IR series New! Sealed pushbutton switches - bushing O 16 mm - momentary Distinctive features UG1006-A The IR series is a range of sealed momentary pushbutton switches with dia. 16 mm bushing. This series is divided into 2 families : standard models and microswitch technology models. Common features B * Sealed to IP67 * Illuminated or non-illuminated * Tactile feedback * Square or round actuator * Wide choice of bezel and actuator colours * Wide choice of illumination colours Standard versions * Numerous terminal options : solder, flying lead, straight PC, quickconnect, screw * Screw versions withstanding up to 4A * Electrical function : NO (2 terminals) NO - Screw terminals NO - Illuminated Wire lead terminals NO - Solder lug terminals Microswitch versions * Withstanding up to 5A * Two electrical functions : NC+NO (3 terminals) NC/NO combined (4 terminals) NC+NO - 3 terminals NC/NO - 4 terminals - Illuminated Optional marking Actuator marking is available on request for models with flat round actuator. O12.00 Maxi (.472DIA MAX.) Standard version Microswitch version Integrated resistor On wire lead illuminated versions, the LED resistor can be integrated in the product by APEM. On request. B-54 www.apem.com APEM IR series New! Sealed pushbutton switches - bushing O 16 mm - momentary - standard version Distinctive features and specifications Screw version up to 4A Tactile feedback Sealed to IP67 Illuminated or non-illuminated Flat round actuator for optional marking B ENVIRONMENTAL SPECIFICATIONS GENERAL SPECIFICATIONS * Front panel sealing : IP67 according to IEC 60529 * Shock resistance : 100 g according to IEC 512-4, test 6c * Vibration resistance : 10-500Hz - 10 g according to IEC 512-4, test 6d * Salt spray : IEC 512-6, test 11f * Operating temperature : -40C to +85C * Panel thickness : 8 mm (.314) max. * Total travel : 1,6 mm (.062) +/- 0,3 mm * Typical operating force : 4N +/- 2N * Mechanical life : 1.000.000 cycles * Torque : 0,8 Nm max. applied to nut * Soldering : 320C max. for 3 sec. ELECTRICAL SPECIFICATIONS * Max. current/voltage rating with resistive load : - Gold plated silver contacts (code 4) : 200mA 48VDC - 200mA 250VAC - Silver contacts (code 2) - screw terminals : 2A 250VAC - 4A 48VDC * Electrical life at full load : 500.000 cycles * Initial contact resistance : 100 m max. * Insulation resistance : 1 G min. at 500VDC * Dielectric strength : 1.500 Vrms LED COMPONENT SPECIFICATIONS LED colour Forward current Typ. forward voltage Max. forward voltage Super red (L0S) 20mA 2,1V 2,3V Yellow (L0Y) 20mA 2,1V 2,3V Green (L0G) 20mA 2,1V 2,3V Blue (L0B) 20mA 3,2V 3,8V White (L0W) 20mA 3,35V 4,25V MATERIALS * Case : thermoplastic UL94-V0 * Actuator : polyamide 6/6 * Bushing/bezel : polyamide 6/6 * Contacts : 4 : silver, gold plated 2 : silver (screw terminals) * Multi-wire lead AWG20, section 0,6 mm2 * LED wire : AWG26, section 0,12 mm2 * Lens : polycarbonate * Terminal seal : epoxy A resistor must be series-connected by the user. Resistor value = supply voltage - LED forward voltage LED forward current On flying lead versions, the LED resistor can be integrated by APEM on request. PANEL