TS117L Multifunction Telecom Switch Load Voltage Load Current Max RON TS117L 350 120 35 Description TS117L is a 350V, 120mA, 35 1-Form-A relay with an optocoupler in a single package. It provides high sensitivity and is an ideal solution for many telecom applications. Current limiting version is available ("L" suffix). Units V mA Features * Small 8 Pin DIP Package * Low Drive Power Requirements (TTL/CMOS Compatible) * No Moving Parts * High Reliability * Arc-Free With No Snubbing Circuits * 3750VRMS Input/Output Isolation * FCC Compatible * VDE Compatible * No EMI/RFI Generation * Machine Insertable, Wave Solderable * Surface Mount and Tape & Reel Versions Available Approvals * UL Recognized: File Number E76270 * CSA Certified: File Number LR 43639-10 * BSI Certified: * BS EN 60950:1992 (BS7002:1992) Certificate #:7344 * BS EN 41003:1993 Certificate #:7344 Ordering Information Applications * Telecommunications * Telecom Switching * Tip/Ring Circuits * Modem Switching (Laptop, Notebook, Pocket Size) * Hookswitch * Dial Pulsing * Ground Start * Ringer Injection * Instrumentation * Multiplexers * Data Acquisition * Electronic Switching * I/O Subsystems * Meters (Watt-Hour, Water, Gas) * Medical Equipment-Patient/Equipment Isolation * Security * Aerospace * Industrial Controls DS-TS117L-R4.0 Part # TS117L TS117PL TS117PLTR TS117LS TS117LSTR Description 8 Pin DIP (50/Tube) 8 Pin Flatpack (50/Tube) 8 Pin Flatpack T&R (1000/Reel) 8 Pin Surface Mount (50/Tube) 8 Pin Surface Mount T&R (1000/Reel) Pin Configuration TS117L Pinout + LED - Relay - LED - Relay Collector - Phototransistor Emitter - Phototransistor www.clare.com 1 8 2 7 3 6 4 5 Load - Relay (MOSFET Output) Load - Relay (MOSFET Output) LED - Phototransistor -/+ LED - Phototransistor +/- 1 TS117L Absolute Maximum Ratings (@ 25 C) Parameter Input Power Dissipation Input Control Current Peak (10ms) Reverse Input Voltage Total Power Dissipation Isolation Voltage Input to Output Operational Temperature Storage Temperature Soldering Temperature DIP Package Flatpack/Surface Mount Package (10 Seconds Max.) 1 Derate Linearly 1.33 mw/C 2 Derate Linearly 6.67 mw/C Min - Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this data sheet is not implied. Exposure of the device to the absolute maximum ratings for an extended period may degrade the device and effect its reliability. Typ Max Units - 1501 mW 50 mA 1 A 5 V - 8002 mW 3750 -40 -40 - VRMS +85 C +125 C - - +260 C - - +220 C Electrical Characteristics Parameter Conditions Relay Portion (Pins 7, 8) Output Characteristics @ 25C Load Voltage (Peak) Load Current (Continuous) Peak Load Current 10ms On-Resistance IL=120mA Off-State Leakage Current VL=350V Switching Speeds Turn-On IF=5mA, VL=10V Turn-Off IF=5mA, VL=10V Output Capacitance 50V; f=1MHz Load Current Limit Relay Portion (Pins 1, 2) Input Characteristics @ 25C Input Control Current IL=120mA Input Dropout Current Input Voltage Drop IF=5mA Reverse Input Voltage Reverse Input Current VR=5V 2 Symbol Min Typ Max Units VL IL ILPK RON ILEAK - 30 - 350 120 35 1 V mA mA A TON TOFF COUT ICL 130 25 170 3.0 3.0 210 ms ms pF mA IF IF VF VR IR 2 0.4 0.9 - 0.7 1.2 - 50 1.4 5 10 mA mA V V A www.clare.com Rev. 4.0 TS117L Electrical Characteristics (Continued) Parameter Conditions Detector Portion (Pins 3,4) Output Characteristics @ 25C Phototransistor Blocking Voltage IC=10A Phototransistor Output Current VCE=5V, IF=0mA Saturation Voltage IC=2mA, IF=16mA Current Transfer Ratio IF=6mA, VCE=0.5V Detector Portion (Pins 5,6) Input Characteristics @ 25C Input Control Current IC=2mA, VCE=0.5V Input Voltage Drop IF=5mA Input Current IC=1A, VCE=5V (Detector must be off) Input to Output Capacitance (Relay Only) Capacitance Input to Output Input to Output Isolation - Rev. 4.0 Symbol Min Typ Max Units BVCEO ICEO VSAT CTR 20 33 50 50 0.3 100 500 0.5 - V nA V % IF VF IF 6 0.9 5 2 1.2 25 100 1.4 - mA V A CI/O VI/O 3750 3 - - pF pF VRMS www.clare.com 3 TS117L PERFORMANCE DATA* TS117L Typical On-Resistance Distribution (N=50 Ambient Temperature = 25C) (Load Current = 120mADC; IF = 2mADC) Device Count (N) 25 20 15 10 35 35 30 30 25 20 15 10 5 5 0 0 1.3625 1.4875 1.6125 1.7375 17.0 17.4 17.8 18.2 18.6 10 376.25 382.75 389.25 395.75 402.25 408.75 415.25 19.0 Blocking Voltage (V) TS117L Typical IF for Switch Dropout (N=50 Ambient Temperature = 25C) (Load Current = 120mADC) TS117L Typical Turn-On Time (N=50 Ambient Temperature = 25C) (Load Current = 120mADC; IF = 2mADC) 25 30 20 20 25 15 10 5 0 Device Count (N) 25 Device Count (N) 15 10 5 0.45 0.75 1.05 1.35 1.65 1.95 0.75 1.05 1.35 1.65 1.95 2.25 0.15 180 Load Current (mA) 30 25 20 15 10 100 10mA 5mA 2mA 80 60 0 -20 0 TS117L Typical Blocking Voltage vs. Temperature 20 40 60 80 100 Turn-On (ms) 370 -40 60 80 100 0 20 40 60 80 TS117L Typical Turn-Off vs. Temperature (Load Current = 120mADC) 100 0.7 2mA 0.6 1.2 1.0 0.8 0.6 5mA 10mA 20mA 0.4 0.5 0.4 2mA 0.3 0.2 0.1 5mA 0 0 40 -20 TS117L Typical Turn-On vs. Temperature (Load Current = 120mADC) 0.2 360 0.006 Temperature (C) 1.4 380 0.008 0.002 120 1.6 390 0.010 Temperature (C) Turn-Off (ms) 400 0.75 0.004 -40 410 0.65 40 0 420 0.55 0.012 120 20 0.025 0.075 0.125 0.175 0.225 0.275 0.325 0.45 0.014 140 5 20 0.35 TS117L Typical Leakage vs. Temperature (Measured across Pins 7 & 8) 160 Temperature (C) 0.25 Turn-On (ms) TS117L Typical Load Current vs. Temperature 35 0 10 LED Current (mA) TS117L Typical Turn-Off Time (N=50 Ambient Temperature = 25C) (Load Current = 120mADC; IF = 2mADC) -20 15 0 0.45 2.25 LED Current (mA) -40 20 5 0 Leakage (A) Device Count (N) 15 On-Resistance () TS117L Typical IF for Switch Operation (N=50 Ambient Temperature = 25C) (Load Current = 120mADC) Device Count (N) 20 0 1.8625 LED Forward Voltage Drop (V) Blocking Voltage (VRMS) 25 5 Turn-Off (ms) Device Count (N) 30 TS117L Typical Blocking Voltage Distribution (N=50 Ambient Temperature = 25C) Device Count (N) 35 TS117L Typical LED Forward Voltage Drop (N=50 Ambient Temperature = 25C) IF = 5mADC -40 -20 0 20 40 60 Temperature (C) 80 100 120 -40 -20 0 20 40 60 80 100 Temperature (C) * The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.clare.com Rev. 4.0 TS117L PERFORMANCE DATA* TS117L Typical Turn-On vs. LED Forward Current (Load Current = 120mADC) TS117L Typical LED Forward Voltage Drop