Product specification - August 27, 2013 V.7 Supersedes Date of Mar. 06, 2003 DATA SHEET GENERAL PURPOSE CHIP RESISTORS RC0603 5%, 1%, 0.5% RoHS compliant Product specification Chip Resistor Surface Mount RC 0603 (RoHS Compliant) SERIES SCOPE ORDERING INFORMATION - GLOBAL PART NUMBER & 12NC This specification describes RC0603 series chip resistors with lead-free terminations made by thick film process. Both part numbers are identified by the series, size, tolerance, packing type, temperature coefficient, taping reel and resistance value. YAGEO BRAND ordering code GLOBAL PART NUMBER (PREFERRED ) APPLICATIONS All general purpose application FEATURES RoHS compliant - Products with lead free terminations meet RoHS requirements - Pb-glass contained in electrodes, resistor element and glass are exempted by RoHS Reducing environmentally hazardous wastes High component and equipment reliability Saving of PCB space None forbidden-materials used in products/production Halogen Free Epoxy RC0603 2 9 X R - XX XXXX L (1) (2) (3) (4) (5) (6) (1) TOLERANCE D = 0.5% F = 1% J = 5% (for Jumper ordering, use code of J) (2) PACKAGING TYPE R = Paper / PE taping reel (3) TEMPERATURE COEFFICIENT OF RESISTANCE - = Base on spec (4) TAPING REEL 07 = 7 inch dia. Reel 10 = 10 inch dia. Reel 13 = 13 inch dia. Reel (5) RESISTANCE VALUE There are 2~4 digits indicated the resistor value. Letter R/K/M is decimal point, no need to mention the last zero after R/K/M, e.g.1K2, not 1K20. Detailed resistance rules show in table of "Resistance rule of global part number". (6) DEFAULTCODE Letter L is the system default code for ordering only. (Note) Resistance rule of global part number Resistance code rule Example 0R 0R = Jumper XRXX (1 to 9.76 ) 1R = 1 1R5 = 1.5 9R76 = 9.76 XXRX (10 to 97.6 ) 10R = 10 97R6 = 97.6 XXXR (100 to 976 ) 100R = 100 XKXX (1 to 9.76 K) 1K = 1,000 9K76 = 9760 XMXX (1 to 9.76 M) 1M = 1,000,000 9M76= 9,760,000 ORDERING EXAMPLE The ordering code of a RC0603 chip resistor, value 56 X with 1% tolerance, supplied in 7-inch tape reel is: RC0603FR-0756RL. NOTE 1. All our RSMD products meet RoHS compliant. "LFP" of the internal 2D reel label mentions "Lead Free Process" 2. On customized label, "LFP" or specific symbol printed and the optional "L" at the end of GLOBAL PART NUMBER / 12NC can be added (both are on customer request) www.yageo.com Aug. 27, 2013 V.7 Product specification Chip Resistor Surface Mount RC SERIES 0603 (RoHS Compliant) 3 9 PHYCOMP BRAND ordering codes Both GLOBAL PART NUMBER (preferred) and 12NC (traditional) codes are acceptable to order Phycomp brand products. GLOBAL PART NUMBER (PREFERRED ) For detailed information of GLOBAL PART NUMBER and ordering example, please refer to page 2. 12NC CODE 2322 / 2350 XXX XXXXX L (1) (2) (3) (4) PAPER / PE TAPE ON REEL (units) (2) TYPE/ START TOL. RESISTANCE 0603 IN (1) (%) RANGE 5,000 RC21 2322 5% 1 to 10 M 702 60xxx 702 70xxx 702 81xxx RC22 2322 1% 1 to 10 M 704 6xxxx 704 7xxxx 704 8xxxx HRC21 2350 5% 11 to 22 M 522 10xxx - - Jumper 2322 - 702 96001 702 97001 702 92002 0 10,000/not preferred 20,000 (1) The resistors have a 12-digit ordering code starting with 2322 / 2350. (2) The subsequent 4 or 5 digits indicate the resistor tolerance and packaging. (3) The remaining 4 or 3 digits represent the resistance value with the last digit indicating the multiplier as shown in the table of "Last digit of 12NC". (4) "L" is optional symbol (Note) . ORDERING EXAMPLE The ordering code of a RC22 