Transistor 2SB0621, 2SB0621A (2SB621, 2SB621A) Silicon PNP epitaxial planer type For low-frequency output amplification Complementary to 2SD0592 (2SD592) and 2SD0592A (2SD592A) Unit: mm 5.00.2 Low collector to emitter saturation voltage VCE(sat). High transition frequency fT. Absolute Maximum Ratings Parameter (Ta=25C) Symbol Collector to 2SB0621 base voltage 2SB0621A Collector to 2SB0621 Ratings -30 VCBO Emitter to base voltage VEBO Peak collector current ICP V -60 V -50 -5 V -1.5 A Collector current IC -1 A Collector power dissipation PC 750 mW Junction temperature Tj 150 C Storage temperature Tstg -55 ~ +150 C Electrical Characteristics Symbol ICBO Collector to base 2SB0621 voltage 2SB0621A Collector to emitter 2SB0621 voltage 2SB0621A Emitter to base voltage 1.27 1.27 1 2 3 2.540.15 Conditions min typ VCB = -20V, IE = 0 1:Emitter 2:Collector 3:Base JEDEC:TO-92 EIAJ:SC-43A IC = -10A, IE = 0 VCEO IC = -2mA, IB = 0 VEBO IE = -10A, IC = 0 -5 VCE = -10V, IC = -500mA 85 VCE = -5V, IC = -1A 50 * hFE2 max Unit - 0.1 A -30 VCBO hFE1 Forward current transfer ratio +0.2 0.45 -0.1 (Ta=25C) Parameter Collector cutoff current +0.2 0.45 -0.1 -25 VCEO emitter voltage 2SB0621A Unit 2.30.2 13.50.5 5.10.2 Features 4.00.2 V -60 -25 V -50 V 340 Collector to emitter saturation voltage VCE(sat) IC = -500mA, IB = -50mA - 0.2 -0.4 V Base to emitter saturation voltage VBE(sat) IC = -500mA, IB = -50mA - 0.85 -1.2 V Transition frequency fT VCB = -10V, IE = 50mA, f = 200MHz 200 Collector output capacitance Cob VCB = -10V, IE = 0, f = 1MHz 20 *h FE1 MHz 30 pF Rank classification Rank Q R S hFE1 85 ~ 170 120 ~ 240 170 ~ 340 Note.) The Part numbers in the Parenthesis show conventional part number. 1 Transistor 2SB0621, 2SB0621A PC -- Ta IC -- VCE 1.0 IC -- IB -1.5 -1.2 0.7 0.6 IB=-10mA -9mA -8mA -1.0 -7mA -6mA - 0.75 0.5 0.4 -5mA -4mA -3mA - 0.5 0.3 0.2 -2mA - 0.25 -1mA - 0.6 - 0.4 - 0.2 60 80 100 120 140 160 0 0 -8 -10 -10 -3 -1 Ta=75C 25C -30 -10 -3 25C Ta=-25C -1 75C - 0.1 - 0.03 - 0.03 -1 -3 -10 - 0.01 - 0.01 - 0.03 - 0.1 - 0.3 Collector current IC (A) Collector output capacitance Cob (pF) 140 120 100 80 60 40 20 0 3 10 30 Emitter current IE (mA) 100 -8 -10 -12 VCE=-10V -3 400 350 300 Ta=75C 250 200 25C 150 -25C 100 50 0 - 0.01 - 0.03 - 0.1 - 0.3 -10 -1 -3 -10 Collector current IC (A) VCER -- RBE -120 IE=0 f=1MHz Ta=25C 45 40 35 30 25 20 15 10 5 0 -1 -6 450 Cob -- VCB 160 1 -1 50 VCB=-10V Ta=25C 180 -4 500 Collector current IC (A) fT -- IE 200 -2 Base current IB (mA) IC/IB=10 - 0.3 -25C - 0.01 - 0.01 - 0.03 - 0.1 - 0.3 0 hFE -- IC -100 Base to emitter saturation voltage VBE(sat) (V) -30 - 0.1 -6 VBE(sat) -- IC IC/IB=10 - 0.3 -4 Collector to emitter voltage VCE (V) VCE(sat) -- IC -100 -2 Forward current transfer ratio hFE 40 -3 -10 -30 -100 Collector to base voltage VCB (V) Collector to emitter voltage VCER (V) 20 Ambient temperature Ta (C) Collector to emitter saturation voltage VCE(sat) (V) - 0.8 0 0 Transition frequency fT (MHz) -1.0 0.1 0 2 VCE=-10V TC=25C Collector current IC (A) -1.25 0.8 Collector current IC (A) Collector power dissipation PC (W) Ta=25C 0.9 IC=-10mA Ta=25C -100 -80 -60 2SB0621A -40 2SB0621 -20 0 0.1 0.3 1 3 10 30 100 Base to emitter resistance RBE (k) Transistor 2SB0621, 2SB0621A ICEO -- Ta 104 Area of safe operation (ASO) -10 VCE=-10V Single pulse Ta=25C -3 Collector current IC (A) ICP -1 IC t=10ms - 0.3 102 t=1s - 0.1 - 0.03 10 - 0.003 1 0 20 40 60 80 100 120 140 160 Ambient temperature Ta (C) - 0.001 - 0.01 - 0.03 - 0.1 - 0.3 -1 2SB0621A - 0.01 2SB0621 ICEO (Ta) ICEO (Ta=25C) 103 -3 -10 Collector to emitter voltage VCE (V) 3 Request for your special attention and precautions in using the technical information and semiconductors described in this material (1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuit examples of the products. It does not constitute the warranting of industrial property, the granting of relative rights, or the granting of any license. (3) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: * Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. * Any applications other than the standard applications intended. (4) The products and product specifications described in this material are subject to change without notice for reasons of modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, redundant design is recommended, so that such equipment may not violate relevant laws or regulations because of the function of our products. (6) When using products for which dry packing is required, observe the conditions (including shelf life and after-unpacking standby time) agreed upon when specification sheets are individually exchanged. (7) No part of this material may be reprinted or reproduced by any means without written permission from our company. Please read the following notes before using the datasheets A. These materials are intended as a reference to assist customers with the selection of Panasonic semiconductor products best suited to their applications. Due to modification or other reasons, any information contained in this material, such as available product types, technical data, and so on, is subject to change without notice. Customers are advised to contact our semiconductor sales office and obtain the latest information before starting precise technical research and/or purchasing activities. B. Panasonic is endeavoring to continually improve the quality and reliability of these materials but there is always the possibility that further rectifications will be required in the future. Therefore, Panasonic will not assume any liability for any damages arising from any errors etc. that may appear in this material. C. These materials are solely intended for a customer's individual use. Therefore, without the prior written approval of Panasonic, any other use such as reproducing, selling, or distributing this material to a third party, via the Internet or in any other way, is prohibited. 2001 MAR