antennas A wide array of Pulse antennas provide solutions to GSM, CDMA, WCDMA, LTE, TD-SCDMA, WiMax, WiFi TM, GPS, ZigBeeTM, Bluetooth (R), UWB, ISM, DVB-H, MediaFLOTM, DMB-S, Satellite Radios, DECT and other custom applications. Please pick from the charts at htttp://www.pulseelectronics.com/antennas/applications. Click on a part number to access the corresponding data sheet. Contact Pulse for more information on products that are not covered in this catalog. Antennas for mobile phones Solutions for Mobile Phone Antennas Pulses customized antennas for mobile phones are based on a thorough knowledge of the design of modern handsets, the antenna requirements, and the challenges of devices functioning in multi-radio environments. Pulse has extensive experience in main antenna design and utilizes technologies such as sheet metals, flex radiators, LDS, and ceramic solutions. Pulse products offer optimal and well-proven solutions for each application and form factor. The product range for mobile phones includes main and complementary antennas and integrated antenna modules, including fully tested speaker/antenna modules optimized for audio and RF performance. Antennas for wireless devices Antennas for Wireless Access Point Pulse's new line of wireless access point antennas offers flexible and economical solutions for wireless device OEMs. These antennas offer superior transmission and reception between wireless access points. They are compatible with IEEE 802.11a/b/g/n, Bluetooth and ZigBee applications, as well as other products that utilize ISM frequency bands. All wireless access point antennas are RoHS compliant. For high-volume orders, Pulse can custom design antennas for OEMs. This includes alternative frequencies and a variety of cables/connectors for antenna assemblies. Pulse also manufactures build-to-print internal antennas that feature a variety of stamped metal and PCB configurations. Single-Band 1, 2 Part Frequency Number Max Gain Mechanical (dBi) Length 3 Dual-Band 1, 2 W1063 900MHz 3.0 6.65 /169 ISM 868 & 915MHz W1038ES 900MHz 3.0 6.65 /169 ISM 868 & 915MHz W1010 4 2.4GHz 2.0 3.3/83 802.11b/g/n, Bluetooth, ZigBee W1030 2.4 GHz 2.0 3.25/82.5 802.11b/g/n, Bluetooth, ZigBee W1034 2.4 GHz 2.0 4.21/107 802.11b/g/n, Bluetooth, ZigBee W1037 2.4 GHz 3.2 6.65/169 802.11b/g/n, Bluetooth, ZigBee W1038 2.4 GHz 4.9 6.65/169 802.11b/g/n, Bluetooth, ZigBee W1027 2.4 GHz 3.2 4.88/124 802.11b/g/n, Bluetooth, ZigBee SB24003 2.4 GHz 2.14 2.5/132 802.11b/g/n, Bluetooth, ZigBee 1. Antennas come standard with R-SMA male connectors, unless otherwise specified. 2. These part numbers are lead-free and RoHS compliant. No additional suffix or identifier is required. 3. Inches/millimeters 4. SMA male connector 2 Part Max Gain Mechanical Frequency Number (dBi) Length 3 Application/Standard W1043 2.4 & 5.0 2.0 4.59/117 W1045 2.4 & 5.0 2.0 4.13/105 W1028 5.15 & 5.85 2.0 4.88/124 R380.500.314 2.4 & 4.9 & 5.8 1.6/5 7.15/1822 Application/Standard 802.11a/b/g/n, Bluetooth, ZigBee 802.11a/b/g/n, Bluetooth, ZigBee 802.11a/b/g/n, ISM 5.8GHz ISM 5.8 GHz, Public Safety, 4.9 GHz, 802.11b/g/n, Bluetooth, ZigBee 1. Antennas come standard with R-SMA male connectors, unless otherwise specified. 2. These part numbers are lead-free and RoHS compliant. No additional suffix or identifier is required. 