vs. Temperature Turn-On (ms) 1.6 1.4 50mA 30mA 20mA 10mA 5mA 1.2 1.0 0.9 0.40 0.8 0.35 0.7 0.30 Turn-Off (ms) LED Forward Voltage Drop (V) 1.8 0.6 0.5 0.4 0.3 0.2 0 20 40 60 80 100 120 0 5 10 15 20 25 30 35 40 45 0.15 0.10 0 50 LED Forward Current (mA) TS117L Typical On-Resistance vs. Temperature (Load Current = 120mADC; IF = 2mADC) TS117L Typical IF for Switch Operation vs. Temperature (Load Current = 120mADC) 3.5 3.0 3.0 20 LED Current (mA) 3.5 50 30 2.5 2.0 1.5 1.0 0.5 0 -20 0 20 40 60 80 100 -20 0 Load Current (A) 50 0 -50 -100 -150 -4 -3 -2 -1 0 1 20 40 60 80 2 3 4 30 35 40 45 50 2.0 1.5 1.0 100 -40 -20 0 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 10s 100s 1ms 10ms 100ms 20 40 60 80 100 Temperature (C) TS117L Typical Current Limiting vs. Temperature TS117L Energy Rating Curve 100 25 2.5 Temperature (C) TS117L Typical Load Current vs. Load Voltage (Ambient Temperature = 25C) IF = 2mADC 20 0 -40 Temperature (C) 150 15 0.5 0 400 350 300 Current (mA) -40 10 TS117L Typical IF for Switch Dropout vs. Temperature (Load Current = 120mADC) 60 40 5 LED Forward Current (mA) Temperature (C) 10 250 200 150 100 50 0 1s -40 10s 100s -20 0 20 40 60 80 100 Time Temperature (C) TS117L Typical Normalized CTR vs. Forward Current (VCE = 0.5V) TS117L Typical Normalized CTR vs. Temperature (VCE = 0.5V) TS117L Typical Collector Current vs. Forward Current (VCE = 0.5V) 4.5 8 12 4.0 7 10 Normalized CTR (%) Load Voltage (V) 3.5 3.0 2.5 2.0 1.5 1.0 6 4 3 2 0.5 1 0 0 0 2 4 6 8 10 12 IF (mA) 14 16 18 20 8 5 -40 -20 0 20 40 60 Temperature (C) 1mA 2mA 5mA 10mA 15mA 20mA 80 100 120 IC (mA) Load Current (mA) 0.20 0 0 LED Current (mA) On-Resistance () -20 0.25 0.05 0.1 0.8 -40 Normalized CTR (%) TS117L Typical Turn-Off vs. LED Forward Current (Load Current = 120mADC) 6 4 2 0 0 2 4 6 8 10 12 14 16 18 20 IF (mA) * The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. Rev. 4.0 www.clare.com 5 TS117L MECHANICAL DIMENSIONS 9.652 .381 (.380 .015) 8 Pin DIP Through Hole (Standard) 2.540 .127 8-.800 DIA. (.100 .005) (8-.031 DIA.) 2.540 .127 (.100 .005) 7.620 .254 (.300 .010) 7.239 TYP. (.285) PC Board Pattern (Top View) 3.302 (.130) 9.144 .508 (.360 .020) 6.350 .127 (.250 .005) 9.144 TYP. (.360) .457 .076 (.018 .003) 7.620 .127 (.300 .005) 8.077 .127 (.318 .005 ) 9.652 .381 (.380 .015) 8 Pin DIP Surface Mount ("S" Suffix) 4.445 .127 (.175 .005) 3.302 (.130) .254 TYP. (.010) (.100 .005) 9.525 .254 (.375 .010) 6.350 .127 (.250 .005) .635 TYP. (.025) PC Board Pattern (Top View) 2.540 .127 2.540 .127 (.100 .005) 7.620 .254 (.300 .010) 8.305 .127 (.327 .005) 1.905 .127 (.075 .005) .457 .076 (.018 .003) 1.498 .127 (.059 .005) 8.077 .127 (.318 .005) 9.652 .381 (.380 .015) 2.540 .127 (.100 .005) 8 Pin Flatpack ("P" Suffix) 2.159 TYP. (.085) PC Board Pattern (Top View) 2.540 .127 (.100 .005) 7.620 .254 (.300 .010) 2.286 MAX. .635 .127 (.090) (.025) 7.620 .127 (.300 .005) 6.350 .127 (.250 .005) 6.350 .127 (.250 .005) 9.398 .127 (.370 .005) .203 (.008) 8.763 .127 (.345 .005) 1.193 (.047) .457 .076 (.018 .003) 8.077 .127 (.318 .005) .787 (.031) Dimensions mm (inches) 6 www.clare.com Rev. 4.0 TS117L MECHANICAL DIMENSIONS