CUT-OUT MATRIX MOUNTING Flat seal 14.80 (.582) 27.00 (1.063) 1 8.00 Maxi (.314 max.) 27.00 (1.063) 14.80 (.582) O16.20 (.637) O16.20 (.637DIA) APEM www.apem.com B-55 IR series New! Sealed pushbutton switches - bushing O 16 mm - momentary - standard version Overview IR Electrical function Actuator shape SERIES C R P Square Round, curved Round, flat 3 Normally open (NO) B Actuator colour 1 B 2 3 5 6 7 9 Blue Dark blue Black Green Yellow Red White Orange Bushing & bezel finish 2 7 Black (std) White Other : on request. Terminals Solder lugs Flying leads Straight PC Quick-connect (non-illuminated) V Screw (non-illuminated) S F P Z Contacts 4 2 Silver, gold plated Silver (screw terminals only) LED colour Blank L0S L0Y L0G L0B L0W Non-illum. Super red Yellow Green Blue White Other : on request. ABOUT THIS SERIES On the following pages, you will find successively : model structure of switches and options in the same order as in above chart : please note that not all combinations of above numbers are available. Refer to the following pages for further information. NOTICE Mounting accessories : Standard hardware supplied : 1 hex nut 19 mm (.748) across flats and 1 flat seal Hex nut P/N U4116. Packaging unit : 25 pieces for flying lead models - 40 pieces for other models B-56 www.apem.com APEM IR series New! Sealed pushbutton switches - bushing O 16 mm - momentary - standard version Round - illuminated * Five LED colours * Tin plated LED terminals * Gold plated contacts LED Cathode (-) Function 3 (NO) MODEL STRUCTURE Actuator marking available on IRP models (symbol 12 mm max.). On request. O16.00 (.630DIA) 14.80 (.582) NO NO Also available with straight PC terminals : IR*3P4. LED colour is indicated by the bottom of the switch. 2.00 (.078) Flat Sealed flying lead terminals 2.00 (.078) 3.60 (.141) LED Cathode (-) O16.00 (.630DIA) O19.80 (.779DIA) Normally Open Flat actuator IRP3F4 Normally Open 14.60 (.574) 500.0010.00 (19.685.393) Curved actuator IRR3F4 13.00 (.511) 5.00 (.196) O16.00x100SI (.630DIAx100IS) 2.00 (.078) Normally Open 14.60 (.574) 4.50 (.177) Flat actuator IRP3S4 Normally Open 23.00 (.905) Curved actuator IRR3S4 O19.80 (.779DIA) 5.00 (.196) O16.00x100SI (.630DIAx100IS) 2.00 (.078) Flat Solder lug terminals Wire colours : black : NO contact, red : LED anode (+), blue : LED cathode (-) ACTUATOR COLOUR 1 : blue - B : dark blue - 2 : black - 3 : green - 5 : yellow - 6 : red - 7 : white - 9 : orange BUSHING AND BEZEL FINISH LED COLOUR 2 : black (standard) - 7 : white L0S : super red - L0Y : yellow - L0G : green - L0B : blue L0W : white APEM www.apem.com B-57 B IR series New! Sealed pushbutton switches - bushing O 16 mm - momentary - standard version Round - non-illuminated 2.40 (.094) Quick-connect Z 3.40 (.133) 7.10 (.279) Straight P 1.20 (.047) 1.00 (.039) 2.80 (.110) Function 3 (NO) Actuator marking available on IRP models (symbol 12 mm max.). On request. Flat O16.00 (.630DIA) 14.60 (.574) Normally open 3.60 (.141) 2.00 (.078) Also available with straight PC terminals : IR*3P4 and quick-connect terminals : IR*3Z4. Flat O16.00x100SI (.630DIAx100IS) O16.00 (.630DIA) O19.80 (.779DIA) Normally open Flat actuator IRP3F4 Normally open 14.80 (.582) Curved actuator IRR3F4 13.00 (.511) 5.00 (.196) Sealed flying lead terminals - gold plated contacts 2.00 (.078) 5.08 (.200) Flat Screw terminals - silver contacts O19.80 (.779DIA) O16.00x100SI (.630DIAx100IS) Flat actuator IRP3V2 Normally open 5.00 (.196) Normally open O16.00 (.630DIA) 23.50 Maxi (.925MAX) Curved actuator IRR3V2 14.60 (.574) 2.00 (.078) Flat actuator IRP3S4 Normally open 14.80 (.582) Curved actuator IRR3S4 O19.80 (.779DIA) 5.00 (.196) O16.00x100SI (.630DIAx100IS) 2.00 (.078) Solder lug terminals - gold plated contacts 500.0010.00 (19.685.393) B MODEL STRUCTURE 14.60 (.574) Actuator colour and bushing/bezel finish : select the desired codes on previous page. B-58 www.apem.com APEM IR series New! Sealed pushbutton switches - bushing O 16 mm - momentary - standard version Square - illuminated * Five LED colours * Tin plated LED terminals * Gold plated contacts LED Cathode (-) Function 3 (NO) MODEL STRUCTURE B Flat O16.00x100SI (.630DIAx100IS) 19.80 (.779SQUARE) 5.00 (.196) Normally Open NO 3.60 (.141) NO 4.50 (.177) 14.80 (.582) IRC3S4 16.00 (.630SQUARE) 2.00 (.078) Solder lug terminals LED Cathode (-) 14.60 (.574) 2.00 (.078) 2.00 (.078) Also available with straight PC terminals : IRC3P4. LED colour is indicated by the bottom of the switch. O16.00x100SI (.630DIAx100IS) 5.00 (.196) 16.00 (.630SQUARE) 2.00 (.078) Flat Sealed flying lead terminals Normally Open 23.00 (.905) IRC3F4 14.60 (.574) 500.0010.00 (19.685.393) 13.80 (.543DIA) Wire colours : black : NO contact, red : LED anode (+), blue : LED cathode (-) 19.80 (.779SQUARE) ACTUATOR COLOUR 1 : blue - B : dark blue - 2 : black - 3 : green - 5 : yellow - 6 : red - 7 : white - 9 : orange BUSHING AND BEZEL FINISH LED COLOUR 2 : black (standard) - 7 : white L0S : super red - L0Y : yellow - L0G : green - L0B : blue L0W : white APEM www.apem.com B-59 IR series New! Sealed pushbutton switches - bushing O 16 mm - momentary - standard version Square - non-illuminated 1.20 (.047) 1.00 (.039) 2.80 (.110) Function 3 (NO) MODEL STRUCTURE Flat 16.00 (.630SQUARE) Normally Open 14.80 (.582) IRC3S4 19.80 (.779SQUARE) 5.00 (.196) O16.00x100SI (.630DIAx100IS) 2.00 (.078) Solder lug terminals - gold plated contacts 14.60 (.574) 3.60 (.141) 5.08 (.200) 2.00 (.078) Also available with straight PC terminals : IRC3P4 or quick-connect terminals : IRC3Z4. Flat 16.00 (.630SQUARE) Normally Open 14.80 (.582) IRC3F4 19.80 (.779SQUARE) 5.00 (.196) O16.00x100SI (.630DIAx100IS) 2.00 (.078) Sealed flying lead terminals - gold plated contacts 500.0010.00 (19.685.393) 14.60 (.574) O16.00x100SI (.630DIAx100IS) 19.80 (.779SQUARE) 5.00 (.196) Normally Open 23.50 Maxi (.925MAX) IRC3V2 16.00 (.630SQUARE) 2.00 (.078) Flat Screw terminals - silver contacts 13.00 (.511) B 2.40 (.094) Quick-connect Z 7.10 (.279) 3.40 (.133) Straight P 14.60 (.574) Actuator colour and bushing/bezel finish : select the desired codes on previous page. B-60 www.apem.com APEM IR series New! Sealed pushbutton switches - bushing O 16 mm - momentary - microswitch version Distinctive features and specifications Microswitch