HD74LS158 Quadruple 2-line-to-1-line Data Selectors / Multiplexers (inverted outputs) REJ03D0443-0200 Rev.2.00 Feb.18.2005 This data selector / multiplexer contains inverters and drivers to supply full on-chip data selection to the four output gates. A separate strobe input is provided. A 4-bit word is selected from one of two sources and is routed to the four outputs. Then, outputs present inverted data to minimize propagation delay time. Features * Ordering Information Part Name Package Type Package Code (Previous Code) Package Abbreviation Taping Abbreviation (Quantity) HD74LS158FPEL SOP-16 pin (JEITA) PRSP0016DH-B (FP-16DAV) FP EL (2,000 pcs/reel) Note: Please consult the sales office for the above package availability. Pin Arrangement Select 1 16 VCC S 1A 2 1A G 15 S 1B 3 1B 4A 14 4A 1Y 4 1Y 4B 13 4B 2A 5 2A 4Y 12 4Y 2B 6 2B 3A 11 3A 2Y 7 2Y 3B 10 3B GND 8 9 3Y Inputs Output Inputs Output 3Y Inputs Output Inputs Output (Top view) Function Table Inputs Strobe Select H X L L L L L H L H H ; high level, L ; low level, X ; irrelevant Rev.2.00, Feb.18.2005, page 1 of 5 A X L H X X B X X X L H Output Y H H L H L HD74LS158 Block Diagram 1A 1Y 1B 2A Data Inputs 2Y 2B Outputs 3A 3Y 3B 4A 4Y 4B Strobe G Select S Absolute Maximum Ratings Item Symbol Ratings Unit Supply voltage VCC 7 V Input voltage VIN 7 V Power dissipation PT 400 mW Tstg -65 to +150 C Storage temperature Note: Voltage value, unless otherwise noted, are with respect to network ground terminal. Recommended Operating Conditions Item Supply voltage Output current Operating temperature Rev.2.00, Feb.18.2005, page 2 of 5 Symbol Min Typ Max Unit VCC 4.75 5.00 5.25 V IOH -- -- -400 A IOL -- -- 8 mA Topr -20 25 75 C HD74LS158 Electrical Characteristics (Ta = -20 to +75 C) Item Input voltage Symbol VIH VIL min. 2.0 -- typ.* -- -- max. -- 0.8 Unit V V VOH 2.7 -- -- V -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 0.4 0.5 40 20 -0.8 -0.4 0.2 0.1 Output voltage VOL Input current G, S A, B G, S A, B G, S A, B IIH IIL II V Condition VCC = 4.75 V, VIH = 2 V, VIL = 0.8 V, IOH = -400 A IOL = 4 mA VCC = 4.75 V, VIH = 2 V, VIL = 0.8 V IOL = 8 mA A VCC = 5.25 V, VI = 2.7 V mA VCC = 5.25 V, VI = 0.4 V mA VCC = 5.25 V, VI = 7 V Short-circuit output -20 -- -100 mA IOS current Supply current** ICC -- 4.8 8 mA Input clamp voltage VIK -- -- -1.5 V Notes: * VCC = 5 V, Ta = 25C ** ICC is measured with all outputs open and all inputs at 4.5 V. VCC = 5.25 V VCC = 5.25 V VCC = 4.75 V, IIN = -18 mA Switching Characteristics (VCC = 5 V, Ta = 25C) Item Propagation delay time Symbol tPLH tPHL tPLH tPHL tPLH tPHL Rev.2.00, Feb.18.2005, page 3 of 5 Inputs Output Data Y Strobe Y Select Y min. -- -- -- -- -- -- typ. 7 7 11 12 13 16 max. 12 12 17 18 20 24 Unit Condition ns ns ns CL = 15 pF, RL = 2 k HD74LS158 Testing Method Test Circuit VCC 4.5V Output RL 1A 1B 2A 2B 3A 3B 4A 4B See Function Table Input P.G. Zout = 50 1Y CL Output 2Y Same as Load Circuit 1. Output 3Y Same as Load Circuit 1. G S Output 4Y Notes: Load circuit 1 Same as Load Circuit 1. 1. CL includes probe and jig capacitance. 2. All diodes are 1S2074(H). Waveform tTHL tTLH 90% 1.3 V Input 3V 90% 1.3 V 10% 10% 0V tPHL tPLH VOH In phase output 1.3 V 1.3 V VOL tPHL tPLH VOH Out of phase output 1.3 V 1.3 V VOL Note: Input pulse; tTLH 15 ns, tTHL 6 ns, PRR = 1 MHz, duty cycle 50% Rev.2.00, Feb.18.2005, page 4 of 5 HD74LS158 Package Dimensions JEITA Package Code P-SOP16-5.5x10.06-1.27 RENESAS Code PRSP0016DH-B *1 Previous Code FP-16DAV MASS[Typ.] 0.24g NOTE) 1. DIMENSIONS"*1 (Nom)"AND"*2" DO NOT INCLUDE MOLD FLASH. 