For more information, please visit the product page. date 07/08/2014 page 1 of 7 SERIES: PQA30-D DESCRIPTION: DC-DC CONVERTER FEATURES * * * * * * * * * * up to 30 W isolated output 2:1 input range (18~36 Vdc, 36~75 Vdc) smaller package single, regulated output 1,500 Vdc isolation short circuit, over current, and over voltage protections remote on/off operating temperature range (-40~85C) six sided metal shielding efficiency up to 89% MODEL input voltage output voltage output current output power ripple and noise1 efficiency typ (Vdc) range (Vdc) (Vdc) min (A) max (A) max (W) max (mVp-p) typ (%) PQA30-D24-S3-D 24 18~36 3.3 0.60 6 20 120 87 PQA30-D24-S5-D 24 18~36 5 0.60 6 30 120 88 PQA30-D24-S9-D 24 18~36 9 0.333 3.333 30 120 88 PQA30-D24-S12-D 24 18~36 12 0.25 2.5 30 120 88 PQA30-D24-S15-D 24 18~36 15 0.20 2 30 120 89 PQA30-D24-S24-D 24 18~36 24 0.125 1.25 30 120 89 PQA30-D48-S3-D 48 36~75 3.3 0.60 6 20 120 87 PQA30-D48-S5-D 48 36~75 5 0.60 6 30 120 88 PQA30-D48-S12-D 48 36~75 12 0.25 2.5 30 120 89 PQA30-D48-S15-D 48 36~75 15 0.20 2 30 120 89 PQA30-D48-S24-D 48 36~75 24 0.125 1.25 30 120 88 Notes: 1. Ripple and noise are measured at 20 MHz BW by "parallel cable" method with 1 F ceramic and 10 F electrolytic capacitors on the output. PART NUMBER KEY PQA30 - DXX - SXX - DX Base Number Input Voltage Output Voltage cui.com Packaging Style DIP Heatsink "blank" = no heatsink H = with heatsink For more information, please visit the product page. CUI Inc SERIES: PQA30-D DESCRIPTION: DC-DC CONVERTER date 07/08/2014 page 2 of 7 INPUT parameter conditions/description operating input voltage 24 Vdc input models 48 Vdc input models start-up voltage 24 Vdc input models 48 Vdc input models under voltage shutdown 24 Vdc input models 48 Vdc input models surge voltage for maximum of 1 second 24 Vdc input models 48 Vdc input models start-up time nominal input, constant load min typ max units 18 36 24 48 36 75 Vdc Vdc 17.8 35.8 18 36 Vdc Vdc 16 32 Vdc Vdc -0.7 -0.7 50 100 Vdc Vdc 10 ms 1 mA models ON (CTRL open or connect TTL high level, 2.5~12 Vdc) CTRL1 models OFF (CTRL connect GND or low level, 0~1.2 Vdc) input current (models OFF) filter Note pi filter 1. CTRL pin voltage is referenced to GND. OUTPUT parameter conditions/description line regulation load regulation min typ max units full load, input voltage from low to high 0.2 0.5 % 10% to 100% load 0.5 1 % 1 3 % voltage accuracy adjustability 10 % switching frequency PWM mode 300 transient recovery time 25% load step change 300 500 kHz transient response deviation 25% load step change 3 5 temperature coefficient 100% load 0.02 s % %/C PROTECTIONS parameter conditions/description short circuit protection hiccup, automatic recovery min over current protection over voltage protection 120 3.3 Vdc output models 5 Vdc output models 9 Vdc output models 12 Vdc output models 15 Vdc output models 24 Vdc output models typ max 130 150 3.96 6 10.8 15 18 28 cui.com units % Vdc Vdc Vdc Vdc Vdc Vdc For more information, please visit the product page. CUI Inc SERIES: PQA30-D DESCRIPTION: DC-DC CONVERTER date 07/08/2014 page 3 of 7 SAFETY AND COMPLIANCE parameter conditions/description isolation voltage input to output for 1 minute at 1 mA max. 1,500 Vdc isolation resistance input to output at 500 Vdc 1,000 M EMI/EMC CE1 conducted emissions CISPR22/EN55022 class A (no circuit required); class B (external circuit required, see Figure 1-b) radiated emissions CISPR22/EN55022 