Series 805
www.glenair.com E-Mail: sales@glenair.com
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
H-8
© 2014 Glenair, Inc. Series 80 Mighty Mouse U.S. CAGE Code 06324 Printed in U.S.A.
Dimensions in Inches (millimeters) are subject to change without notice.
H
Two Shell Styles: Integral platform for
direct shield attachment using Band-
Master™ ATS termination system, or
accessory thread for attaching a strain
relief.
EMI Ground Spring Achieves low shell-
to-shell resistance. This nickel-plated
beryllium copper spring enables the
Series 805 to meet greater than 60 dB
shielding eectiveness from 100 MHz
to 15 GHz.
Ratchet Design for Secure Coupling
Series 805 connectors feature a spring
mechanism in the coupling nut that
locks into radial teeth on the plug
barrel. This feature allows the Series 805
to stay mated even when under high
vibration, without the need for safety
wire or torque tools.
Series 805 Mighty Mouse
Triple-Start ACME Thread Plug
805-001 and 805-002 Ordering Information
How To Order
Sample Part Number 805001 16 M 84 P A
Series (See Table I) 805-001 = Plug with Banding Platform
805-002 = Plug with Accessory Thread
Shell Style -16 = Plug Connector with Ratcheting Anti-Decoupling Mechanism
Shell Material and Finish
C = Aluminum / Black Anodize (Non-Conductive); RoHS Compliant
M = Aluminum / Electroless Nickel; RoHS Compliant
MT = Aluminum / Nickel-PTFE RoHS Compliant
NF = Aluminum / Cadmium with Olive Drab Chromate
ZN = Aluminum / Zinc-Nickel with Olive Drab Chromate
ZNU = Aluminum / Zinc-Nickel with Black Chromate
Z1 = Stainless Steel / Passivated; RoHS Compliant
Shell Size - Insert
Arrangement See Contact Arrangements Page H-2
Contact Type
Connector supplied with contacts Connector supplied without contacts
P = Pin A = Pin Connector, less contacts
S = Socket B = Socket Connector, less contacts
Connector with contacts are supplied with signal and/or power crimp contacts.
These contacts are not installed.
Coaxial contacts and non-standard signal contacts are ordered separately.
Shell Key Positions
(See Table II) A = Normal B = Pos. B C = Pos. C D = Pos. D E = Pos. E F = Pos. F
Table I: Series
-
Plug with Banding Platform
-
Plug with Accessory Thread
Table II: Key Positions
Key Position Key Rotation
A°
B°
A B
Normal (A) ° °
B ° °
C ° °
D ° °
E ° °
F ° °