IPT Series Bayonet Lock Connectors IPT 06 A...PHM_ _EMI67 Straight Plug Connector with Backshell for EMI Shield Termination IPT G 06 A 18-11 S Z C PHM18EMI67 XX MIL-C-26482 Bayonet Mod Code Options See Table II Grounding Finger (Omit for Standard) PHM Thread Size See Table I 06 - Straight Plug Contact Type C - Crimp (Omit for Solder Cup) Connector Class A - Non-Environmental Alternate Insert Rotation (Omit for Normal) Shell Size and Insert Arrangement Contact Gender P - Pin S - Socket B C G APPLICATION NOTES 1. Straight plug and backshell with PHM cable clamp suitable for sheilded cables. Rubber sleeves included to allow use of different diameter shielded cables. 2. Connector Class "A" (environmental)- -no grommet supplied. Note PHM connector accessory provides environmental sealing to IP67. 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. A broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber. (c) 2008 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 E-Mail: sales@glenair.com B-78 www.glenair.com IPT Series Bayonet Lock Connectors IPT 06 A...PHM_ _EMI67 Straight Plug Connector with Backshell for EMI Shield Termination TABLE I: DIMENSIONS Shell size 8 P.N. PHM B min. - max. D Max. G Max L Max. 7 2-7 15.0 19.05 75 10 9 2-9 21.0 21.80 75 12 11 2 - 11 24.0 26.20 85 14 11 2 - 11 24.0 29.40 85 16 11 2 - 11 24.0 32.55 85 18 11 / 18 2 - 11 / 9 - 16.5 42.0 35.35 100 20 18 9 - 16.5 42.0 38.90 100 22 18 9 - 16.5 42.0 42.10 100 24 18 / 22 / 24 9 - 16.5 / 15 - 20 / 19 - 24 42.0 45.10 100 TABLE II: MODIFICATION CODES Shell Finish (Omit for Standard Cad/Olive Drab Finish) Assembly with Accessories (Omit for Standard Version) F2 - Bright Nickel Plating (RoHs) Key Polarization (Omit for N version) W, X, Y, Z = Alternates F6 - Black Electrodeposited Paint (RoHs) N0 - Connector Less Backshell F7 - Black Zn-Co Plating (RoHs) NXXX - Custom Designed Connector F8 - Olive Drab Zn-Co Plating STANDARD FINISHES (For QQ-A-591 Aluminum Shells) Requirements IAW RoHS Not IAW RoHS G3 Cadmium with Olive F8 Zinc Cobalt with F2 Electrolytic Nickel F6 Black Non Conductive F7 Black Conductive Drab Passivation Olive Drab Passivation Thermal Shock Salt Spray After Thermal Shock Electical Conductivity Abrasion Resistance (c) 2008 Glenair, Inc. -40C + 100C -55C + 125C -55C + 125C -55C + 125C -40C + 100C 24 hour 500 hour 500 hour 500 hour 200 hour Very Good Very Good NO Very Good Very Good Good Very Good Very Good Good Good U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 E-Mail: sales@glenair.com B-79 www.glenair.com