HIGH FREQUENCY DEVICES COAXIAL CONNECTORS SMT, MICROMINIATURE FSC Series FEATURES High engagement and high reliability with new structure Ultra-miniature for high density mounting (11.6mm2) Ultra-low profile (3.0mm max.) SMD and reflow solderable Tape and reel packaging Mountable by automatic placer High performance (VSWR: 1.2 max. at 3GHz) Available with ultra-thin FEP coaxial cables (0.8mm dia.) APPLICATIONS Portable, mobile and cordless telephone, GPS, any other microwave radio and measurement equipment, high-end workstations PART NUMBERING - RECEPTACLE SPECIFICATIONS Part Number Packaging Quantity MM7329-2700 Bulk package Specify MM7329-2700TB1 178mm Dia. Taping 1000pcs/reel MM7329-2700TB2 330mm Dia. Taping 4000pcs/reel PART NUMBERING - CABLE ASSEMBLY Item Rating and Characteristics Frequency From DC to 3GHz VSWR 1.2 max. Nominal Impedance 50 Temperature Range -40C to +90C Voltage 250Vrms Contact Resistance 15m max. Withstand Voltage 300VAC rms Insulation Resistance 500M min. Mating Cycles 50 cycles DIMENSIONS (MM7329-2700): mm FK 81 XX 200 0 2.4 3.4 Connector 0.5 FG FSC type Plug connector for 76 cable FK FSC type Plug connector for 81 cable XX No connector : Hot Terminal TOLERANCES UNLESS OTHERWISE SPECIFIED: 0.2 0.5 Cable code Code : Earth Terminal 1.5 Code 3.4 Cable assembly Connector code for each end of cable 1 2.4 MX DIMENSIONS (MXFK81 ): mm (MXFG76 ) Outer Cable Diameter Outer Conductor Construction 76 0.8D 1.25mm Single shield 81 0.4D 0.8mm Single shield Minimum Bending Radius Insulation Material 6mm FEP or PFA 4.8mm FEP or PFA TOLERANCES UNLESS OTHERWISE SPECIFIED: 0.3 2.2 2.4 2.4 318 3.8 M Full length of cable assembly Length L (mm) = x10 Ex. 500mm = 500x10 0 = 5000 1000mm = 100x10 1 = 1001 CG01-J HIGH FREQUENCY DEVICES COAXIAL CONNECTORS SMT, MICROMINIATURE FSC Series MATERIALS AND FINISH MM7329-2700 - RECEPTACLE CABLE LENGTH TOLERANCE Part Name Materials Finish Center Contact Copper Alloy Gold plated Outer Contact Copper Alloy Gold plated Insulator Engineering Plastic None L MXFK81 - CONNECTOR MXFG76 - CONNECTOR Part Name Materials Finish Center Contact Copper Alloy Gold plated Outer Contact Copper Alloy Gold plated Insulator Engineering Plastic None Cable Length L (mm)* From To 40 100 100 500 500 1000 1000 Dimensional Tolerance (mm) 3 4 10 +2% of L -0% of L -- *L must be 40mm min. DIMENSIONS OF PLASTIC TAPE: mm Hot Terminal 4 0.1 2 0.1 8 0.1 0.3 0.05 12 0.2 1.5 0.1 5.5 0.1 1.75 0.1 Feeding direction 3.8 3.8 0.1 1.5 or more 1.92 0.05 TOLERANCES UNLESS OTHERWISE SPECIFIED: 0.1 HIGH FREQUENCY DEVICES RECOMMENDED MOUNTING DIMENSIONS: mm DIMENSIONS: mm 5.2 4.2 3.4 2.4 1 .6 0 3 max. 2.5 Profile 0.9 3.4 2.57 LAND 1.5 1.5 ELECTRODE 4.2 min. 1.74 Match 50ohm including the land pattern. * The material P.C.B. is the epoxy resin of glass fabric base (r = 4.8). Thickness is 1.0mm. * The solder resist should be printed except for the land pattern on the P.C.B. CG01-J Clearance for mating 319 HIGH FREQUENCY DEVICES COAXIAL CONNECTORS SMT, MICROMINIATURE FSC Series APPLICATION NOTES Stress limit to the connector: When connected, stress to the connector