class A (no circuit required); class B (external circuit required, see Figure 1-b) ESD IEC/EN61000-4-2 class B, contact 4kV radiated immunity IEC/EN61000-4-3 class A, 10V/m EFT/burst IEC/EN61000-4-4 class B, 2kV (external circuit required, see Figure 1-a) surge IEC/EN61000-4-5 class B, 2kV (external circuit required, see Figure 1-a) conducted immunity IEC/EN61000-4-6 class A, 3 Vr.m.s voltage dips & interruptions IEC/EN61000-4-29 class B, 0%-70% MTBF as per MIL-HDBK-217F @ 25C RoHS Note min typ max 1,000,000 units hours 2011/65/EU 1. CE mark is only on models without heatsink. ENVIRONMENTAL parameter conditions/description min operating temperature see derating curves storage temperature storage humidity non-condensing case temperature at full load, operating temperature curve range vibration 10~55Hz, 30 min. along x, y, and z axis typ max units -40 85 C -55 125 C 5 95 % 105 C 10 G max units SOLDERABILITY parameter conditions/description min typ hand soldering 1.5 mm from case for 10 seconds 300 C wave soldering see wave soldering profile 260 C max units Peak Temp. 260C Max. Wave Soldering Time 4 Sec. Max. 250 Temperature (C) 200 10 Sec. Max. 150 100 50 0 Time (sec.) MECHANICAL parameter conditions/description min dimensions board mount: 50.80 x 25.40 x 11.80 board mount with heatsink: 50.80 x 25.40 x 16.30 case material aluminum alloy weight board mount board mount with heatsink typ mm mm 22 35 cui.com g g For more information, please visit the product page. CUI Inc SERIES: PQA30-D DESCRIPTION: DC-DC CONVERTER date 07/08/2014 page 4 of 7 MECHANICAL DRAWING BOARD MOUNT units: mm[inch] tolerance: 0.30[0.012] pin diameter tolerance: 0.10[0.004] pin height tolerance: 0.50[0.020] 11.80 [0.465] 1.50 [0.059] PIN CONNECTIONS Function 3 Ctrl 4 Trim 5 0V 6 +Vo 1.00[0.039] 4.10 [0.161] Front View 4 3 5 2 6 1 50.80[2.000] 45.72[1.800] 6 1 10.16 [0.400] 2 5 3 4 PCB Layout Top View 25.40[1.000] GND 10.16 10.16 [0.400] [0.400] Vin 2 5.08[0.200] 1 2.54 [0.100] PIN Grid Size: 2.54mm x 2.54mm Bottom View BOARD MOUNT WITH HEATSINK units: mm[inch] tolerance: 0.30[0.012] pin diameter tolerance: 0.10[0.004] pin height tolerance: 0.50[0.020] 1.50 [0.059] Grid Size: 2.54mm x 2.54mm PIN CONNECTIONS PIN Function 1 Vin 2 GND 3 Ctrl 4 Trim 5 0V 6 +Vo 4 3 5 2 6 1 Top View PCB Layout Top View Front View cui.com For more information, please visit the product page. CUI Inc SERIES: PQA30-D DESCRIPTION: DC-DC CONVERTER date 07/08/2014 page 5 of 7 DERATING CURVES Output Voltage 5V Output Voltage > 5V With heatsink With heatsink 100 Without heatsink 80 60 Load (%) Load (%) 100 Safe operating area 40 60 Safe operating area 40 20 20 -40 Without heatsink 80 -20 0 20 40 50 60 85 -40 100 -20 0 20 40 55 65 85 100 Ambient Temperature (C) Ambient Temperature (C) EMC RECOMMENDED CIRCUIT Table 1 Recommended external circuit components Figure 1 Vi n L DM1 FU SE L CM1 Vin (Vdc) FUSE C Y1 V IN MO V TVS G ND C0 (a) C1 (b) C2 24 EUT LO AD GND choose according to input current MOV + Vo 0V C Y2 TEST CONFIGURATION S14K35 56H 56H TVS SMCJ48A SMCJ90A C0 330F/50V 330F/100V C1, C2 4.7F/50V 2.2F/100V LCM1 1mH 1mH CY1, CY2 1nF/2kV 1nF/2kV Table 2 Oscilloscope External components Lin Lin(4.7H) Note: S14K60 LDM1 Figure 2 Cin 48 Current Probe DC DC Load Cin(220F, ESR < 1.0 at 100 KHz) Lin 4.7H Cin 220F, ESR < 1.0 at 100 kHz 1. Input reflected-ripple current is measured with an inductor Lin and Capacitor Cin to simulate source impedance. cui.com For