Keysight 33502A 2-channel
Data Sheet
needs.
–
–
–
–
–
–
Table 1.
Feature Characteristic
General
Number of channels 2
Channel to channel ground connection Not connected in BYPASS ON.
Connected with both channels OFF or in Gain of 5x
Floating Voltage ±42 Vpk to earth
AC Coupling Programmable
DC Coupling Default, Programmable
Input Impedance
1MΩ Default, Programmable
50Ω Programmable
Maximum Voltage Range ±5 Vpk for gain of 5x, ±30 Vpk for bypass
Damage Level ±10 Vpk for 50 Ω input
±35 Vpk for 1 MΩ input
Input Path Programmable gain of 5x, bypass (1x), or off state
Input Gain 5X 5X, Fixed, Non-Inverting
Gain Accuracy2±0.1% @ 1KHz
Flatness DC coupling1
0.1% : dc - 10KHz
1% : dc - 40KHz
5% : dc - 100KHz
Flatness AC coupling1
0.1% : 30Hz - 10KHz
1% : 10Hz - 40KHz
5% : 3Hz - 100KHz
Small Signal Bandwidth1> 300 KHz (-3db)
Full Power Bandwidth1100KHz @ 50Vpp output
Input Bypass
Bandwidth for 50Ω system
Maximum Current
> 300 MHz (-3db)
0.2 Apk
Noise
Input referred noise < 40nV/ rt-Hz @ 1kHz
Output Current 200mA.
(150mA for continuous output from -8V to +8V)
DC Output Resistance < 2Ω
Max Output Level 1 ±25Vpk
Output DC Offset <10mV
Output Slew Rate 1 > 20V/us
THD + N 1 < 0.01% @ 10kHz, 40 Vpp
Aberrations 1 <5% for waveforms with <3V input step or non slewing output
1. For all loads >250 ohms and <400 pF of capacitance
2. Measured with >=1 Mohm load and 1 Mohm input selection. 3
Table 1 (cont’d).
Feature Characteristic
Transition time 1
(Final value ±1% of step size) 2.5uSec+ 50nSec/volt of output step
Channel to channel isolation for gains of 5x > 75dB
Capacitive Load for no oscillation < 1 nF
Output Protection
Continuous short circuit protection
Thermal overload shutdown.
Over temperature status flag.
1. For all loads >250 ohms and <400 pF of capacitance.
Table 2
General Characteristics
Power Supply 100V/120V/ 220V / 240V ± 10%
Power Line Frequency 50–60 Hz ± 10%,
400 Hz ± 10%.
Power Consumption 100 VA peak (typical value depends on configuration and load)
Operating Environment Full accuracy for 0 °C to 55 °C
Full accuracy to 80% R.H. at 40°C Non–condensing
Storage Temperature –40 °C to 70 °C
Operating Altitude Up to 3000m
Bench Dimensions (WxHxD) 261.2mm x 103.8mm x 303.2mm
Weight 3.1 kg (6.8 lbs)
Safety
Complies with European Low Voltage Directive and carries the CE-marking
Conforms to UL 61010-1, CSA C22.2 61010-1, and IEC 61010-1:2001
EMC
Complies with European EMC Directive for test and measurement products.
- IEC/EN 61326-1
- CISPR Pub 11 Group 1, class A
- AS/NZS CISPR 11
- ICES/NMB-001
Complies with Australian standard and carries C-Tick mark
This ISM device complies with Canadian ICES-001.
Cet appareil ISM est conforme á la norme NMB-001 du Canada
Acoustic Noise Normal operating mode: SPL 35db(A)
Display 4.3" Color TFT WQVGA (480x272), LED backlight
Remote Interfaces 10/100Mbit LAN
USB 2.0 Standard
Language SCPI – 1994.0, IEEE–488.2
LXI Compliance LXI Class C, Version 1.0
Number of Channels 2
Channel to channel ground connection Not connected in BYPASS ON.
Connected with both channels OFF or in Gain of 5x
Floating Voltage ±42 Vpk to earth
4
myKeysight
www.keysight.com/find/mykeysight
www.axiestandard.org
®
www.lxistandard.org
www.pxisa.org
Three-Year Warranty
www.keysight.com/find/ThreeYearWarranty
Keysight Assurance Plans
www.keysight.com/find/AssurancePlans
www.keysight.com/quality
Keysight Channel Partners
www.keysight.com/find/channelpartners
India
Japan
Finland
Italy
Spain