should be limited as shown in Fig. 1. PCB mounting pattern dimensions: Dimensions shown on page 323 "Recommended Mounting Dimensions" should be used for PCB design. Disengagement and engagement: Use tool P/N M19000. The connector to be disengaged and engaged should be pulled out or insert to the vertical direction using the tool. Do not try and pull out the cable by hand or wire breakage may result. Cable and connector handling: Do not apply a twisting torque to the cable and connector. REFLOW SOLDERING CONDITION: Reflow soldering should be carried out according to condition shown in Fig. 4. STRESS TO THE CONNECTOR (Fig. 1) C A B E D 1. Stress to the housing. Stress A and B: 4.9N (0.5kgf) max. 2. Stress to the outer sleeve. Stress C: 2.94N (0.3kgf) max. Stress D: 1.96N (0.2kgf) max. 3. Stress to the cable. Stress E: 4.9N (0.5kgf) max. for 81 cable 7.84N (0.8kgf) max. for 76 cable DISENGAGEMENT TOOL (Fig. 2): mm M19000 How to use disengagement tool 20 2 2.7 1 5 0.6 51 0.5 0.6 45 2 5 0.6 2 0.6 3.5 0.6 STANDARD REFLOW SOLDERING CONDITIONS (Fig. 4) SMA-FSC ADAPTERS (Fig. 3): mm MM121460 (For FSC type receptacle) 260 250 8.64 0.76 5.33 5.08 1.48 FSC - MALE Temperature (C) 14.06 240 230 220 210 200 190 3.1 5.33 180 30 60 90 Time [sec.] SMA - JACK 180 Temperature (C) Peak temperature 225 5C 13.93 4.4 2.5 5.08 SMA - JACK 220 200 150 100 Pre-heating 150 10C 25 0 Time [sec.] 10 sec. max. 1.33 FSC - FEMALE 2.5 5.33 60 ~ 120 sec. 2.5 2.16 320 150 Allowable temperature and time of reflow soldering MM121454 (For FSC type cable assembly) 5.33 120 Solder : Sn60%- Pb40% 20 ~ 30 sec. max. * Measuring point of temperature in-out terminals of the device. * Reflow Soldering * Hot air * Both convection and infrared rays * Hot plate CG01-J HIGH FREQUENCY DEVICES MINIATURE CABLE SPECIFICATIONS SPECIFICATIONS SPECIFICATIONS 76 81 92 Description 0.8D Single shield outer conductor with FEP insulation, based on JIS C 3501 0.4 Single shield outer conductor with FEP insulation, based on JIS C 3501 0.4 Single shield outer conductor PFA cable based on JIS C 3501 -- Silver-coated copper-covered steel wire Silver-coated copper-covered steel wire Silver-coated copper-covered steel wire No. and Dia. (No./mm) 1/0.26 7/0.05 1/0.15 Dia. (mm) 0.26 0.15 0.15 Material -- FEP FEP or PFA PFA Softening point C (typ.) 285 250 302-310 Dia. (mm) 0.8 0.4 0.43 -- Single braid of tin-coated copper wire Single braid of tin or silver-coated copper wire Tin plated copper wire Carriers -- 16 16 8 8 Ends -- 5 5 3 6 Dia. of wire (mm) 0.05 0.05 0.05 Material -- FEP FEP or PFA PFA Nominal thick. (mm) 0.1 0.05 0.075 (mm) 1.25 0.83 50 50 50 300V rms, maximum 300V rms, maximum 300V rms, maximum 100 100 100 Material Inner conductor Insulation Material Outer Conductor Sheath Nominal impedance () Continuous working voltage Nominal capacitance (pF/m) dB/km at 1GHz 1560 3000 2890 dB/km at 2 GHz 2300 4260 4280 dB/km at 3GHz 2900 5240 5390 dB/km at 4GHz 3500 6180 6440 HIGH FREQUENCY DEVICES Overall Dia. Nominal attenuation Velocity Factor 2.09 x 108 m/s* 2.09 x 108 m/s* 2.09 x 108 m/s* *Meters per second CG01-J 321