Electromechanical Relays
Hasco Component's electromechanical relays range from less than an amp to 80 amps. Hasco's
relays are UL and CSA with some TUV ratings. All relays have DC coils and many have an AC coil.
They come sealed for wave soldering and washing thereby allowing the relays to be put on any
assemble line. There are surface mount low current relays available as well.
DPDT— DIP PC STANDARD OR SENSITIVE 2.0 AMP
BIFURCATED CONTACT RELAY
DIMENSIONS
PART NUMBERS
Home | About Hasco | Our Factory | Reed Relays | Electromechanical Relays | Reed
Switches/Magnets | Proximity Reed Switches | EZ Relay Design Page | Request Quote | Hasco Reps
Hasco Distributors | Site Map
File E75887
File LR49291
FEATURES
Sensitive available.
Fully sealed.
COIL RATINGS FOR STANDARD CAS 112
Relay
Code
(V)
Contact
Arrange -
ment
Nom.
Volt.
(VDC)
Coil
Resist.
(Ohms
+/-10%)
Nom.
Curr.
(mA)
Pick-
Up
Volt.
(VDC)
Drop-
Out
Volt.
(V)
Max.
Volt.
(VDC)
Nom.
Pwr (W)
Cons’p-
tion
CAS-112-5
DPDT
(2 Form C)
5 45 111.0 3.8 0.25 7.8
Approx.
0.55
CAS-112-6 6 70 90.9 4.5 0.3 9.7
CAS-112-9 9 160 85.7 6.75 0.45 13.5
CAS-112-12 12 280 43.1 9.0 0.6 19.4
CAS-112-24 24 1070 22.4 18.0 1.2 37.6
CAS-112-48 48 4300 11.1 36.0 2.4 74.2
Data Measured at 20°C
COIL RATINGS FOR SENSITIVE CS 212
Relay
Code
(V)
Contact
Arrange -
ment
Nom.
Volt.
(VDC)
Coil
Resist.
(Ohms
+/-10%)
Nom.
Curr.
(mA)
Pick-
Up
Volt.
(VDC)
Drop-
Out
Volt.
(V)
Max.
Volt.
(VDC)
Nom.
Pwr (W)
Cons’p-
tion
CS-212-3
DPDt
(2 Form C)
3 69 43.4 2.25 0.24 9.0 0.13
CS-212-5 5 167 29.9 3.8 0.4 15.0 0.15
CS-212-6 6 240 25.0 4.5 0.48 18.0 0.15
CS-212-9 9 540 16.7 6.8 0.72 27.0 0.15
CS-212-12 12 960 12.5 9.0 0.96 35.6 0.15
CS-212-18 18 2160 8.3 13.5 1.44 53.4 0.15
CS-212-24 24 3840 6.3 18.0 1.92 70.1 0.15
CS-212-48 48 7680 6.5 36.0 3.84 76.8 0.30
The tolerance is ±10% for the resistance value, pull-in voltage and drop-out voltage. The values are at ambient
temperature, 20°C.
RATING PERFORMANCE
Specifications Note
Contact
Contact
Arrangement DPDT, 2 Form C
Contact Material Gold-clad, Ag-Pd alloy
Contact Max. 100 mOhms at initial value
Max. Switching Power DC 30W
AC 50 VA
at resistive load
Max. Switching Voltage 125VDC
150VAC
Max. Switching Current 2A 30VDC
0.6 / 125 VAC
2.5A @ 12V
Time
Operate
Time
(Type CS) Approx. 5 msec.
(Type
CAS) Approx. 5 msec.
Release
Time
(Type CS) Approx. 3 msec.
(Type
CAS) Approx. 5 msec.
Bounce Time (Operating) Approx. 0.5 to 1 msec.
Bounce Time (Releasing)
Approx. 02.5 to 3
msec.
Insulation
Resistance 100 M Ohms at 500 VAC, 25°C, 50% relative
humidity
Dielectric Strength 1000VAC Between coil and contacts
1000VAC Between open contacts CAS, CS
FCC Surge Strength 1500V Between coil and contacts
Between Adjacent contacts CS
Vibration Resistance 10g (10 - 55 Hz)
Temperature -25°C ~ +75°C
-25°C ~ +85°C CAS, CS
Life Mechanical Life 2 x 107 times
Electrical Life 2 x 106 times at 20mV 1KHz 1mA resistive load
Weight 5 g
CAS112DC5 CS212DC6
CAS112DC6 CS212DC9
CAS112DC9 CS212DC12
CAS112DC12 CS212DC24
CAS112DC24 CS212DC48
CAS112DC48 CS212DC48B
CS212DC5
Electromechanical Relay - DPDT Relay- DPDT 2 Amp Relay
© 2010 Hasco Relays and Electronics International Corp.
