functions According to Option Unit (see Output Unit Ratings and Characteristics)

Input (switch selectable) JPt100 Pt100

Range °C−199.9 to 650.0 −199.9 to 650.0

°F−199.9 to 999.9 −199.9 to 999.9

Resolution (°C/°F)

(main setting and alarm)

E5CK

Thermocouple

Note: Setting number is factory-set to 2 (K1).

Thermocouple W is W/Re 5-26 (tungsten rhenium 5, tungsten rhenium 26).

Current/Voltage

Input (switch

selectable)

(See note.)

K1 K2 J1 J2 T E L1 L2 U N R S B W PLII

Range °C−200

1,300

0.0 to

500.0

−100

to 850

0.0 to

400.0

−199.9

to 400.0

0 to

600

−100

to 850

0.0 to

400.0

−199.9

to 400.0

−200

1,300

0 to

1,700

0 to

1,700

100 to

1,800

0 to

2,300

0 to

1,300

°F−300

2,300

0.0 to

900.0

−100

1,500

0.0 to

750.0

−199.9

to 700.0

0 to

1,100

−100

1,500

0.0 to

750.0

−199.9

to 700.0

−300

2,300

0 to

3,000

0 to

3,000

300 to

3,200

0 to

4,100

0 to

2,300

Resolution (°C/

°F) (main setting

and alarm)

2 3 4 5 6 7 8 9 10 111213141516

Input (switch selectable) Current input Voltage input

4 to 20 mA 0 to 20 mA 1 to 5 V 0 to 5 V 0 to 10 V

Range One of following ranges depending on results of scaling

−1999 to 9999

−199.9 to 999.9

−19.99 to 99.99

−1.999 to 9.999

Resolution (°C/°F)

(main setting and alarm)

17 18 19 20 21

E5CK

■Characteristics

Note: The indication accuracy of the K1, T, and N thermocouples at a temperature of −100°C or less is ±2°C ±1 digit maximum. The indication

accuracy of the U, L1, and L2 thermocouples at any temperature is ±2°C ±1 digit maximum.

The indication accuracy of the B thermocouple at a temperature of 400°C or less is unrestricted.

The indication accuracy of the R and S thermocouples at a temperature of 200°C or less is ±3°C ±1 digit maximum.

The indication accuracy of the W thermocouple at any temperature is (±0.3% of the indicated value or ±3°C, whichever is greater) ±1digit

maximum.

The indication accuracy of the PLII thermocouple at any temperature is (±0.3% or ±2°C, whichever is greater) ±1 digit maximum.

Indication accuracy (See note.) Thermocouple:

(±0.3% of indication value or ±1°C, whichever greater) ±1 digit max.

Platinum resistance thermometer:

(±0.2% of indication value or ±0.8°C, whichever greater) ±1 digit max.

Analog input: ±0.2% FS ±1 digit max.

Hysteresis 0.01% to 99.99% FS (in units of 0.01% FS)

Proportional band (P) 0.1% to 999.9% FS (in units of 0.1% FS)

Integral (reset) time (I) 0 to 3,999 s (in units of 1 s)

Derivative (rate) time (D) 0 to 3,999 s (in units of 1 s)

Control period 1 to 99 s (in units of 1 s)

Manual reset value 0.0% to 100.0% (in units of 0.1%)

Alarm setting range −1,999 to 9,999 or −199.9 or 999.9 (decimal point position dependent on input type)

Set time 0 to 99 hrs 59 min or 0 to 99 min 59 s

Program capacity 4 patterns, 16 steps (possible to use up to 4 patterns with the communications function.)