2. DIMENSION"*3"DOES NOT INCLUDE TRIM OFFSET. D F 16 9 c HE *2 E bp Index mark Reference Symbol Terminal cross section ( Ni/Pd/Au plating ) 1 Z *3 bp Nom D 10.06 E 5.50 Max 10.5 A2 8 e Dimension in Millimeters Min x A1 M 0.00 0.10 0.20 0.34 0.40 0.46 0.15 0.20 0.25 7.80 8.00 2.20 A L1 bp b1 c A c A1 y L Detail F 1 0 HE 7.50 1.27 e x 0.12 y 0.15 0.80 Z 0.50 L L Rev.2.00, Feb.18.2005, page 5 of 5 8 1 0.70 1.15 0.90 Sales Strategic Planning Div. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Keep safety first in your circuit designs! 1. Renesas Technology Corp. puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap. Notes regarding these materials 1. These materials are intended as a reference to assist our customers in the selection of the Renesas Technology Corp. product best suited to the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corp. or a third party. 2. Renesas Technology Corp. assumes no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. 3. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Renesas Technology Corp. without notice due to product improvements or other reasons. It is therefore recommended that customers contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. Renesas Technology Corp. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Renesas Technology Corp. by various means, including the Renesas Technology Corp. Semiconductor home page (http://www.renesas.com). 4. When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Renesas Technology Corp. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. 5. Renesas Technology Corp. semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life is potentially at stake. Please contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor when considering the use of a product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use. 6. The prior written approval of Renesas Technology Corp. is necessary to reprint or reproduce in whole or in part these materials. 7. If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and cannot be imported into a country other than the approved destination. Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited. 8. Please contact Renesas Technology Corp. for further details on these materials or the products contained therein. http://www.renesas.com RENESAS SALES OFFICES Refer to "http://www.renesas.com/en/network" for the latest and detailed information. Renesas Technology America, Inc. 450 Holger Way, San Jose, CA 95134-1368, U.S.A Tel: <1> (408) 382-7500, Fax: <1> (408) 382-7501 Renesas Technology Europe Limited Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K. Tel: <44> (1628) 585-100, Fax: <44> (1628) 585-900 Renesas Technology Hong Kong Ltd. 7th Floor, North Tower, World Finance Centre, Harbour City, 1 Canton Road, Tsimshatsui, Kowloon, Hong Kong Tel: <852> 2265-6688, Fax: <852> 2730-6071 Renesas Technology Taiwan Co., Ltd. 10th Floor, No.99, Fushing North Road, Taipei, Taiwan Tel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999 Renesas Technology (Shanghai) Co., Ltd. Unit2607 Ruijing Building, No.205 Maoming Road (S), Shanghai 200020, China Tel: <86> (21) 6472-1001, Fax: <86> (21) 6415-2952 Renesas Technology Singapore Pte. Ltd. 1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632 Tel: <65> 6213-0200, Fax: <65> 6278-8001 (c) 2005. Renesas Technology Corp., All rights reserved. Printed in Japan. Colophon .2.0