Widest range in the industry!
High performance for low cost
Tolerances to ±0.1%, an RCD exclusive!
Low inductance version available (specify opt.’X’)
For improved stability /reliability, T Series is available
with 24 hour burn-in (specify opt.’EQ’)
TUBULAR WIREWOUND RESISTORS
12 WATT to 1300 WATT
* Extended range available
T SERIES
Option T: Tapped
Single or multi-tapped units avail.
Power rating is reduced by 10%
per tap. Indicate resistance value
and wattage required per section
when ordering.
Option L: Insulated Leads
Stranded wire is soldered to lug
terminals and insulated with shrink
tubing. Also available ring terminal
(Opt LR), quick-connect male (LM),
female (LF), and various others.
Opt. A: Axial Lead (illustrated)
Opt. R: Radial Lead
Lead wires are attached to lug
terminals to enable soldering direct
to PCB. The resistor body can be
supported by leads up to 25W size.
Option V: Adjustable
Exposed winding enables
adjustment of
res.value. Slider divides wattage
rating proportionally. Available on
edgewound and standard winding.
Do not over-tighten.
Option G: Male Quick-Connect
1/4 x .031” thick [6 x .8mm] male tab Opt. M: Assembled with Thru-Bolt Brackets
Small models are mounted ≈1/4” above mounting plane,
medium ≈1/2”, large ≈3/4”. Mounting kit (2 slotted brackets,
insulators, threaded rod, nuts & washers) may be purchased
separately, specify T50-BRACKET, T80-BRACKET, etc.
M
NP
Standard Series T: Tubular design enables high power at
low cost. Specialty high-temp flame resistant silicone
ceramic coating holds wire securely against ceramic core
providing optimum heat transfer and precision perfor-
mance (enabling resistance tolerances to 0.1%).
.25”
Option J: Push-In Bracket (12W - 225W)
Units are supplied with pre-assembled push-in
slotted brackets. Brackets may be purchased
separately, specify T50-PIB, T80-PIB, etc.
(order 2 brackets for each resistor)
.25 -.75” typ
SPECIFICATIONS
DCR epyT egattaW gnitaR
*egnaRecnatsiseR]mm[hcnI.pyt,snoisnemiD )tekcarBgnitnuoM(MnoitpO
dradnatS elbatsujdA )V.tpO( LD.D.I)nim(Hh M N P
21T211.0 ΩK01-1.0 ΩK3-]54[67.1]41[55.]5[2.]01[4.]2[80.]55[51.2]56[6.2]3[21.
S02T021.0 ΩK51-1.0 ΩK4-]05[0.2]41[55.]5[2.]01[4.]2[80.]56[6.2]67[0.3]3[21.
52T521.0 ΩK02-1.0 ΩK6-]05[0.2]81[7.]8[3.]21[84.]2[80.]86[86.2]08[2.3]4[61.
05T051.0 ΩK04-1.0 ΩK21-]201[0.4]81[7.]8[3.]21[84.]2[80.]021[27.4]231[2.5]4[61.
S05T051.0 ΩK04-1.0 ΩK21-]09[55.3]82[1.1]31[5.]71[76.]0.4[61.]031[21.5]741[8.5]5.5[22.
57T571.0 ΩK05-1.0 ΩK61-]4.251[0.6]81[7.]8[3.]21[84.]2[80.]071[96.6]281[2.7]4[61.
08T081.0 ΩK06-1.0 ΩK81-]211[4.4]82[1.1]31[5.]71[76.]0.4[61.]251[00.6]171[7.6]5.5[22.
001T0011.0 ΩK001-1.0 ΩK03-]361[4.6]82[1.1]31[5.]71[76.]0.4[61.]202[00.8]612[5.8]5.5[22.
051T0511.0 ΩK031-1.0 ΩK04-]591{7.7]03[2.1]61[36.]91[57.]0.4[61.]532[52.9]452[01]5.5[22.
571T57131.0 ΩK051-31.0 ΩK54-]512[5.8]03[2.1]61[36.]91[57.]0.4[61.]452[01]962[6.01]6[42.
522T52261.0 ΩK561-61.0 ΩK05-]762[5.01]03[2.1]61[36.]91[57.]0.4[61.]503[21]123[6.21]6[42.
003T0034.0 ΩK022-4.0 ΩK66-]752[1.01]34[7.1]32[9.0]52[0.1]5.4[81.]003[8.11]923[31]8[13.
005T0055.0 ΩK052-5.0 ΩK57-]033[31]35[1.2]03[2.1]52[0.1]5.4[81.]383[1.51]604[61]9[53.
006T0068.0 ΩK003-8.0 ΩK09-]693[6.51]35[1.2]03[2.1]52[0.1]5.4[81.]054[7.71]074[5.81]9[53.
057T0578.0 ΩK004-8.0 ΩK021-]064[1.81]35[1.2]03[2.1]52[0.1]5.4[81.]015[1.02]535[1.12]9[53.
0001TWK11ΩK005-1ΩK051-]045[3.12]36[5.2]53[4.1]03[51.1]5.5[22.]595[4.32]516[2.42]9[53.
0031TWK3.11ΩK057-1ΩK002-]056[6.52]96[7.2]53[4.1]03[51.1]5.5[22.]207[6.72]267[03]9[53.
ecnareloTdradnatS 1Ω,)%1.0±ot.liava(%5±:evobadna 1woleB ±:Ω 01 %)%1±ot.liava(
tneiciffeoC.pmeT 1C°/mpp062 Ω,evobadna
°/mpp0041.0C Ω99.0ot Ω)mpp02ot.liava(
htgnertScirtceleiD)tekcarbgnitnuomotlanimret(CAV0001
daolrevO.ces5rofrewopdetarx01
.pmeTgnitarepO55-C°053+otC°
gnitareDC°52evobaC°/%13.
pmeTerutareesiR ≈C°523-052Wdetarlluf@
.38” T12
.66” T20-
T225
.2 -.5” typ .125” T12
.16” T20-50
.2” T50S-225
FA027B Sale of this product is in accordance with GF-061. Specifications subject to change without notice.
RoHS
Term.W is
RoHS
compliant
& 260°C
compatible
123456789012
123456789012
123456789012
.040 x 2”
OPTIONAL STYLES:
RCD C omponents I nc, 520 E.Industrial Park Dr, Manchester, NH, USA 03109 rcdcomponents.com Tel: 603-669-0054 Fax: 603-669-5455 Email:sales@rcdcomponents.com
RESISTORSCAPACITORS
C
OILSDELAY
LINES
D
H
L
h
I.D.
↓↓
↓↓
↓
↑↑
↑↑
↑
50
P/N DESIGNATION: T225 - 1R00 - F B W
RCD Type
Options: X, V, T, R, M, L, J, G, EQ, A
(leave blank for standard)
Resis.: 4-digit code for 0.1%-1% (3 signif. figures
& multiplier), e.g. R100=0.1Ω, 1R00=1Ω, 1001=1KΩ.
3-digit code for 2%-10% (2 signif. figures & multiplier),
e.g. R10=0.1Ω, 1R00=1Ω, 1000=100Ω, 1001=1K
Tolerance: K=10%, J=5%, H=3%, F=1%, D=.5%, C=.25%, B=.1%
Packaging: B = Bulk (standard)
Termination: W= Pb-free, Q= SnPb (leave blank if either is acceptable)