Programming method Time or ramp setting method

Time accuracy ±0.2% (±500 ms) of the set value

Sampling period Temperature input: 250 ms

Current/voltage input: 100 ms

Insulation resistance 20 MΩ min. (at 500 VDC)

Dielectric strength 2,000 VAC, 50/60 Hz for 1 min between terminals of different polarities

Vibration resistance Malfunction: 10 to 55 Hz, 10 m/s2 (approx. 1G) for 10 min each in X, Y, and Z directions

Destruction: 10 to 55 Hz, 20 m/s2 (approx. 2G) for 2 hrs each in X, Y, and Z directions

Shock resistance Malfunction: 200 m/s2 min. (approx. 20G), 3 times each in 6 directions

(100 m/s2 (approx. 10G) applied to the relay)

Destruction: 300 m/s2 min. (30G), 3 times each in 6 directions

Ambient temperature Operating: −10°C to 55°C (with no icing)/3-year warranty period: –10°C to 50°C

Storage: −25°C to 65°C (with no icing)

Ambient humidity Operating: 35% to 85%

Degree of protection Front panel: NEMA4 for indoor use (equivalent to IP66)

Rear case: IEC standard IP20

Terminals: IEC standard IP00

Memory protection Non-volatile memory (number of writings: 100,000 operations)

Weight Approx. 170 g;

Adapter: approx. 10 g

EMC Emission Enclosure: EN55011 Group 1 class A

Emission AC Mains: EN55011 Group 1 class A

Immunity ESD: EN61000-4-2: 4 kV contact discharge (level 2)

8 kV air discharge (level 3)

Immunity RF-interference: ENV50140: 10 V/m (amplitude modulated, 80 MHz to 1 GHz)

(level 3)

10 V/m (pulse modulated, 900 MHz)

Immunity Conducted Disturbance: ENV50141: 10 V (0.15 to 80 MHz) (level 3)

Immunity Burst: EN61000-4-4: 2 kV power-line (level 3)

2 kV I/O signal-line (level 4)

Approved standards UL61010C-1, CSA 22.2 No. 61010-1

Conforms to EN61326-1: 2006, EN61010-1 (IEC61010-1)

Conforms to VDE0106/part 100 (Finger Protection), when the separately-ordered terminal cover is

mounted.

E5CK

■Output Unit Ratings and Characteristics

■Option Unit Ratings and Characteristics

Note: Event input is used for switching the target value, run or stop command, or automatic and manual mode with an external signal input.

Model Control output 1/Control output 2

E53-R4R4 Relay / Relay

E53-Q4R4 Voltage (NPN) / Relay

E53-Q4HR4 Voltage (PNP) / Relay

E53-C4R4 4 to 20 mA / Relay

E53-C4DR4 0 to 20 mA / Relay

E53-V44R4 0 to 10 mA / Relay

E53-Q4Q4 Voltage (NPN) / Voltage (NPN)

E53-Q4HQ4H Voltage (PNP) / Voltage (PNP)

Output Type Specifications

Relay

Voltag e (NP N)

Voltag e (PNP)

250 VAC. 3 A

12 VDC, 20 mA (with short-circuit protection)

0 to 10 V

4 to 20 mA

0 to 10 VDC, Permissible load impedance:

1 kΩ min., Resolution: Approx. 2600

4 to 20 mA, Permissible load impedance:

500 Ω max., Resolution: Approx. 2600

Model Specifications

E53-CKB Event input Contact input:

ON: 1 kΩ max., OFF: 100 kΩ min.

No-contact input:

ON: residual voltage 1.5 V max., OFF: leakage current 0.1 mA max.

E53-CK01 Communications RS-232C Transmission method: Half-duplex

Synchronization method: Start-stop synchronization (asynchronous method)

Baud rate: 1.2/2.4/4.8/9.6/19.2 kbps

E53-CK03 RS-485

E53-CKF Transfer output 4 to 20 mA DC:

Permissible load impedance: 500 Ω max.

Resolution: approx. 2,600

E5CK

Nomenclature

Dimensions

Note: All units are in millimeters unless otherwise indicated.

Operation Indicators

A/M Key

No. 1 Display

No. 2 Display

Up Key/Down Key

Display Key

• OUT1

Lights when the pulse output

function assigned to control

output 1 turns ON.