3. Inches/millimeters www.pulseelectronics.com Pulse Jack *Antennas for Wireless Access Point table is continued on next page G003.Y (6/11) Electronics antennas Antennas for wireless devices (continued) Antennas for Wireless Access Point (continued) Single-Band Antenna with I-PEX Cable Assembly 1, 2 Cable Assembly 1 Part Number VSWR Insertion Loss 2.4 GHz/6 GHz 2.4 GHz/6 GHz Cable Length 2 Connector Types W9003 1.2/1.3 0.4 dB/0.8 dB 3/76 R-SMA Female to I-PEX W9006M 1.1/1.3 0.6 dB/1.1 dB 6/150 SMA Female to I-PEX W9009 1.2/1.4 0.8 dB/1.4 dB 9/229 R-SMA Female to I-PEX W9011M 1.2/1.2 0.9 dB/1.8 dB 11/280 SMA Female to I-PEX W9063B170 1.1/1.9 1.3 dB/2.4 dB 17/431 I-PEX to R-TNC Female 1. These part numbers are lead-free and RoHS compliant. No additional suffix or identifier is required. 2. Inches/millimeters Helical Antennas Part Mechanical Frequency Number 4 Length 3 Cable Length 3 Application Standard W1049B030 2.4GHz 3.25/82.5 3/76 802.11b/g/n, Bluetooth, ZigBee W1049B050 2.4GHz 3.25/82.5 5/127 802.11b/g/n, Bluetooth, ZigBee W1049B070 2.4GHz 3.25/82.5 7/178 802.11b/g/n, Bluetooth, ZigBee W1049B090 2.4GHz 3.25/82.5 9/229 802.11b/g/n, Bluetooth, ZigBee W1049B120 2.4GHz 3.25/82.5 12/305 802.11b/g/n, Bluetooth, ZigBee 1. Antennas DO NOT come with bushing holders. Order separately if required. Part Number: P4208-02A202 2. These part numbers are lead-free and RoHS compliant. No additional suffix or identifier is required. 3. Inches/millimeters 4. Max Gain (2 dBi) Internal and Surface Mount Antenna Solutions PCB Antenna Ceramic Antennas Pulse offers a wide range of standardized internal and surface mount antennas (SMD) for wireless device applications. Pulse ceramic technology results in robust antenna designs that have outstanding performance. These antennas have an inherent immunity to surrounding antenna signals and hand-effect, which makes them exceptionally suitable solutions for small hand-held devices with multiple antennas. Pulse helical antenna technology provides high-performance antennas in a small package that can be easily deployed. These ceramic and helical antennas require minimal ground plane removal for operation, which means saved board space and economical implementation. The SMD compatibility of Pulse's antenna products makes them simple and easy to mount. Surface Mount Antennas for Wireless Devic es 1, 2 Application/ Part Number Antenna Size 4 Mount Type 3 (mm) Frequency Range (MHz) RHCP Gain 5 (dBic) Max Gain (dBi) Efficiency (%/dB) Return Loss (dB MIN) Zigbee, ISM Monopole 2400, 868, 1575 7x1.6x1.6 SMD GC 11x6 -- 2.5 (peak) 75/-1.55 -18 Ceramic and other 6 W30006 Zigbee, ISM Monopole 2400 -- 1.5 (peak) 75/-1.25 -6 10x3.2x4mm SMD, GC 10.8x6.25 Ceramic and other W3001 6 WLAN 3,2 (peak) 70/-1,55 (peak) -8 Dualband SMD, 2400-2483.5 2,7 (band edges) 65/-1,85 (band edges) -- 10.0x3.2x1.5 Ceramic GC area 11.60x6.00 5150-5850 4,2 (peak) 80/-0,95 (peak) -10 W3006 3,0 (band edges) 70/-1,55 (band edges) Bluetooth SMD, 1,7 (peak) 70/-1,6 (peak) Ceramic 3.2x1.6x1.1 2400-2483.5 -- -8 GC area 4.00x4.25 0,7 (band edges) 55/-2,6 (band edges) W3008 Bluetooth/ WLAN/WiFi SMD, 2,2 (peak) 75/-1,3 (peak) -- 3.2x1.6x1.1 2400-2483.5 -11 Ceramic GC area 4.00x6.25 1,9 (band edges) 70/-1,6 (band edges) W3008c GPS SMD, 0.7 (peak) 3 (peak) 80/-1,25 (peak) Ceramic 10.0x3.2x4.0 1575.42 10 -10 GC area 10.80x6.25 0.3 (band edges) 2,5 (band edges) 70/-1,25 (band edges) W3009 Pulse Jack 1. All antennas are RoHS Compliant 2. Impedance 50 W, operating temperature -40C to +85C 3. GC = Ground Clearance, mm 4. Millimeters (mm) 5. -- = NA 6. Monopole antenna performance is linked to different tuning circuit recommendations for the variety of applications. Consult the data sheet for more information *Table for "SMD Antennas for Wireless Devices" continued on next page G003.Y (6/11) Electronics www.pulseelectronics.com 3 antennas Antennas for wireless devices (continued) Internal and Surface Mount Antenna Solutions (continued) Surface Mount Antennas for Wireless Devices 1, 2 (continued) Application/ Part Number Antenna Size 4 Mount Type 3 (mm) Frequency Range (MHz) RHCP Gain 5 (dBic) Max Gain (dBi) Efficiency (%/dB) Return Loss (dB MIN) GPS SMD, -0,2 (peak) 2,8 (peak) 75/-1,25 (peawk) Ceramic 10.0x3.2x2.0 1575.42 10 -18 GC area 10.80x6.25 - 0,7 (band edges) 2,3 (band edges) 70/-1,55 (band edges) W3010 GPS SMD 0.85 (peak) 3.4 (peak) 85/-0.7 (peak) Ceramic 3.2x1.6x1.1 -12 1575.42 10 4x4.25/6.25 0.5 (band edges) 3.0 (band edges) 80/-1.0 (band edges) W3011/A ISM 900 SMD 2 (peak) 70/- 1.55 (peak) Ceramic 10x3.2x4 868-870 -- -6 GC area 10.80x8.25 0.5 (band edges) 50/3 (band edges) W3012 ISM 900 Monopole SMD 868-870 -- 1.55 (peak) 45/- 4.5 (peak) -6 10x3.2x1.5 Ceramic GC area 40x16 W3014 6 ISM 868 SMD 1.4 (peak) 65/- 1.9 (peak) Ceramic 10x3.2x4 868-870 -- -10 GC area 10.80x8.25 1.4 (band edges) 65/1.9 (band edges) W3013 ISM 868 Monpole 10x3.2x4 "SMD GC 11.5x7 868-870 -- 1 (peak) "45/- 4.5 (peak) -10 Ceramic W3016 6 Satellite Radio SMD, - 0,1 (peak) 2,7 (peak) 80/-1,0 (peak) Ceramic 3.2x1.6x1.1 2320-2345 -12 GC area 4.00x4.25 - 0.6 (band edges) 2,4 (band edges) 75/-1,2 (band edges) W3017 DMB-S SMD, 3 (peak) 85/-0,7 (peak) Ceramic 3.2x1.6x1.1 2605-2655 -- -10 GC area 4.00x4.25 2,5 (band edges) 80 /-1 (band edges) W3018 WiMAX SMD, 2,8 (peak) 80/-1 (peak) Ceramic 3.2x1.6x1.1 2500-2690 -- - 5.5 GC area 4.00x6.25 1 (band edges) 60/-2,25 (band edges) W3020 DECT SMD 2.5 (peak) 80/-1 (peak) Ceramic 10x3.2x2 1800-1930 -- -12 GC area 10.60x7.25 2 (band edges) 70/-1.55 (band edges) W3022 MediaFLO SMD, 2 (peak) 75/1,25 (peak) Ceramic 10x3.2x4 716-722 -- -8 GC area 10.60x10.25 1,5 (band edges) 70 /-1,55 (band edges) W3024 1800 RX Diversity SMD, 2.5 (peak) 80/-1 (peak) Ceramic 10x3.2x2 GC area 10.60x6.25 1805-1880 -- 2 (band edges) 70/-1.55 band edges) -9 W3028 1900 RX Diversity SMD, 2 (peak) 80 /-1 (peak) Ceramic 10x3.2x2 1930-1990 -- -10 GC area 10.60x6.25 1.3 (band edges) 70/-1.55 band edges) W3029 2100 RX Diversity SMD, 2 (peak) 80/-1 (peak) Ceramic 10x3.2x2 -- -10 GC area 10.60x6.25 2110-2170 1.5 (band edges) 70/-1.55 band edges) W3030 850 RX Diversity SMD, 2.3 (peak) 75 /-1.25 (peak) Ceramic 10x3.2x4 869-894 -- -5.5 GC area 10.60x8.25 0.2 (band edges) 45/-3.5 band edges) W3031 900 RX Diversity SMD, 2 (peak) 65/-1.9 (peak) Ceramic 10x 3.2x4 925-960 -- -5 GC area 10.60x8.25 0 (band edges) 45/-3.5 band edges) W3032 Zigbee, ISM Monopole 3.2x1.6x1.1 SMD 2400, -- 4 (peak) 70/-1.55 (peak) -12 Ceramic GC area , 17x20 1575 and other W3043 6 850 