P1055/16-CL005 - ALPHA - Datasheet.Directory

Fuses UMT 250

https://www.schurter.com /PG01_2

Circuit Protection

Surface Mount Fuse, 3 x 10.1 mm, Time-Lag T, 250 VAC, 125 VDC

See below:

Approvals and Compliances

IEC 60127-4 · 250 VAC · 125 VDC · Time-Lag T

Description

- High current range from 80 mA to 10 A

- High breaking capacity of 200 A @ 250 VAC (IEC)

- UL approval for 277 VAC and 250 VDC

- Impermeable to potting compound used to achieve hermetic seal for

use in intrinsically safe applications according to ATEx and IECEx re-

quirements.

Unique Selling Proposition

- Compact design

- Maximum breaking capacity at minimal footprint

- Suitable for pulse-shaped continuous currents

Applications

- Primary protection on SMD PCBs

- Medical equipment

- Battery protection

References

Packaging Details

Fuse Kit Fuse Kit UMT 250 / UMZ 250

Weblinks

pdf data sheet, html datasheet, General Product Information, Packaging

details, Distributor-Stock-Check, Detailed request for product, Microsite

Application Note Primary Protection in Equipmentwith further information on increased Pulse Strength and their test conditions according to inter-

national standards see Impulse Withstand Voltage

Technical Data

Rated Voltage 250 VAC, 125 VDC

Rated current 0.08 - 10 A

Breaking Capacity 35 A - 200 A

Characteristic Time-Lag T

Mounting PCB,SMT

Admissible Ambient Air Temp. -55 °C to 125 °C

Climatic Category 55/125/21 acc. to IEC 60068-1

Material: Housing Ceramics

Material: Terminals Tin-Plated Copper Alloy

Unit Weight 0.23 g

Storage Conditions 0 °C to 60 °C, max. 70% r.h.

Product Marking , Rated current, Voltage, Cha-

racteristic, Breaking Capacity

Soldering Methods Reflow, Wave

Soldering Profile

Solderability 245 °C / 3 sec acc. to IEC 60068-2-58,

Test Td

Resistance to Soldering Heat 260 °C / 40 sec acc. to IPC/JEDEC J-

STD-020D, 1 cycle

Moisture Sensitivity Level MSL 1, J-STD-020

Flammability min. UL 94V-1

(acc. to EIA/IS-722, Test 4.12)

Operational Life MIL-STD-202, Method 108

(1000h @ 0.42*In @ 70°C)

Moisture Resistance Test MIL-STD-202, Method 106E

(50 cycles in a temp./mister chamber)

Mechanical Shock MIL-STD-202, Method 213 Condition A

Resistance to Solvents MIL-STD-202, Method 215

Terminal Strength MIL-STD-202, Method 211A

(Deflection of board 1 mm for 1 minute)

Approvals and Compliances

Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about

Approvals

SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national

and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF

16949, medical technology according to ISO 13485 or in the aerospace industry can be offered exclusively with customer-specific, individual agree-

ments by SCHURTER.

Fuses

UMT 250 https://www.schurter.com /PG01_2

Circuit Protection

Approvals

The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products.

Approval Reference Type: UMT 250

Approval Logo Certificates Certification Body Description

VDE Approvals VDE VDE Certificate Number: 40013121

UL Approvals UL UL File Number: UR E41599, UL E300707

CQC Approvals CQC CQC Certificate Number: CQC11012062827

KTL Approvals KTL Korea Testing Laboratory

METI Approvals METI Japan Electrical Safety and Environment technology Laboratories

Product standards

Product standards that are referenced

Organization Design Standard Description

Designed according to IEC 60127-4/2 Miniature fuses. Part 4. Universal modular fuse-links for through-hole and

surface mount types

Designed according to UL 248-14 Low voltage fuses - Part 14: Additional fuses

Designed according to CSA22.2 No. 248.14 Low-Voltage Fuses - Part 14: Supplemental Fuses

Application standards

Application standards where the product can be used

Organization Design Standard Description

Designed for applications acc. IEC/UL 60950 IEC 60950-1 includes the basic requirements for the safety of information

technology equipment.

