RF Series Aluminum Electrolytic Capacitors (High Ripple,Low ESR) MERITEK FEATURES * * * Low ESR, low impedance Large permissible ripple current For AC adaptors and ballasts SPECIFICATIONS Item Characteristic o Operating Temp Range Rated Working Voltage Capacitance Tolerance Leakage Current o (25 C) o -25 C to +105 C 160 to 450VDC 20% (M) I 0.03CV+40A (max) after 3 minutes l= Leakage current (A) C=Nominal Capac itance(F) V=Rated voltage o Surge voltage (25 C) WV SV 160 200 200 250 250 300 350 400 400 450 450 500 Dissipation Factor o Tan (120Hz, 25 C) Add 0.02 per 100F for more than 100F WV 160 200 250 350 tan 0.10 0.10 0.10 0.12 400 0.12 450 0.15 Low Temperature Stability Impedance ratio at 120Hz Rated voltage 160-250 o o -25 C to +25 C 3 350 4 450 15 o After 2000 hours (1000 hours for OD Capacitance change Load Life 400 6 8mm) application of WV at 105 C the capacitor shall meet the following limits. 20% of initial value Dissipation Factor 200% of initial specified value Leakage current initial specified value o Shelf Life At 105 C no voltage applied after 500 hours the capacitor shall meet the following limits. Capacitance change 20% of initial value Dissipation Factor 200% of initial specified value Leakage current 200% of initial specified value PART NUMBERING SYSTEM RF CASE SIZE 16V 222 M TA D F d 13 x 21 Meritek Series 6.3 2.5 8 3.5 10 13 16 5.0 0.6 0.5 18 7.5 0.8 RIPPLE C URRENT COEFFICIENTS Voltage Temperature Multiplier Capacitance Expressed in microfarads (F). First two digits are significant figures. Third digit denotes number of zeros. `R' Denotes decimal point for values less than 10 F. Frequency (Hz) WV 160~450 70 1.80 60 0.70 85 1.50 105 1.00 120 1K Multiplier 1.00 1.40 10K 1.60 Tolerance - M = 20% Package CODE TA Tape & Ammo TR Tape & Reel BLANK Bulk Case size - (D) Diameter X (L) Length in mm (Optional) A suffix may be added to denote tape and reel/tape and ammo lead spacing or customer specific features Case size: Max ripple current: (R.C.): CASE SIZE & MAX RIPPLE CURRENT F 160 WV ITEM D x L 200 R.C. D x L 250 R.C. D x L 350 400 450 R.C. D x L R.C. D x L R.C. D x L R.C. 10x13 10x16 17 27 10x13 10x16 17 27 10x13 10x21 15 27 10x16 10x21 13x21 16x25 16x32 18x35 33 45 65 110 150 180 10x21 10x21 13x26 16x25 16x32 18x35 37 45 70 110 150 180 13x21 13x21 16x25 16x32 18x35 34 40 65 110 140 1 2.2 6.3x11 22 6.3x11 22 8x11 25 3.3 4.7 10 22 33 47 100 220 8x11 8x11 10x13 10x21 13x21 13x26 16x25 18x35 31 37 60 110 130 170 260 440 8x11 10x13 10x16 10x21 13x26 13x26 16x32 18x42 31 40 65 110 140 170 290 470 10x13 10x13 10x21 13x26 13x26 16x25 18x35 33 40 70 120 140 180 290 Specifications are subject to change without notice. D x L (mm) mA (rms) 85oC, 120Hz rev.6a