RX Diversity SMD, 0 (peak) 55/-2.6 (peak) Helical Horizontal 12.4x8x2.5 869-894 -- -9 GC area 8.00x40.00 -1.3 (band edges) 40/-4 (band edges) W3117 Pulse Jack *Table for SMD Antennas for Wireless Devices continued on next page See table notes on next page. 4 www.pulseelectronics.com G003.Y (6/11) Electronics antennas Antennas for wireless devices (continued) Internal and Surface Mount Antenna Solutions (continued) Surface Mount Antennas for Wireless Devices 1, 2 (continued) Application/ Part Number Antenna Size 4 Mount Type 3 (mm) Frequency Range (MHz) RHCP Gain 5 (dBic) Max Gain (dBi) Efficiency (%/dB) Return Loss (dB MIN) 850 RX Diversity SMD, 0 (peak) 52/- 2.9 (peak) Helical Vertical 2.5x8x8 GC area 6.00x11.00 869-894 -- 1.4 (band edges) 38/-4.2 (band edges) -9 W3118A WiFi SMD, Helical 5.0x2.5x5.5 2400-2483.5 -- 1.5 50/-3 -8 GC area 7.50x5.50 W3108 GPS SMD, -2,1 (peak) 1,3 (peak) 47/-3,3 (peak) Helical 5.0x2.5x5.5 1575.42 10 -16 GC area 7.50x5.50 -2,4 (band edges) 0,7 (band edges) 43/-3,7 (band edges) W3110 ISM 0.9 (peak) 67/-1.7 (peak) SMD, Helical 2.5x8.0x8.0 902-928 -- -10 GC area 6.00x11.00 -0.3 (band edges) 50/-3 (band edges) W3112A ISM 0.8 (peak) 66 /-1.8 (peak) SMD, Helical 12.4x8.0x2.5 902-928 -- -0.3 (band edges) 51/-2.9(band edges) -10 GC area 8.00x40.00 W3113 DVB-H EU Clearance to ground -9 @ 470 Planar 45x6.6x5 470-750 -- -3 -- 5 mm -6 @ 750 W3510 DVB-H EU -4.5 @ 470 External 50.5x10.5x3.0 -- 470-750 -- -- -3 -3.5 @ 750 W3520 WCDMA SMD, 2.3 (peak) 80/-1 (peak) Ceramic10x3.2x2 1920-2170 -- -10 GC area 10.60x8.25 1.5 (band edges) 70/-1.55 (band edges) W3040 824-894 -1.0 - -2.5 880-960 -1.0 - -2.5 4-band GSM & 1710-1880 -2.0 - -3.5 -- -- W-CDMA 2100 40x8 x6 -- -6 1850-1990 -2.0 - -3.5 W3530 1920-1980 -3.0 - -3.5 2110-2170 -2.5 - -3.5 5. -- = NA 6. Monopole antenna performance is linked to different tuning circuit recommendations for the variety of applications. Consult the data sheet for more information 1. All antennas are RoHS Compliant 2. Impedance 50 W, operating temperature -40C to +85C 3. GC = Ground Clearance, mm 4. Millimeters (mm) Printed Circuit Board Antenna Solutions Application/ Standard Frequency Mechanical Dimensions (in/mm) Cable Length (mm) /Connector Type Gain 2 (dBi) Efficiency (%/B) W3501 GSM/GPRS 850/900/1800/1900 0.98 x 3.43 x .008 25 x 87 x 0.2 56/ I-PEX Connector 3.75 to 1.5 50 to 55 % W3502 GSM/GPRS 850/900/1800/1901 1.69 x 0.67 x 0.02 43 x 17 x 0.5 27.5/ I-PEX Connector 2 to 1 40 to 60 % W3525Bxxx WiFi 2.4 GHz 0.42 x 1.88 x .031 10.7 x 47.7 x 0.8 Various cable lenghts/ I-PEX Connector 2 70% W3513 WiFi 2.4 & 5 GHz 0.63 x 2.76 x 0.04 16 x 70 x 0.9 250/ I-PEXConnector 2 50 to 72 % Part Number 1 Pulse Jack 1. These part numbers are lead-free and RoHS compliant. No additional suffix or identifier is required. 2. 