resistor, value 56 X with 1% tolerance, supplied in tape of 5,000 units per reel is: 232270465609(L) or RC0603FR-0756R(L). Last digit of 12NC Resistance decade (3) 0.01 to 0.0976 X Last digit 0 0.1 to 0.976 X 7 1 to 9.76 X 8 10 to 97.6 X 9 100 to 976 X 1 1 to 9.76 KX 2 10 to 97.6 KX 3 100 to 976 KX 4 1 to 9.76 MX 5 10 to 97.6 MX 6 Example: 0.02 X 0.3 X = 0200 or 200 = 3007 or 307 1X = 1008 or 108 33 KX 10 MX = 3303 or 333 = 1006 or 106 NOTE 1. All our RSMD products are RoHS compliant. "LFP" of the internal 2D reel label mentions "Lead Free Process" 2. On customized label, "LFP" or specific symbol printed and the optional "L" at the end of GLOBAL PART NUMBER / 12NC can be add ed (both are on customer request) www.yageo.com Aug. 27, 2013 V.7 Product specification Chip Resistor Surface Mount RC SERIES 0603 (RoHS Compliant) 4 9 MARKING RC0603 No marking Fig. 1 For further marking information, please refer to data sheet "Chip resistors marking". CONSTRUCTION The resistor is constructed on top of a high-grade ceramic body. Internal metal electrodes are added on each end to make the contacts to the thick film resistive element. The composition of the resistive element is a noble metal imbedded into a glass and covered by a second glass to prevent environment influences. The resistor is laser trimmed to the rated resistance value. The resistor is covered with a protective epoxy coat, finally the two external terminations (matte tin on Nibarrier) are added. See fig.4 OUTLINES For dimension see Table 1 DIMENSIONS Table 1 TYPE RC0603 L (mm) 1.60 0.10 W (mm) 0.80 0.10 H (mm) 0.45 0.10 I1 (mm) 0.25 0.15 I2 (mm) 0.25 0.15 Fig. 2 Chip resistor outlines www.yageo.com Aug. 27, 2013 V.7 Product specification Chip Resistor Surface Mount RC SERIES 0603 (RoHS Compliant) ELECTRICAL CHARACTERISTICS Table 2 5 9 FOOTPRINT AND SOLDERING PROFILES RC0603 1/10 W CHARACTERISTICS Operating Temperature Range -55 C to +155 C Maximum Working Voltage 75 V Maximum Overload Voltage 150 V Dielectric Withstanding Voltage 100 V For recommended footprint and soldering profiles, please refer to data sheet "Chip resistors mounting". 5% (E24) 1 to 22 M 1% (E24/E96) 1 to 10 M Resistance Range 0.5% (E24/E96) 10 to 1 M Zero Ohm Jumper < 0.05 Temperature Coefficient 1 R 10 200 ppm/C 10 M < R 22 M 200 ppm/C 10 < R 10 M 100 ppm/C Rated Current 1.0 A Maximum Current 2.0 A Jumper Criteria PACKING STYLE AND PACKAGING QUANTITY Table 3 Packing style and packaging quantity PRODUCT TYPE PACKING STYLE REEL DIMENSION QUANTITY PER REEL RC0603 Paper Taping Reel (R) 7" (178 mm) 5,000 units 10" (254 mm) 10,000 units 13" (330 mm) 20,000 units NOTE 1. For paper tape and reel specification/dimensions, please see the special data sheet "Chip resistors packing". FUNCTIONAL DESCRIPTION POWER RATING RC0603 rated power at 70C is 1/10 W RATED VOLTAGE The DC or AC (rms) continuous working voltage corresponding to the rated power is determined by the following formula: V=(P X R) or max. working voltage whichever is less Where V=Continuous rated DC or AC (rms) working voltage (V) P=Rated power (W) R=Resistance value (X) Fig. 3 Maximum dissipation (P) in percentage of rated power as a function of the operating ambient temperature (T amb ) www.yageo.com Aug. 27, 2013 V.7 Product specification Chip Resistor Surface Mount RC SERIES 0603 (RoHS Compliant) 6 9 TESTS AND REQUIREMENTS Table 4 Test condition, procedure and requirements TEST TEST METHOD PROCEDURE REQUIREMENTS Temperature Coefficient of Resistance (T.C.R.) IEC 60115-1 4.8 At +25/-55 C and +25/+125 C Refer to table 2 Formula: R2-R1 T.C.R= ------------------------- x 106 (ppm/C) R1(t2-t1) Where t1=+25 C or specified room temperature t2=-55 C or +125 C test temperature R1=resistance at reference temperature in ohms R2=resistance at test temperature in ohms Life/Endurance IEC 60115-1 4.25.1 1,000 hours at 70 5 C applied RCWV 1.5 hours on, 0.5 hour off, still air required (1.0%+0.05 ) for 1%, 0.5% tol. (3.0%+0.05 ) for 5% tol. <100 m for Jumper High Temperature Exposure/ Endurance at Upper Category Temperature IEC 60068-2-2 Moisture Resistance MIL-STD-202G Method-106G 1,000 hours at 155 5 C, unpowered (1.0%+0.05 ) for 1%, 0.5% tol. (2.0%+0.05 ) for 5% tol. <50 m for Jumper Each temperature / humidity cycle is defined at 8 hours, 3 cycles / 24 hours for 10d. with 25 C / 65 C 95% R.H, without steps 7a & 7b, unpowered (0.5%+0.05 ) for 1%, Parts mounted on test-boards, without condensation on parts <100 m for Jumper 0.5% tol. (2.0%+0.05 ) for 5% tol. Measurement at 24 2 hours after test conclusion Thermal Shock MIL-STD-202G Method-107G -55/+125 C (0.5%+0.05 ) for 1%, Number of cycles required is 300. Devices unmounted 0.5% tol. 2.5 times of rated voltage or maximum overload voltage whichever is less for 5 sec at room temperature (1.0%+0.05 ) for 1%, (1%+0.05 ) for 5% tol. Maximum transfer time is 20 seconds. Dwell time <50 m for Jumper is 15 minutes. Air - Air Short Time Overload IEC60115-1 4.13 0.5% tol. (2.0%+0.05 ) for 5% tol. <50 m for Jumper No visible damage www.yageo.com Aug. 27, 2013 V.7 Product specification Chip Resistor Surface Mount RC SERIES 0603 (RoHS Compliant) TEST TEST METHOD PROCEDURE REQUIREMENTS Board Flex/ Bending IEC 60068-2-21 Chips mounted on a 90mm glass epoxy resin PCB (FR4) (1.0%+0.05 ) 3 mm bending Bending time: 60 5 seconds Low Temperature Operation IEC 60068-2-1 Insulation Resistance IEC 60115-1 4.6 This constitutes shall be repeated for 96 hours (1.0%+0.05 ) for 5% tol. Rated continuous overload voltage (RCOV) for 1 minute Voltage (DC) IEC 60115-1 4.7 Resistance to Solvent IPC/JEDEC J-STD-020D Noise Humidity IEC 60115-1 4.12 IEC 60115-1 4.21 No visible damage (0.5%+0.05 ) for 1%, 0.5% Type Dielectric Withstand Voltage <50 m for Jumper The resistor shall be subjected to a DC rated voltage for 1.5 h-on, 0.5 h-off, at -55 3 C However the applied voltage shall not exceed the maximum operating voltage 7 9 tol . No visible damage 10 G RC0603 100 V Maximum voltage (Vrms) applied for 1 minute Type RC0603 Voltage (AC) 100 Vrms No breakdown or flashover lsopropylalcohol (C3H7OH) followed by brushing No smeared Maximum voltage (Vrms) applied Resistors range Value R < 100 10 dB 100 R < 1 K 20 dB 1 K R < 10 K 30 dB 10 K R < 100 K 40 dB 100 K R < 1 M 46 dB 1 M R 22 M 48 dB Steady state for 1000 hours at 40 C / 95% (1.0%+0.05 ) for 1%, 0.5% tol. R.H. RCWV applied for 1.5 hours on and (2.0%+0.05 ) for 5% tol. 0.5 hour off <100 m for Jumper www.yageo.com Aug. 27, 2013 V.7 Product specification Chip Resistor Surface Mount TEST Intermittent Overload RC SERIES 0603 (RoHS Compliant) TEST METHOD PROCEDURE REQUIREMENTS IEC 60115-1 4.39 2.5 times of rated voltage or maximum overload voltage whichever is less for 1 second on and 25 seconds off; total 10,000 cycles (1.0%+0.05 ) for 1%, 0.5% tol. 8 9 (2.0%+0.05 ) for 5% tol. <100 m for Jumper Solderability - Wetting IPC/JEDEC J-STD-002B test B Electrical Test not required Well tinned (95% covered) Magnification 50X No visible