technology up to 5A Tactile feedback Sealed to IP67 Illuminated or non-illuminated Flat round actuator for optional marking B ENVIRONMENTAL SPECIFICATIONS GENERAL SPECIFICATIONS * Front panel sealing : IP67 according to IEC 60529 * Salt spray : IEC 512-6, test 11f * Operating temperature : -20C to +85C * Panel thickness : 3 mm (.118) max. * Total travel : 1,6 mm (.062) +/- 0,3 mm * Typical operating force : 4N +/- 2N * Mechanical life : 1.000.000 cycles * Torque : 0,8 Nm max. applied to nut * Soldering : 320C max. for 3 sec. ELECTRICAL SPECIFICATIONS * Max. current/voltage rating with resistive load : 5A 250VAC, 50.000 cycles (function 7) 5A 250VAC, 25.000 cycles (function 8) * Initial contact resistance : 100 m max. * Insulation resistance : 1 G min. at 500VDC * Dielectric strength : 750 Vrms between terminals 2.000 Vrms between terminals and frame MATERIALS * Case : thermoplastic UL94-V0 * Actutor : polyamide 6/6 * Bushing/bezel : polyamide 6/6 * Contacts : silver * Lens : polycarbonate LED COMPONENT SPECIFICATIONS LED colour Forward current Typ. forward voltage Max. forward voltage Super red (L0S) 20mA 2V 2,5V Yellow (L0Y) 20mA 2V 2,5V Green (L0G) 10mA 2V 2,5V Blue (L0B) 10mA 3,3V 3,8V A resistor must be series-connected by the user. Resistor value = supply voltage - LED forward voltage LED forward current PANEL CUT-OUT MATRIX MOUNTING Flat seal 14.80 (.582) 27.00 (1.063) 1 3.00 Maxi (.118 max.) 27.00 (1.063) 14.80 (.582) O16.20 (.637) O16.20 (.637DIA) APEM www.apem.com B-61 IR series New! Sealed pushbutton switches - bushing O 16 mm - momentary - microswitch version Overview IR Electrical function Actuator shape SERIES C R P Square Round, curved Round, flat 7 8 Terminals NC + NO (3 terminals) NC/NO combined (4 terminals) Z Solder lug or quick-connect Contacts 2 Silver B Actuator colour 1 B 2 3 5 6 7 9 Blue Dark blue Black Green Yellow Red White Orange Bushing & bezel finish 2 7 Black (std) White Other : on request. LED colour Blank L0S L0Y L0G L0B Non-illum. Super red Yellow Green Blue Other : on request. The IR series for high currents is based on a microswitch. Please note that this microswitch is supplied separately. ABOUT THIS SERIES On the following pages, you will find successively : model structure of switches and options in the same order as in above chart : please note that not all combinations of above numbers are available. Refer to the following pages for further information. NOTICE Mounting accessories : Standard hardware supplied : 1 hex nut 19 mm (.748) across flats and 1 flat seal. Hex nut P/N : U4116 Packaging unit : 25 pieces for flying lead models - 40 pieces for other models B-62 www.apem.com APEM IR series New! Sealed pushbutton switches - bushing O 16 mm - momentary - microswitch version Round - illuminated * Four LED colours * Tin plated LED terminals * Silver contacts Solder lug 2.50 (.098) Quick-connect 7.00 (.275) 6.45 (.254) 1.30 (.051) 1 4 2 Funct. 7 (NC+NO) 3 1 2 4 1.20 (.047) 2.80 (.110) Funct. 8 (NC/NO) 2.80 (.110) CIPCOSMS3Z CIPCOSMS4Z Funct. 7 (3 terminals) Funct. 