• OUT2

Lights when the pulse output

function assigned to control

output 2 turns ON.

• SUB1

Lights when the output

function assigned to auxiliary

output 1 turns ON.

• MANU

Lights when the manual

operation mode.

• STOP

Lights during operation has

stopped.

• RMT

Lights during remote

operation.

• AT

Flashes during auto-tuning.

Press to select the auto operation or

manual operation.

Press for less than 1 s to shift the

display to the next parameter. When

this key is pressed for 1 s or more,

the menu screen will be displayed in

any case.

Press to increase or decrease the

value on the No.2 display.

Displays the set point, set point

during SP ramp, manipulated

variable, or parameter settings.

Displays the process value or

parameter symbols.

53 × 53 13 100

44.8 × 44.8

45+0.6

E5CK

Panel Cutouts

65 min.

60 min.

Note: 1. Recommended panel thickness is 1 to 5 mm.

2. Maintain the specified vertical and horizontal

mounting space between each Unit. Units must not

be closely mounted vertically or horizontally.

E5CK

Terminal Cover

Unit Label (Order Separately)

E53-COV07

(With rivet)

Y92S-L1

In the interest of product improvement, specifications are subject to change without notice.

ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.

To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.

Read and Understand This Catalog

Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or

comments.

Warranty and Limitations of Liability

WARRANTY

OMRON's exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if specified)

from date of sale by OMRON.

OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-INFRINGEMENT, MERCHANTABILITY, OR

FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES THAT THE BUYER OR USER ALONE HAS

DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. OMRON DISCLAIMS ALL OTHER

WARRANTIES, EXPRESS OR IMPLIED.

LIMITATIONS OF LIABILITY

OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR COMMERCIAL LOSS

IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT

LIABILITY.

In no event shall the responsibility of OMRON for any act exceed the individual price of the product on which liability is asserted.

IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS REGARDING THE PRODUCTS UNLESS

OMRON'S ANALYSIS CONFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND NOT

SUBJECT TO CONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR REPAIR.

Application Considerations

SUITABILITY FOR USE

OMRON shall not be responsible for conformity with any standards, codes, or regulations that apply to the combination of products in the customer's

application or use of the products.

At the customer's request, OMRON will provide applicable third party certification documents identifying ratings and limitations of use that apply to the

products. This information by itself is not sufficient for a complete determination of the suitability of the products in combination with the end product,

machine, system, or other application or use.

The following are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all possible

uses of the products, nor is it intended to imply that the uses listed may be suitable for the products:

•

Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this catalog.

•

Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles,

safety equipment, and installations subject to separate industry or government regulations.

•

Systems, machines, and equipment that could present a risk to life or property.

Please know and observe all prohibitions of use applicable to the products.

NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE

SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCTS ARE PROPERLY RATED AND

INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.

PROGRAMMABLE PRODUCTS

OMRON shall not be responsible for the user's programming of a programmable product, or any consequence thereof.

Disclaimers

CHANGE IN SPECIFICATIONS

Product specifications and accessories may be changed at any time based on improvements and other reasons.

It is our practice to change model numbers when published ratings or features are changed, or when significant construction changes are made.

However, some specifications of the products may be changed without any notice. When in doubt, special model numbers may be assigned to fix or

establish key specifications for your application on your request. Please consult with your OMRON representative at any time to confirm actual

specifications of purchased products.

DIMENSIONS AND WEIGHTS

Dimensions and weights are nominal and are not to be used for manufacturing purposes, even when tolerances are shown.

PERFORMANCE DATA

Performance data given in this catalog is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the

result of OMRON’s test conditions, and the users must correlate it to actual application requirements. Actual performance is subject to the OMRON

Warranty and Limitations of Liability.

ERRORS AND OMISSIONS

The information in this document has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical,

typographical, or proofreading errors, or omissions.

2009.4

In the interest of product improvement, specifications are subject to change without notice.

OMRON Corporation

Industrial Automation Company

http://www.ia.omron.com/