IR series
Sealed pushbutton switches - bushing Ø 16 mm - momentary
Distinctive features
B-54 APEMwww.apem.com
B
New!
The IR series is a range of sealed momentary pushbutton switches with dia. 16 mm bushing. This
series is divided into 2 families : standard models and microswitch technology models.
Common features
• Sealed to IP67
• Illuminated or non-illuminated
• Tactile feedback
• Square or round actuator
• Wide choice of bezel and actuator colours
• Wide choice of illumination colours
Standard versions
• Numerous terminal options :
solder, flying lead, straight PC, quick-
connect, screw
• Screw versions withstanding up to 4A
• Electrical function : NO (2 terminals)
Microswitch versions
• Withstanding up to 5A
• Two electrical functions :
NC+NO (3 terminals)
NC/NO combined (4 terminals)
Optional marking
Actuator marking is available on request
for models with flat round actuator.
Integrated resistor
On wire lead illuminated versions, the LED
resistor can be integrated in the product by
APEM. On request.
NO - Screw terminals NO - Illuminated
Wire lead terminals
NC+NO - 3 terminals NC/NO - 4 terminals - Illuminated
(.472DIA MAX.)
Ø12.00 Maxi
Standard version Microswitch version
NO - Solder lug
terminals
UG1006-A
IR series
Sealed pushbutton switches - bushing Ø 16 mm - momentary - standard version
Distinctive features and specifications
APEM www.apem.com B-55
❑
Screw version up to 4A
❑
Tactile feedback
❑
Sealed to IP67
❑
Illuminated or non-illuminated
❑
Flat round actuator for optional marking
ENVIRONMENTAL SPECIFICATIONS
• Front panel sealing : IP67 according to IEC 60529
• Shock resistance : 100 g according to IEC 512-4, test 6c
• Vibration resistance : 10-500Hz - 10 g according to IEC 512-4, test 6d
• Salt spray : IEC 512-6, test 11f
• Operating temperature : -40°C to +85°C
ELECTRICAL SPECIFICATIONS
• Max. current/voltage rating with resistive load :
- Gold plated silver contacts (code 4) : 200mA 48VDC - 200mA 250VAC
- Silver contacts (code 2) - screw terminals : 2A 250VAC - 4A 48VDC
• Electrical life at full load : 500.000 cycles
• Initial contact resistance : 100 mΩ max.
• Insulation resistance : 1 GΩ min. at 500VDC
• Dielectric strength : 1.500 Vrms
MATERIALS
• Case : thermoplastic UL94-V0
• Actuator :
polyamide
6/6
• Bushing/bezel : polyamide 6/6
• Contacts :
4: silver, gold plated
2: silver (screw terminals)
• Multi-wire lead AWG20,
section 0,6 mm2
• LED wire : AWG26,
section 0,12 mm2
• Lens : polycarbonate
• Terminal seal : epoxy
GENERAL SPECIFICATIONS
• Panel thickness : 8 mm (.314) max.
• Total travel : 1,6 mm (.062) +/- 0,3 mm
• Typical operating force : 4N +/- 2N
• Mechanical life : 1.000.000 cycles
• Torque : 0,8 Nm max. applied to nut
• Soldering : 320°C max. for 3 sec.
LED COMPONENT SPECIFICATIONS
LED colour
Forward current
Super red (L0S) 20mA
20mA
20mA
20mA
Typ. forward voltage Max. forward voltage
2,1V
2,1V
2,1V
3,2V
Yellow (L0Y)
Green (L0G)
Blue (L0B)
20mA 3,35V
2,3V
2,3V
2,3V
3,8V
4,25VWhite (L0W)
A resistor must be series-connected by the user.
Resistor value = supply voltage - LED forward voltage
LED forward current
On flying lead versions, the LED resistor can be integrated by APEM on request.
PANEL CUT-OUT MATRIX MOUNTING
(1.063)
27.00
27.00
(1.063)
Ø16.20
(.637)
14.80
(.582)
➀ Flat seal
(.637DIA)
Ø16.20
14.80
(.582)
1
8.00 Maxi
(.314 max.)
B
New!
IR series
Sealed pushbutton switches - bushing Ø 16 mm - momentary - standard version
Overview
B-56 APEMwww.apem.com
B
New!