2 dBi max G003.Y (6/11) Electronics www.pulseelectronics.com 5 antennas Antennas for wireless devices (continued) Alternative Wireless Solutions Pulse offers a wide variety of alternative wireless solutions for applications including machine-to-machine, public safety, hand-held radios, and telematics. Alternative Frequency (MHz) Gain (dBi) Description Length (in/mm) R380.500.314 2400-2500/4900-5900 1.6/5 Swivel Mount Dipole SB450FME3 450-470 2.14 Stealth Blade SB8003 806-896 2.14 SB9003 890-960 Coax 1 Connector 1 7/177.8 -- RPTNC 10/254 3' RG-316 FME Stealth Blade 2.5/132 3' RG-174 No Conn 2.14 Stealth Blade 2.5/132 3' RG-174 No Conn 824-894/1850-1990 -- Center Fed Dipole, Articulating Right Angle 6.75/171 -- SMA SPWB23150 136-174 -- Wideband 6.75/171 -- SMA F T3 SPWH23832 782-882 -- Whip, Standard, 1/4 Wave 3/76 -- SMA F T3 SPWH23918 863-973 -- Whip, Standard, 1/4 Wave 3/76 -- SMA F T3 SPHS24832 800-864 -- Helical, Standard, 1/4 Wave 3/76 -- SMA F T2 SPDA17806/2170TNCLAR 806-960/1710-2170 5 Pentaband Swivel Mount Dipole 7.5/190.5 -- TNC Male W1920G0915 806-960/1710-2170 1.5 Stealth Blade 4.3/110 3' RG-174 SMA Male W1920G3658 806-960/1710-2170 1.5 Stealth Blade 4.3/110 9' RG-174 SMA Male Part Number SPDA24850/1900 1. UHF and VHF portable/terminal antennas also available. Infrastructure Solutions Single-Band Infrastructure Antennas Part Number Frequency (MHz) Gain Description (dBi) Length Coax 1 (in/mm) Connector 1 YA5900W 890-960 11 dBi Fully welded seven element Yagi 30/762 -- N Female YA6900W 890 - 960 8 dBi Fully welded four element Yagi 17.5/444.5 -- N Female OC806/2170TNCLAR 806 - 960/1710 - 2170 1.5/2.5 Pentaband Omni Ceiling 7 dia/177 dia 8" RG-405 TNC Male LP806/2170TNCLAR 806 - 960/1710 - 2170 0/1.5 Pentaband Low Profile 5.75 dia/146 dia 15' LMR-195 TNC Male RO806/2170TNCWA 806 - 960/1710 - 2170 4/4 Pentaband Radome Omni 16.5/419 -- TNC Male RO2408NF 2400 - 2500 8 Radome Omni 20/508 -- N Female RO2408NM 2400 - 2500 8 Radome Omni 20/508 -- N Male RO4910NF 4940 - 4990 10 Radome Omni 18/457 -- N Female RO4910NM 4940 - 4990 10 Radome Omni 18/457 -- N Male 1. Variety of Coax availble. Order separately. 6 Pulse Jack * Table for Single-Band Infrastructure Antennas, continued on next page. www.pulseelectronics.com G003.Y (6/11) Electronics antennas Antennas for wireless devices (continued) Infrastructure Solutions (continued) Single-Band Infrastructure Antennas (continues) Part Number Frequency (MHz) Gain Description (dBi) RO4910NF RO4910NM RO5810NM RO5210NF RO5210NM RO5810NF 4940 4940 5725 5150 5150 5725 4990 4990 5875 5350 5350 5875 10 10 10 10 10 10 R380.500.218 2400 - 2500 14 R380.700.203 5720-5820 20 - Length Coax 1 (in/mm) Radome Omni Radome Omni Radome Omni Radome Omni Radome Omni Radome Omni Planar Array Horizontal Polarization Planar Array Vertical Polarization 18/457 18/457 16.5/419 16.5v419 16.5/419 16.5/419 12/304.8 12/304.8 Connector 1 -- -- -- -- -- -- 8" Low-loss SHF-142 N Female N Male N Male N Female N Male N Female N Female 8" Low-loss SHF-142 N Female 1. Variety of Coax availble. Order separately. ANTENNAS FOR AUTOMOtiVE APPLICATIONS Pulse's antenna product line offers the highest quality, most reliable antennas in the automotive industry. Pulse antennas combine premium materials with high-efficiency designs, delivering antennas with superior mechanical durability and electrical performance. UV, chemical and impact resistant Makroblend (R) bases help ensure the highest performance for all your mobile applications. "traditional-style" mobile antennas are available from 27 MHz to 5.9 GHz, as well as many "multi-band" designs. Whether you need communication interoperability, radio communication, data transmission, increased cellular/PCS coverage or GPS tracking, these antennas are