more information, please visit the product page. CUI Inc SERIES: PQA30-D DESCRIPTION: DC-DC CONVERTER date 07/08/2014 page 6 of 7 APPLICATION NOTES 1. Requirement on output load To ensure this module can operate efficiently and reliably, the minimum output load cannot be less than 10% of the full load during operation. If the actual output power is small, please connect a resistor at the output end in parallel to increase the load. 2. Recommended circuit This series has been tested according to the following recommended testing circuit before leaving the factory. This series should be tested under load (see Figure 3). If you want to further decrease the input/output ripple, you can increase capacitance properly or choose capacitors with low ESR (see Table 3). However, the capacitance must not exceed the maximum capacitive load or a start-up problem might arise (see Table 4). Figure 3 +Vo Vin DC DC Cin GND Cout 0V Table 3 3. Table 4 Vout (Vdc) Cin (F) Cout (F) Vout (Vdc) Max. Capacitive Load (F) 3.3 100 220 3.3 6800 5 100 220 5 6800 9 100 100 9 680 12 100 100 12 680 15 100 100 15 680 24 100 47 24 470 Output Voltage Trimming Leave open if not used. Figure 4 Formula for Trim Resistor Application Circuit for Trim Pin aR2 Vref (part in broken line is the interior of models) -R3 up: RT = a= R1 R 2-a Vo'-Vref + Vo +Vo down: R T = R1 V re f R3 RT R1 Trim V re f R3 Trim R2 RT R2 0V 0V Tr im up Tr im down Note: Table 5 Notes: aR1 -R3 R 1-a a= Vo'-Vref R2 Vref Value for R1, R2, R3, and Vref (see Table 5) RT: Trim Resistor a: User-defined parameter, no actual meanings Vo': The trim up/down voltage Vout (Vdc) R1 (k) R2 (k) R3 (k) Vref (V) 3.3 4.801 2.863 12 1.24 5 2.883 2.864 10 2.5 9 7.5 2.864 15 2.5 12 10.971 2.864 15 2.5 15 14.497 2.864 15 2.5 24 24.872 2.863 20 2.5 1. Minimum load shouldn't be less than 10%, otherwise ripple may increase dramatically. Operation under minimum load will not damage the converter, however, they may not meet all specifications listed. 2. Maximum capacitive load is tested at input voltage range and full load. 3. All specifications are measured at Ta=25C, humidity<75%, nominal input voltage and rated output load unless otherwise specified. cui.com For more information, please visit the product page. CUI Inc SERIES: PQA30-D DESCRIPTION: DC-DC CONVERTER date 07/08/2014 page 7 of 7 REVISION HISTORY rev. 1.0 description date initial release 07/08/2014 The revision history provided is for informational purposes only and is believed to be accurate. Headquarters 20050 SW 112th Ave. Tualatin, OR 97062 800.275.4899 Fax 503.612.2383 cui.com techsupport@cui.com CUI offers a two (2) year limited warranty. Complete warranty information is listed on our website. CUI reserves the right to make changes to the product at any time without notice. Information provided by CUI is believed to be accurate and reliable. However, no responsibility is assumed by CUI for its use, nor for any infringements of patents or other rights of third parties which may result from its use. CUI products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: CUI Inc.: PQA30-D24-S9-D PQA30-D24-S5-D PQA30-D48-S12-D PQA30-D24-S12-D PQA30-D48-S5-D PQA30-D48-S24-D PQA30-D24-S15-D PQA30-D24-S24-D PQA30-D48-S15-D PQA30-D24-S3-D PQA30-D48-S3-D PQA30-D24-S3DH PQA30-D24-S15-DH PQA30-D24-S12-DH PQA30-D24-S24-DH PQA30-D48-S15-DH PQA30-D48-S5-DH PQA30-D48-S24-DH PQA30-D48-S12-DH PQA30-D24-S5-DH PQA30-D48-S3-DH PQA30-D24-S9-DH