8 (4 terminals) MODEL STRUCTURE Actuator marking available on IRP models (symbol 12 mm max.). On request. Flat O16.00 (.630DIA) 5.00 (.196) O19.80 (.779DIA) 2.00 (.078) Quick-connect terminals - NC+NO - 3 terminals 14.60 (.574) - 0.50 (.019) NC+NO + 1 0.5x0.5 (.019x.019) - 2.80 (.110) 9.55 (.376) Flat Solder lug terminals - NC/NO - 4 terminals 4 2 0.50 (.019) 5.70 (.224) O16.00 (.630DIA) 5.00 (.196) O19.80 (.779DIA) 2.00 (.078) Flat actuator IRP7Z2 O16.00x100SI (.630DIAx100IS) 8.50 (.334) NC+NO + 18.10 (.547) Curved actuator IRR7Z2 + - + - Flat actuator IRP8Z2 14.60 (.574) NC/NO combined O16.00x100SI (.630DIAx100IS) 3 2.80 (.110) Terminals should be used as solder lugs only. 1 2 0.50 (.019) 0.5x0.5 (.019x.019) 3.60 (.141) 4 6.45 (.254) NC/NO combined 18.20 (.547) Curved actuator IRR8Z2 0.50 (.019) 10.90 (.429) ACTUATOR COLOUR 1 : blue - B : dark blue - 2 : black - 3 : green - 5 : yellow - 6 : red - 7 : white - 9 : orange BUSHING AND BEZEL FINISH LED COLOUR 2 : black (standard) - 7 : white L0S : super red - L0Y : yellow - L0G : green - L0B : blue APEM www.apem.com B-63 B IR series New! Sealed pushbutton switches - bushing O 16 mm - momentary - microswitch version Round - non-illuminated * Silver contacts Solder lug 2.50 (.098) Quick-connect 7.00 (.275) 6.45 (.254) 1.30 (.051) 1 4 2 Funct. 7 (NC+NO) 1 2 4 1.20 (.047) 2.80 (.110) Funct. 8 (NC/NO) 2.80 (.110) CIPCOSMS3Z CIPCOSMS4Z Funct. 7 (3 terminals) Funct. 8 (4 terminals) MODEL STRUCTURE Actuator marking available on IRP models (symbol 12 mm max.). On request. Flat O16.00 (.630DIA) 14.60 (.574) O16.00x100SI (.630DIAx100IS) 1 0.50 (.019) 2.80 (.110) 4 9.55 (.376) Flat O16.00 (.630DIA) Flat actuator IRP8Z2 5.00 (.196) O19.80 (.779DIA) Curved actuator IRR8Z2 5.70 (.224) 2.00 (.078) Solder lug terminals - NC/NO - 4 terminals 2 8.50 (.334) NC+NO NC/NO combined 14.60 (.574) O16.00x100SI (.630DIAx100IS) NC/NO combined 3 2.80 (.110) 3.60 (.141) 1 2 10.90 (.429) 4 6.45 (.254) Flat actuator IRP7Z2 NC+NO 18.10 (.547) Curved actuator IRR7Z2 5.00 (.196) O19.80 (.779DIA) 2.00 (.078) Quick-connect terminals - NC+NO - 3 terminals 18.20 (.547) B 3 0.50 (.019) Terminals should be used as solder lugs only. ACTUATOR COLOUR 1 : blue - B : dark blue - 2 : black - 3 : green - 5 : yellow - 6 : red - 7 : white - 9 : orange BUSHING AND BEZEL FINISH 2 : black (standard) - 7 : white B-64 www.apem.com APEM IR series New! Sealed pushbutton switches - bushing O 16 mm - momentary - microswitch version Square - illuminated * Four LED colours * Tin plated LED terminals * Silver contacts Solder lug 2.50 (.098) Quick-connect 7.00 (.275) 6.45 (.254) 1.30 (.051) 1 4 2 Funct. 7 (NC+NO) 3 1 2 4 1.20 (.047) 2.80 (.110) Funct. 8 (NC/NO) 2.80 (.110) CIPCOSMS3Z CIPCOSMS4Z Funct. 7 (3 terminals) Funct. 8 (4 terminals) MODEL STRUCTURE B Flat 2.00 (.078) 16.00 (.629SQUARE) 19.80 (.779SQUARE) 5.00 (.196) Quick-connect terminals - NC+NO - 3 terminals NC+NO + 14.60 (.574) 18.10 (.547) IRC7Z2 O16.00x100SI (.630DIAx100IS) - 0.5x0.5 (.019x.019) 1 0.50 (.019) 2.80 (.110) 4 9.55 (.376) Flat 2 5.70 (.224) 16.00 (.629SQUARE) 19.80 (.779SQUARE) 5.00 (.196) 2.00 (.078) Solder lug terminals - NC/NO - 4 terminals 8.50 (.334) 0.50 (.019) O16.00x100SI (.630DIAx100IS) - 3 0.5x0.5 (.019x.019) 