TUBULAR WIREWOUND RESISTORS 12 WATT to 1300 WATT T SERIES RoHS RESISTORSCAPACITORSCOILSDELAY LINES h Term.W is RoHS compliant & 260C compatible H I.D. D Widest range in the industry! High performance for low cost Tolerances to 0.1%, an RCD exclusive! Low inductance version available (specify opt.'X') For improved stability /reliability, T Series is available with 24 hour burn-in (specify opt.'EQ') L Standard Series T: Tubular design enables high power at low cost. Specialty high-temp flame resistant silicone ceramic coating holds wire securely against ceramic core providing optimum heat transfer and precision performance (enabling resistance tolerances to 0.1%). OPTIONAL STYLES: .38" T12 .66" T20T225 .25" .25 -.75" typ .125" T12 .16" T20-50 .2" T50S-225 .2 -.5" typ M N P Opt. M: Assembled with Thru-Bolt Brackets Option G: Male Quick-Connect 1/4 x .031" thick [6 x .8mm] male tab Small models are mounted 1/4" above mounting plane, medium 1/2", large 3/4". Mounting kit (2 slotted brackets, insulators, threaded rod, nuts & washers) may be purchased separately, specify T50-BRACKET, T80-BRACKET, etc. Option J: Push-In Bracket (12W - 225W) Units are supplied with pre-assembled push-in slotted brackets. Brackets may be purchased separately, specify T50-PIB, T80-PIB, etc. (order 2 brackets for each resistor) 123456789012 123456789012 123456789012 Option L: Insulated Leads Stranded wire is soldered to lug terminals and insulated with shrink tubing. Also available ring terminal (Opt LR), quick-connect male (LM), female (LF), and various others. .040 x 2" Option V: Adjustable Exposed winding enables adjustment of res.value. Slider divides wattage rating proportionally. Available on edgewound and standard winding. Do not over-tighten. Resistance Range* Option T: Tapped Single or multi-tapped units avail. Power rating is reduced by 10% per tap. Indicate resistance value and wattage required per section when ordering. Dimensions, typ. Opt. A: Axial Lead (illustrated) Opt. R: Radial Lead Lead wires are attached to lug terminals to enable soldering direct to PCB. The resistor body can be supported by leads up to 25W size. Inch[mm] Option M (Mounting Bracket) RCD Type Wattage Rating Standard Adjustable (Opt.V) L D I.D. (min) H h M N P T12 T20S T25 T50 T50S T75 T80 T100 T150 T175 T225 T300 T500 T600 T750 T1000 T1300 12 20 25 50 50 75 80 100 150 175 225 300 500 600 750 1K W 1.3KW 0.1 - 10K 0.1 - 15K 0.1 - 20K 0.1 - 40K 0.1 - 40K 0.1 - 50K 0.1 - 60K 0.1 -100K 0.1 -130K 0.13-150K 0.16-165K 0.4-220K 0.5-250K 0.8 -300K 0.8 -400K 1 - 500K 1 - 750K 0.1 - 3K 0.1 - 4K 0.1 - 6K 0.1 - 12K 0.1 - 12K 0.1 - 16K 0.1 - 18K 0.1 - 30K 0.1 -40K 0.13 -45K 0.16 -50K 0.4 - 66K 0.5 - 75K 0.8 - 90K 0.8 -120K 1 - 150K 1 - 200K 1.76 [45] 2.0 [50] 2.0 [50] 4.0 [102] 3.55 [90] 6.0 [152.4] 4.4 [112] 6.4 [163] 7.7 {195] 8.5 [215] 10.5 [267] 10.1 [257] 13 [330] 15.6 [396] 18.1 [460] 21.3 [540] 25.6 [650] .55 [14] .55 [14] .7 [18] .7 [18] 1.1 [28] .7 [18] 1.1 [28] 1.1 [28] 1.2 [30] 1.2 [30] 1.2 [30] 1.7 [43] 2.1 [53] 2.1 [53] 2.1 [53] 2.5 [63] 2.7 [69] .2 [5] .2 [5] .3 [8] .3 [8] .5 [13] .3 [8] .5 [13] .5 [13] .63 [16] .63 [16] .63 [16] 0.9 [23] 1.2 [30] 1.2 [30] 1.2 [30] 1.4[35] 1.4 [35] .4 [10] .4 [10] .48 [12] .48 [12] .67 [17] .48 [12] .67 [17] .67 [17] .75 [19] .75 [19] .75 [19] 1.0 [25] 1.0 [25] 1.0 [25] 1.0 [25] 1.15 [30] 1.15 [30] .08 [2] .08 [2] .08 [2] .08 [2] .16 [4.0] .08 [2] .16 [4.0] .16 [4.0] .16 [4.0] .16 [4.0] .16 [4.0] .18 [4.5] .18 [4.5] .18 [4.5] .18 [4.5] .22 [5.5] .22 [5.5] 2.15 [55] 2.6 [65] 2.68 [68] 4.72 [120] 5.12 [130] 6.69 [170] 6.00 [152] 8.00 [202] 9.25 [235] 10 [254] 12 [305] 11.8 [300] 15.1 [383] 17.7 [450] 20.1 [510] 23.4 [595] 27.6 [702] 2.6 [65] 3.0 [76] 3.2 [80] 5.2 [132] 5.8 [147] 7.2 [182] 6.7 [171] 8.5 [216] 10 [254] 10.6 [269] 12.6 [321] 13 [329] 16 [406] 18.5 [470] 21.1 [535] 24.2 [615] 30 [762] .12 [3] .12 [3] .16 [4] .16 [4] .22 [5.5] .16 [4] .22 [5.5] .22 [5.5] .22 [5.5] .24 [6] .24 [6] .31 [8] .35 [9] .35 [9] .35 [9] .35 [9] .35 [9] * Extended range available SPECIFICATIONS Standard Tolerance Temp. Coefficient Dielectric Strength Overload Operating Temp. Derating Temperature Rise P/N DESIGNATION: 1 and above: 5% (avail. to 0.1%), Below 1: 10% (avail. to 1%) 260ppm/C 1 and above, 400ppm/C 0.1 to 0.99 (avail. to 20ppm) 1000 VAC (terminal to mounting bracket) 10x rated power for 5 sec. -55C to +350C .31%/C above 25C 250 - 325C @full rated W T225 - 1R00 - F B W RCD Type Options: X, V, T, R, M, L, J, G, EQ, A (leave blank for standard) Resis.: 4-digit code for 0.1%-1% (3 signif. figures & multiplier), e.g. R100=0.1, 1R00=1, 1001=1K. 3-digit code for 2%-10% (2 signif. figures & multiplier), e.g. R10=0.1, 1R00=1, 1000=100, 1001=1K Tolerance: K=10%, J=5%, H=3%, F=1%, D=.5%, C=.25%, B=.1% Packaging: B = Bulk (standard) Termination: W= Pb-free, Q= SnPb (leave blank if either is acceptable) RCD Components Inc, 520 E.Industrial Park Dr, Manchester, NH, USA 03109 rcdcomponents.com Tel: 603-669-0054 Fax: 603-669-5455 Email:sales@rcdcomponents.com FA027B Sale of this product is in accordance with GF-061. Specifications subject to change without notice. 50