Compliances

The product complies with following Guide Lines

Identification Details Initiator Description

CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable

requirements laid down in the harmonisation of Community legislation on

its affixing in accordance with EU Regulation 765/2008.

RoHS SCHURTER AG Directive RoHS 2011/65/EU, Amendment (EU) 2015/836

China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March

2007. It is similar to the EU directive RoHS.

REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration,

Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as

"REACH") entered into force.

SCHURTER AG Universal Modular Fuse meets the standard IEC 60127-4

AEC

Q200

Automotive SCHURTER AG AEC-Q200 is a test standard for passive components used in automotive

applications. SCHURTER tests components according to the customer's

agreement and is certified according to IATF 16949.

Fuses UMT 250

https://www.schurter.com /PG01_2

Circuit Protection

Dimension [mm] 10.1 mm

10.1

1.6

0.4

1.43

6.5

3.75

Soldering pads

Pre-Arcing Time

Rated Current In 1.0 x In min. 1.25 x In min. 2.0 x In max. 10.0 x In min. 10.0 x In max.

0.08 A - 6.3 A - 60 min 120 s 10 ms 100 ms

8 A - 10 A 4 h - 120 s 10 ms 100 ms

Time-Current-Curves

Time in Seconds

0.1

0.0001

0.001

0.01

100

1000

10000

.1 1

1 1

80 mA

100 mA

125 mA

160 mA

200 mA

250 mA

315 mA

400 mA

500 mA

630 mA

800 mA

1 A

1.25 A

1.6 A

2 A

2.5 A

3.15 A

4 A

5 A

6.3 A

10 A

8 A

Current in Amperes

All Variants

Rated Cur-

rent [A]

Rated Vol-

tage [VAC]

Rated Vol-

tage [VDC]

Breaking

Capacity

Voltage Drop

1.0 In max.

[mV]

Voltage Drop

1.0 In typ.

[mV]

Power Dissi-

pation 1.25 In

max [mW]

Melting I²t

10.0 In typ.

[A²s]

Order Number

0.08 250 125 1) 1300 1030 200 0.022 l l l l 3403.0155.11 █

0.08 250 125 1) 1300 1030 200 0.022 l l l l 3403.0155.24 █

0.1 250 125 1) 1300 870 200 0.04 l l l l 3403.0156.11

0.1 250 125 1) 1300 870 200 0.04 l l l l 3403.0156.24

0.125 250 125 1) 1000 700 200 0.055 l l l l 3403.0157.11

0.125 250 125 1) 1000 700 200 0.055 l l l l 3403.0157.24

Fuses

UMT 250 https://www.schurter.com /PG01_2

Circuit Protection

Rated Cur-

rent [A]

Rated Vol-

tage [VAC]

Rated Vol-

tage [VDC]

Breaking

Capacity

Voltage Drop

1.0 In max.

[mV]

Voltage Drop

1.0 In typ.

[mV]

Power Dissi-

pation 1.25 In

max [mW]

Melting I²t

10.0 In typ.

[A²s]