1 2 0.50 (.019) 2.80 (.110) 3.60 (.141) 4 6.45 (.254) + 14.60 (.574) 18.20 (.547) NC/NO combined IRC8Z2 0.50 (.019) 10.90 (.429) Terminals should be used as solder lugs only. ACTUATOR COLOUR 1 : blue - B : dark blue - 2 : black - 3 : green - 5 : yellow - 6 : red - 7 : white - 9 : orange BUSHING AND BEZEL FINISH LED COLOUR 2 : black (standard) - 7 : white L0S : super red - L0Y : yellow - L0G : green - L0B : blue APEM www.apem.com B-65 IR series New! Sealed pushbutton switches - bushing O 16 mm - momentary - microswitch version Square - non-illuminated * Silver contacts Solder lug 2.50 (.098) Quick-connect 7.00 (.275) 6.45 (.254) 1.30 (.051) 1 4 2 Funct. 7 (NC+NO) 1 2 4 1.20 (.047) 2.80 (.110) Funct. 8 (NC/NO) 2.80 (.110) CIPCOSMS3Z CIPCOSMS4Z Funct. 7 (3 terminals) Funct. 8 (4 terminals) MODEL STRUCTURE Flat 2.00 (.078) 16.00 (.629SQUARE) 19.80 (.779SQUARE) 5.00 (.196) Quick-connect terminals - NC+NO - 3 terminals O16.00x100SI (.630DIAx100IS) 1 0.50 (.019) 2.80 (.110) 9.55 (.376) Flat 2 5.70 (.224) 16.00 (.629SQUARE) 19.80 (.779SQUARE) 5.00 (.196) Solder lug terminals - NC/NO - 4 terminals 4 8.50 (.334) 14.60 (.574) 2.00 (.078) NC+NO 18.10 (.547) IRC7Z2 NC/NO combined 14.60 (.574) O16.00x100SI (.630DIAx100IS) 3 1 2 4 6.45 (.254) IRC8Z2 18.20 (.547) B 3 0.50 (.019) Terminals should be used as solder lugs only. 2.80 (.110) 3.60 (.141) 10.90 (.429) ACTUATOR COLOUR 1 : blue - B : dark blue - 2 : black - 3 : green - 5 : yellow - 6 : red - 7 : white - 9 : orange BUSHING AND BEZEL FINISH 2 : black (standard) - 7 : white B-66 www.apem.com APEM IR series New! Sealed pushbutton switches - bushing O 16 mm - latching Distinctive features and specifications UG1006-A Latching action models Sealed to IP67 Illuminated or non-illuminated Flat round actuator for optional marking B ENVIRONMENTAL SPECIFICATIONS GENERAL SPECIFICATIONS * Front panel sealing : IP67 according to IEC 60529 * Shock resistance : 100 g according to IEC 512-4, test 6c * Vibration resistance : 10-500Hz - 10 g according to IEC 512-4, test 6d * Salt spray : IEC 512-6, test 11f * Operating temperature : -40C to +85C * Panel thickness : 8 mm (.314) max. * Total travel : 2,5 mm (.098) +/- 0,3 mm * Typical operating force : 5N +/- 2N * Mechanical life : 200.000 cycles * Torque : 0,8 Nm max. applied to nut * Soldering : 320C max. for 3 sec. ELECTRICAL SPECIFICATIONS MATERIALS * Max. current/voltage rating with resistive load : 100mA 24VDC - 200.000 cycles * Initial contact resistance : 100 m max. * Insulation resistance : 1 G min. at 500VDC * Dielectric strength : 1.500 Vrms between terminals LED COMPONENT SPECIFICATIONS LED colour Forward current Super red (L0S) 20mA Typ. forward voltage Max. forward voltage 1,95V 1,95V Yellow (L0Y) 20mA 2V 2,05V Green (L0G) 20mA 3,2V 3,70V Blue (L0B) 20mA 3,2V 4V * Case : thermoplastic UL94-V0 * Plunger : polyamide * Bushing/bezel : polyamide * Contacts : silver, gold plated * Multi-wire lead AWG20, section 0,6 mm2 * LED wire : AWG26, section 0,12 mm2 * Lens : polycarbonate * Terminal seal : epoxy A resistor must be series-connected by the user. Resistor value = supply voltage - LED forward voltage LED