the solution. Vehicular Mount Single-Band Solutions Single-Band Part Number NMOWB150C NMO450C LP800NMO NMOQW900 GPSMM GPSDM GPSNMO EF2405NMO EF4905NMO NMO5E2400B NMO4E4900B W4000D197 W4000G197 W4000J197 W4000L197 1 Frequency (MHz) Gain (dBi) Description Length (in/mm) Coax 2 Connector 3 135-174 450-750 806-960 890-970 1575.4 1575.4 1575.4 2400-2500 4900-5000 2400-2500 4900-5350 1575.4 1575.4 1575.4 1575.4 2 5.6 2 2 5 dBic 5 dBic 5 dBic 5 5 5 4 1.5dBi/26dBi 1.5dBi/26dBi 1.5dBi/26dBi 1.5dBi/26dBi NMO Wide Band NMO UHF Field Tunable NMO Low Profile NMO 1/4 Wave GPS Magnetic Mount GPS Direct Mount GPS NMO Mount NMO Mount Elevated Feed NMO Mount Elevated Feed NMO Whip NMO Whip Glass mount Glass mount Glass mount Glass mount 51.75 /1314 33/838 1.25/32 3/76 1.7/43 2.5 dia/63.5 2.9 dia/73.66 13/260.4 10/254 8.54/ 217 4.5 /114.30 1.97x1.18/50x30 oval 1.97x1.18/50x30 oval 1.97x1.18/50x30 oval 1.97x1.18/50x30 oval -- -- -- -- RG-174 RG-174 -- -- -- -- -- RG-174 RG-174 RG-174 RG-174 -- -- -- -- -- -- -- -- -- -- -- MMCX SMA MCX FME Pulse Jack 1. Antennas available in multiple frequencies and mounting options. 2. Variety of coax available. Order separately. G003.Y (6/11) Electronics 3. Variety of connectors available. Order separately. 4. All NMO antennas require an NMO mount for installation. www.pulseelectronics.com 7 antennas ANTENNAS FOR AUTOMOtiVE APPLICATIONS (continued) Vehicular Mount Multi-Band Solutions Multi-Band 1 Part Number Frequency (MHz) Gain (dBi) Description Length (in/mm) NMO150/450/800 50-165/450-470/806-940 -7/0/1 NMO Tri Band 4 MMC/P3EFME 824-960/1850-1990 4/4 Dual Band Magnetic Mount 4 NMOC/P3E 824-960/1850-1990 4/4 Dual Band NMO Mount GPSCW1502 136-174/1575.4 2.14/5 dBic Direct Feed Dual Band VHF/GPS Combi Whip Coax 2 Connector 3 16.5/419 -- -- 5/127 RG-58 Low Loss Dual Shield FME 4.7/119 -- -- 22/558.8 RG-174 SMA/SMB GPSCW450 406-512/1575.4 2.14/5 dBic Direct Feed Dual Band UHF/GPS Combi Whip 6.5/165.1 RG-174 -- GPSCW3E800 806-896/175.4 5/5 dBic Direct Feed Dual Band GSM/GPS Combi Whip 11.5/292.1 RG-174 -- GPSCW3E900 890-960/1575.4 2.14/5 dBic Direct Feed Dual Band GSM/GPS Combi Whip 10.25/260.4 RG-174 -- GPSCPOO 824-960/1710-2170/1575.42 2/2/5 dBic Direct Feed GPS Tri Band 7.6/193 RG-174 -- GPSCWCPOO 824-960/1710-2170/1575.42 2/2/5 dBic Any NMO mount antenna Dependent on plus GPS antenna/5dBic Roof Mount GPS Tri Band 3.9/99 -- Direct Feed NMO Mount with GPS 202/5130.8 RG-174 RG-58/RG-174 (GPS) NMOHFGPS 1. Antennas available in multiple frequencies and mounting options. 2. Variety of coax available. Order separately. __ 3. Variety of connectors available. Order separately. 4. All NMO antennas require an NMO mount for installation NMO Mounting NMO Mounting Kits 1 Part Number Description Cable Length Coax Type Connector NMOKHFUD NMO Low/High Frequency Mount 17/5.18 RG-58/U Dual Shield, Low Loss Cablew NO CONN NMOKHFUDTHK NMO Low/High Frequency Thick Mount 17/5.18 RG-58/U Dual Shield, Low Loss Cable NO CONN NMOMMRNOCONN NMO Low/High Frequency Magnetic Mount 12/3.66 RG-58 A/U cable NO CONN NMOHFGPSNOCONN Any NMO mount antenna plus GPS RG-58 /RG-174(GPS) NO CONN 202/5130.8 1. All NMO mounting kits are available with a variety of cables and connectors. Pulse Jack 8 www.pulseelectronics.com G003.Y (6/11) Electronics