Order Number

0.16 250 125 1) 1000 540 240 0.057 l l l l 3403.0158.11

0.16 250 125 1) 1000 540 240 0.057 l l l l 3403.0158.24

0.2 250 125 1) 1000 460 500 0.092 l l l l 3403.0159.11

0.2 250 125 1) 1000 460 500 0.092 l l l l 3403.0159.24

0.25 250 125 1) 800 395 500 0.2 l l l l 3403.0160.11 █

0.25 250 125 1) 800 395 500 0.2 l l l l 3403.0160.24 █

0.315 250 125 1) 750 343 500 0.27 lll l l 3403.0161.11 █

0.315 250 125 1) 750 343 500 0.27 lll l l 3403.0161.24 █

0.4 250 125 1) 700 290 500 0.4 lll l l 3403.0162.11 █

0.4 250 125 1) 700 290 500 0.4 lll l l 3403.0162.24 █

0.5 250 125 1) 600 257 500 0.54 lll l l 3403.0163.11 █

0.5 250 125 1) 600 257 500 0.54 lll l l 3403.0163.24 █

0.63 250 125 1) 500 216 500 1.1 lll l l 3403.0164.11 █

0.63 250 125 1) 500 216 500 1.1 lll l l 3403.0164.24 █

0.8 250 125 1) 400 190 500 1.4 lll l l 3403.0165.11 █

0.8 250 125 1) 400 190 500 1.4 lll l l 3403.0165.24 █

1 250 125 2) 300 164 500 2.8 llllll3403.0166.11 █

1 250 125 2) 300 164 500 2.8 llllll3403.0166.24 █

1.25 250 125 2) 300 138 1000 4.5 llllll3403.0167.11 █

1.25 250 125 2) 300 138 1000 4.5 llllll3403.0167.24 █

1.6 250 125 2) 300 124 1000 6.9 llllll3403.0168.11 █

1.6 250 125 2) 300 124 1000 6.9 llllll3403.0168.24 █

2 250 125 2) 300 102 1000 7.3 llllll3403.0169.11 █

2 250 125 2) 300 102 1000 7.3 llllll3403.0169.24 █

2.5 250 125 2) 300 90 1200 7.5 llllll3403.0170.11 █

2.5 250 125 2) 300 90 1200 7.5 llllll3403.0170.24 █

3.15 250 125 2) 300 95 1500 14 llllll3403.0171.11 █

3.15 250 125 2) 300 95 1500 14 llllll3403.0171.24 █

4 250 125 2) 300 78 2000 26 llllll3403.0172.11

4 250 125 2) 300 78 2000 26 llllll3403.0172.24

5 250 125 3) 300 76 2500 38 l llll3403.0173.11

5 250 125 3) 300 76 2500 38 l llll3403.0173.24

6.3 250 125 3) 300 71 3000 66 l llll3403.0174.11

6.3 250 125 3) 300 71 3000 66 l llll3403.0174.24

8 250 125 4) 220 72 3000 113 l l 3403.0175.11

8 250 125 4) 220 72 3000 113 l l 3403.0175.24

10 250 125 4) 220 73 3500 166 l l 3403.0176.11

10 250 125 4) 220 73 3500 166 l l 3403.0176.24

█ Most Popular.

Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER

1) IEC: 200 A @ 250 VAC, p.f. ≥ 0.95 / 100 A @ 125 VDC

1) UL: 200 A @ 277 VAC / 100 A @ 125 VDC / 35 A @ 250 VDC / 200 A @ 63 VAC/DC

2) IEC: 200 A @ 250 VAC, p.f. ≥ 0.95 / 100 A @ 125 VDC

2) UL: 200 A @ 277 VAC / 100 A @ 125 VDC / 35 A @ 250 VDC / 200 A @ 63 VAC/DC

2) PSE: 100 A @ 250 VAC

3) IEC: 100 A @ 250 VAC, p.f. ≥ 0.95 / 100 A 125 VDC

3) UL: 100 A @ 250 VAC / 100 A @ 125 VDC / 35 A @ 250 VDC / 200 A @ 63 VAC/DC

3) PSE: 100 A @ 250 VAC

4) UL: 35 A @ 250 VAC / 35 A @ 125 VDC / 200 A @ 63 VAC/DC

4) PSE: 100 A @ 250 VAC

Fuses UMT 250

https://www.schurter.com /PG01_2

Circuit Protection

Rated Cur-

rent [A]

Rated Vol-

tage [VAC]

Rated Vol-

tage [VDC]

Breaking

Capacity

Voltage Drop

1.0 In max.

[mV]

Voltage Drop

1.0 In typ.

[mV]

Power Dissi-

pation 1.25 In

max [mW]

Melting I²t

10.0 In typ.

[A²s]

Order Number

The 80 mA variant may not be to replace the 80 mA used with gold caps UMT (Au).

Packaging Unit .xx = .11 Plastic Bag (100 pcs.)

.xx = .24 Blister Tape 33 cm Reel (2000 pcs.)

The specifications, descriptions and illustrations indicated in this document are based on current

information. All content is subject to modifications and amendments. Information furnished is believed

to be accurate and reliable. However, users should independently evaluate the suitability and test each

product selected for their own applications.

13.06.2019