forward current On flying lead versions, the LED resistor can be integrated by APEM on request. PANEL CUT-OUT MATRIX MOUNTING Flat seal 14.80 (.582) 27.00 (1.063) 1 8.00 Maxi (.314 max.) 27.00 (1.063) 14.80 (.582) O16.20 (.637) O16.20 (.637DIA) APEM www.apem.com B-67 IR series New! Sealed pushbutton switches - bushing O 16 mm - latching Overview IR Electrical function Actuator shape SERIES C R P Square Round, curved Round, flat 1 Terminals ON - OFF S F P Z Solder lugs Flying leads Straight PC Quick-connect Contacts 4 Silver, gold plated B Actuator colour 1 B 2 3 5 6 7 8 9 A Blue Dark blue Black Green Yellow Red White Bright chrome Orange Satin chrome Bushing & bezel finish 2 Black (standard) Other : on request. LED colour Blank L0S L0Y L0G L0B Non-illum. Super red Yellow Green Blue ABOUT THIS SERIES On the following pages, you will find successively : model structure of switches and options in the same order as in above chart Dimensions : first dimensions are in mm while inches are shown as bracketted numbers. : please note that not all combinations of above numbers are available. Refer to the following pages for further information. NOTICE Mounting accessories : Standard hardware supplied : 1 hex nut 19 mm (.748) across flats and 1 flat seal Hex nut P/N U4116. Packaging unit : 25 pieces for flying lead models - 40 pieces for other models B-68 www.apem.com APEM IR series New! Sealed pushbutton switches - bushing O 16 mm - latching Round - illuminated Quick-connect Z 3.20 (.125) ON 2.80 (.110) 1.10X0.50 (.043X.019) 8.40 (.330) 2.40 (.094) 4.20 (.165) 2.30 (.090) 1.40 (.055) OFF Straight P Solder lug S 3.40 (.133) * Four LED colours * Tin plated LED terminals * Gold plated contacts 1.20 (.047) 2.80 (.110) MODEL STRUCTURE Plunger marking available on IRP models (symbol 12 mm max.). On request. Flat Solder lug terminals O16.00 (.630DIA) OFF - O19.80 (.779DIA) 5.00 (.196) - ON 14.60 (.574) 17.50 (.688) Flat actuator IRP1S4 OFF 13.00 (.512) Curved actuator IRR1S4 2.00 (.078) O16.00x100SI (.630DIAx100IS) ON (+) (-) 3.20 (.125) EPOXY Also available with straight PC terminals : IR*1P4 & quick-connect terminals : IR*1Z4. O16.00 (.630DIA) OFF - ON 13.00 (.512) - ON Wire colours : black : contact, red : LED anode (+), blue : LED cathode (-) 24.00 maxi (.944MAX.) Flat actuator IRP1F4 OFF 14.60 (.574) 500.0010.00 (19.685.393) Curved actuator IRR1F4 O19.80 (.779DIA) 5.00 (.196) O16.00x100SI (.630DIAx100IS) 2.00 (.078) Flat Sealed flying lead terminals ACTUATOR COLOUR 1 : blue - B : dark blue - 2 : black - 3 : green - 5 : yellow - 6 : red - 7 : white - 8 : bright chrome - 9 : orange A : satin chrome BUSHING AND BEZEL FINISH LED COLOUR 2 : black (standard) L0S : super red - L0Y : yellow - L0G : green - L0B : blue APEM www.apem.com B-69 B IR series New! Sealed pushbutton switches - bushing O 16 mm - latching Round - non-illuminated * Gold plated contacts Straight P 8.40 (.330) 2.80 (.110) MODEL STRUCTURE Plunger marking available on IRP models (symbol 12 mm max.). On request. O16.00 (.630DIA) OFF - - ON 14.60 (.574) 17.50 (.688) Flat actuator IRP1S4 OFF 13.00 (.512) Curved actuator IRR1S4 O19.80 (.779DIA) 5.00 (.196) O16.00x100SI (.630DIAx100IS) 2.00 (.078) Flat Solder lug terminals ON 3.20 (.125) EPOXY Also available with straight PC terminals : IR*1P4 & quick-connect terminals : IR*1Z4. O16.00 (.630DIA) OFF - - ON ON 24.00 maxi (.944MAX.) Flat actuator IRP1F4 OFF 13.00 (.512) Curved actuator IRR1F4 O19.80 (.779DIA) 5.00 (.196) O16.00x100SI (.630DIAx100IS) 2.00 (.078) Flat Sealed flying lead terminals 14.60 (.574) 500.0010.00 (19.685.393) B 2.40 (.094) 1.10X0.50 (.043X.019) 2.80 (.110) 1.20 (.047) 3.40 (.133) 1.40 (.055) ON 3.20 (.125) OFF Quick-connect Z 4.20 (.165) 2.30 (.090) Solder lug S ACTUATOR COLOUR 1 : blue - B : dark blue - 2 : black - 3 : green - 5 : yellow - 6 : red - 7 : white - 8 : bright chrome - 9 : orange A : satin chrome BUSHING AND BEZEL FINISH 2 : black (standard) B-70 www.apem.com APEM IR series New! Sealed pushbutton switches - bushing O 16 mm - latching Square - illuminated Quick-connect Z 3.20 (.125) ON 2.80 (.110) 1.10X0.50 (.043X.019) 8.40 (.330) 2.40 (.094) 4.20 (.165) 2.30 (.090) 1.40 (.055) OFF Straight P Solder lug S 1.20 (.047) 3.40 (.133) * Four LED colours * Tin plated LED terminals * Gold plated contacts 2.80 (.110) MODEL STRUCTURE B O16.00x100SI (.630DIAx100IS) 19.80 (.779SQUARE) 5.00 (.196) - ON 14.60 (.574) 17.50 (.688) OFF 13.00 (.512) Curved actuator IRC1S4 16.00 (.630SQUARE) 2.00 (.078) Flat Solder lug terminals (+) Also available with straight PC terminals : IRC1P4 & quick-connect terminals : IRC1Z4. (-) 3.20 (.125) EPOXY O16.00x100SI (.630DIAx100IS) 19.80 (.779SQUARE) - ON Wire colours : black : contact, red : LED anode(+), blue : LED cathode (-) 24.00 maxi (.944MAX.) OFF 14.60 (.574) 500.0010.00 (19.685.393) Curved actuator IRC1F4 13.00 (.512) 5.00 (.196) 16.00 (.630SQUARE) 2.00 (.078) Flat Sealed flying lead terminals ACTUATOR COLOUR 1 : blue - B : dark blue - 2 : black - 3 : green - 5 : yellow - 6 : red - 7 : white - 8 : bright chrome - 9 : orange A : satin chrome BUSHING AND BEZEL FINISH LED COLOUR 2 : black (standard) L0S : super red - L0Y : yellow - L0G : green - L0B : blue APEM www.apem.com B-71 IR series New! Sealed pushbutton switches - bushing O 16 mm - latching Square - non-illuminated * Gold plated contacts Straight P 2.80 (.110) 8.40 (.330) 1.20 (.047) 2.80 (.110) MODEL STRUCTURE O16.00x100SI (.630DIAx100IS) 19.80 (.779SQUARE) 5.00 (.196) - ON 14.60 (.574) 17.50 (.688) OFF 13.00 (.512) Curved actuator IRC1S4 16.00 (.630SQUARE) 2.00 (.078) Flat Solder lug terminals 3.20 (.125) EPOXY Flat Sealed flying lead terminals O16.00x100SI (.630DIAx100IS) 19.80 (.779SQUARE) OFF - ON 24.00 maxi (.944MAX.) Curved actuator IRC1F4 13.00 (.512) 5.00 (.196) 16.00 (.630SQUARE) 2.00 (.078) Also available with straight PC terminals : IRC1P4 & quick-connect terminals : IRC1Z4. 14.60 (.574) 500.0010.00 (19.685.393) B 2.40 (.094) 1.10X0.50 (.043X.019) 3.40 (.133) 1.40 (.055) ON 3.20 (.125) OFF Quick-connect Z 4.20 (.165) 2.30 (.090) Solder lug S ACTUATOR COLOUR 1 : blue - B : dark blue - 2 : black - 3 : green - 5 : yellow - 6 : red - 7 : white - 8 : bright chrome - 9 : orange A : satin chrome BUSHING AND BEZEL FINISH 2 : black (standard) B-72 www.apem.com APEM