damage SMD conditions: 1st step: method B, aging 4 hours at 155 C dry heat 2nd step: leadfree solder bath at 245 3 C Dipping time: 3 0.5 seconds - Leaching IPC/JEDEC J-STD-002B test D Leadfree solder, 260 C, 30 seconds immersion time No visible damage - Resistance to Soldering Heat IEC 60068-2-58 Condition B, no pre-heat of samples (0.5%+0.05 ) for 1%, Leadfree solder, 260 C, 10 seconds immersion time 0.5 tol. Procedure 2 for SMD: devices fluxed and cleaned with isopropanol (1.0%+0.05 ) for 5% tol. <50 m for Jumper No visible damage www.yageo.com Aug. 27, 2013 V.7 Product specification Chip Resistor Surface Mount RC SERIES 0603 (RoHS Compliant) 9 9 REVISION HISTORY REVISION DATE CHANGE NOTIFICATION DESCRIPTION Version 7 Aug. 27, 2013 - No marking photos updated Version 6 Feb. 05, 2013 - Marking updated - MWV/RCOV updated Version 5 June 29, 2012 - Add 0.5% tolerance for RC0603 - update test method Version 4 Apr 24, 2009 - - Test Items and methods updated - Test requirements upgraded Version 3 Jul 15, 2008 - - Change to dual brand datasheet that describe RC0603 with RoHS compliant - Description of "Halogen Free Epoxy" added - Define global part number Version 2 Aug 19, 2004 - Version 1 Aug 02, 2004 - - New datasheet for 0603 thick film 1% and 5% with lead-free terminations - Replace the 0603 part of pdf files: RC01_11_21_31_5, RC02_12_22_32_10, and HRC21_5_4 - Test method and procedure updated - PE tape added (paper tape will be replaced by PE tape) - High ohmic products combined into standard products. " Yageo reserves all the rights for revising the content of this datasheet without further notification, as long as the products itself are unchanged. Any product change will be announced by PCN." www.yageo.com Aug. 27, 2013 V.7 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Yageo: RC0603FR-07105KL RC0603FR-07107KL RC0603FR-0710K2L RC0603FR-0710K5L RC0603FR-0710K7L RC0603FR-0710ML RC0603FR-07110KL RC0603FR-07113RL RC0603FR-07118RL RC0603FR-0711K3L RC0603FR-0711K5L RC0603FR-0711K8L RC0603FR-0711KL RC0603FR-07120RL RC0603FR-07121RL RC0603FR-07127KL RC0603FR-07127RL RC0603FR-0712K7L RC0603FR-0712KL RC0603FR-0712R1L RC0603FR-0712R7L RC0603FR-0712RL RC0603FR-07130RL RC0603FR-07133KL RC0603FR-07133RL RC0603FR-07137KL RC0603FR-07137RL RC0603FR-0713K3L RC0603FR-0713K7L RC0603FR-07140RL RC0603FR-07147KL RC0603FR-07147RL RC0603FR-0714K3L RC0603FR-07150KL RC0603FR-07154KL RC0603FR-07158KL RC0603FR-0715K4L RC0603FR-0715KL RC0603FR-0715R4L RC0603FR-0715RL RC0603FR-07160RL RC0603FR-07165RL RC0603FR-07169RL RC0603FR-0716K5L RC0603FR-0716K9L RC0603FR-07174RL RC0603FR-07178KL RC0603FR-07178RL RC0603FR-0717K4L RC0603FR-0717R8L RC0603FR-07180RL RC0603FR-07182KL RC0603FR-07182RL RC0603FR-07187RL RC0603FR-0718K2L RC0603FR-0718K7L RC0603FR-0718KL RC0603FR-0718R2L RC0603FR-0718RL RC0603FR-0719K6L RC0603FR-071K07L RC0603FR-071K18L RC0603FR-071K27L RC0603FR-071K2L RC0603FR-071K33L RC0603FR-071K37L RC0603FR-071K3L RC0603FR-071K43L RC0603FR-071K47L RC0603FR-071K54L RC0603FR-071K58L RC0603FR-071K5L RC0603FR-071K65L RC0603FR-071K6L RC0603FR-071K8L RC0603FR071KL RC0603FR-071M21L RC0603FR-071M4L RC0603FR-071M5L RC0603FR-071M82L RC0603FR-071ML RC0603FR-071R3L RC0603FR-071RL RC0603FR-0720K5L RC0603FR-0720KL RC0603FR-0720RL RC0603FR07215KL RC0603FR-0721KL RC0603FR-0721R5L RC0603FR-07221KL RC0603FR-07221RL RC0603FR-0722K1L RC0603FR-0722K6L RC0603FR-0722KL RC0603FR-0722R1L RC0603FR-0722R6L RC0603FR-0722RL RC0603FR-07237RL RC0603FR-0723K2L RC0603FR-0723K7L