Tape and Reel Packaging for 8 Pin Surface Mount Package 330.2 DIA. (13.00) 6.731 MAX. 1.753 .102 (.265) (.069 .004) .406 MAX. (.016) Top Cover Tape Thickness .102 MAX. (.004) 2.007 .102 1.498 .102 3.987 .102 (.079 .004) (.059 .004) (.157 .004) 7.493 .102 (.295 .004) 1 8 12.090 (.476) 10.300 (.405) 4.877 (.192) Top Cover Tape Embossed Carrier 16.002 .305 (.630 .012) .050R TYP. 11.989 .102 (.472 .004) 10.300 .102 (.405 .004) 1.549 .102 (.061 .004) User Direction of Feed Embossment Tape and Reel Packaging for 8 Pin Flatpack Package 330.2 DIA. (13.00) Top Cover Tape Thickness .102 MAX. (.004) 6.731 MAX. 1.753 0.102 (.265) (.069 .004) .406 MAX. (.016) 2.007 .102 1.498 .102 3.987 .102 (.079 .004) (.059 .004) (.157 .004) 7.493 .102 (.295 .004) 1 8 12.090 (.476) 10.287 (.405) 4.877 (.192) Top Cover Tape Embossed Carrier Embossment 16.002 .305 (.630 .012) .050R TYP. 11.988 .102 (.472 .004) 10.287 .102 (.405 .004) 1.549 .102 (.061 .004) User Direction of Feed Dimensions mm (inches) Rev. 4.0 www.clare.com 7 Worldwide Sales Offices CLARE LOCATIONS EUROPE ASIA/PACIFIC Clare Headquarters 78 Cherry Hill Drive Beverly, MA 01915 Tel: 1-978-524-6700 Fax: 1-978-524-4900 Toll Free: 1-800-27-CLARE European Headquarters CP Clare nv Bampslaan 17 B-3500 Hasselt (Belgium) Tel: 32-11-300868 Fax: 32-11-300890 Clare Micronix Division 145 Columbia Aliso Viejo, CA 92656-1490 Tel: 1-949-831-4622 Fax: 1-949-831-4628 France Clare France Sales Lead Rep 99 route de Versailles 91160 Champlan France Tel: 33 1 69 79 93 50 Fax: 33 1 69 79 93 59 Asian Headquarters Clare Room N1016, Chia-Hsin, Bldg II, 10F, No. 96, Sec. 2 Chung Shan North Road Taipei, Taiwan R.O.C. Tel: 886-2-2523-6368 Fax: 886-2-2523-6369 SALES OFFICES AMERICAS Americas Headquarters Clare 78 Cherry Hill Drive Beverly, MA 01915 Tel: 1-978-524-6700 Fax: 1-978-524-4900 Toll Free: 1-800-27-CLARE Eastern Region Clare 603 Apache Court Mahwah, NJ 07430 Tel: 1-201-236-0101 Fax: 1-201-236-8685 Toll Free: 1-800-27-CLARE Central Region Clare Canada Ltd. 3425 Harvester Road, Suite 202 Burlington, Ontario L7N 3N1 Tel: 1-905-333-9066 Fax: 1-905-333-1824 Western Region Clare 1852 West 11th Street, #348 Tracy, CA 95376 Tel: 1-209-832-4367 Fax: 1-209-832-4732 Toll Free: 1-800-27-CLARE Canada Clare Canada Ltd. 3425 Harvester Road, Suite 202 Burlington, Ontario L7N 3N1 Tel: 1-905-333-9066 Fax: 1-905-333-1824 Germany Clare Germany Sales ActiveComp Electronic GmbH Mitterstrasse 12 85077 Manching Germany Tel: 49 8459 3214 10 Fax: 49 8459 3214 29 Italy C.L.A.R.E.s.a.s. Via C. Colombo 10/A I-20066 Melzo (Milano) Tel: 39-02-95737160 Fax: 39-02-95738829 http://www.clare.com Sweden Clare Sales Comptronic AB Box 167 S-16329 Spanga Tel: 46-862-10370 Fax: 46-862-10371 United Kingdom Clare UK Sales Marco Polo House Cook Way Bindon Road Taunton UK-Somerset TA2 6BG Tel: 44-1-823 352541 Fax: 44-1-823 352797 Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare's Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of Clare's product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice. Specification: DS-TS117L-R4.0 (c)Copyright 2001, Clare, Inc. All rights reserved. Printed in USA. 8/16/01