IR
SERIES
Actuator shape
CSquare
RRound, curved
PRound, flat
Terminals
SSolder lugs
FFlying leads
PStraight PC
ZQuick-connect
(non-illuminated)
VScrew (non-illuminated)
Electrical function
3Normally open
(NO)
Actuator colour
1Blue
BDark blue
2Black
3Green
5Yellow
6Red
7White
9Orange
Other : on request.
Contacts
4Silver, gold plated
2Silver (screw
terminals only)
LED colour
Blank Non-illum.
L0S Super red
L0Y Yellow
L0G Green
L0B Blue
L0W White
ABOUTTHISSERIES
On the following pages, you will find successively :
model structure of switches and options in the same order as in above chart
Mounting accessories : Standard hardware supplied : 1 hex nut 19 mm (.748) across flats and 1 flat seal
Hex nut P/N U4116.
Packaging unit : 25 pieces for flying lead models - 40 pieces for other models
NOTICE : please note that not all combinations of above numbers are available.
Refer to the following pages for further information.
Bushing & bezel finish
2Black (std)
7White
Other : on request.
IR series
Sealed pushbutton switches - bushing Ø 16 mm - momentary - standard version
Round - illuminated
APEM www.apem.com B-57
MODEL
STRUCTURE
• Five LED colours
• Tin plated LED terminals
• Gold plated contacts
Solder lug terminals
3.60
(.141)
2.00
(.574)
14.60
5.00
14.80
(.196)
(.582)
(.078)
Ø16.00x100SI
(.630DIAx100IS)
Ø16.00
(.630DIA)
Ø19.80
(.779DIA)
2.00
(.078)
(.078)
2.00
NONO
(.177)
4.50
LED Cathode (-)
➞Flat
Curved actuator
IRR3S4 Normally Open
Flat actuator
IRP3S4 Normally Open
Sealed flying lead terminals
500.00±10.00
(19.685±.393)
2.00
(.574)
14.60
5.0023.00
(.196)(.905)
(.078)
Ø16.00x100SI
(.630DIAx100IS)
Ø16.00
(.630DIA)
Ø19.80
(.779DIA)
(.511)
13.00
➞Flat
ACTUATOR COLOUR
1: blue - B: dark blue - 2: black - 3: green - 5: yellow - 6: red - 7: white - 9: orange
Wire colours : black : NO contact,
red : LED anode (+), blue : LED cathode (-)
(-)
Cathode
LED
LED COLOUR
L0S : super red - L0Y : yellow - L0G : green - L0B : blue
L0W : white
BUSHING AND BEZEL FINISH
2: black (standard) - 7 : white
Actuator marking available on IRP models (symbol 12 mm max.). On request.
Curved actuator
IRR3F4 Normally Open
Flat actuator
IRP3F4 Normally Open
Function 3 (NO)
Also available with straight PC terminals : IR•3P4.
LED colour is indicated by the bottom of the switch.
B
New!
IR series
Sealed pushbutton switches - bushing Ø 16 mm - momentary - standard version
Round - non-illuminated
B-58 APEMwww.apem.com
B
New!
Function 3 (NO)
MODEL
STRUCTURE
Solder lug terminals - gold plated contacts
3.60
(.141)
2.00
(.574)
14.60
5.00
14.80
(.196)
(.582)
(.078)
Ø16.00x100SI
(.630DIAx100IS)
Ø16.00
(.630DIA)
Ø19.80
(.779DIA)
5.08
(.200)
(.078)
2.00
➞Flat
Curved actuator
IRR3S4 Normally open
Flat actuator
IRP3S4 Normally open
Sealed flying lead terminals - gold plated contacts
2.00
(.574)
14.60
5.00
(.196)
(.078)
Ø16.00x100SI
(.630DIAx100IS)
Ø16.00
(.630DIA)
Ø19.80
(.779DIA)
(.511)
13.00
(.582)
14.80
(19.685±.393)
500.00±10.00
➞Flat
Curved actuator
IRR3F4 Normally open
Flat actuator
IRP3F4 Normally open
(.133)
3.40
1.00
(.039)
(.094)
(.047)
2.40
1.20
(.110)
2.80
7.10
(.279)
Straight PQuick-connect Z
Also available with straight PC terminals :
IR•3P4 and quick-connect terminals : IR•3Z4.
Actuator marking available on IRP models (symbol 12 mm max.). On request.
Screw terminals - silver contacts
(.630DIA)
Ø16.00
(.078)
14.60
(.574)
2.00
(.925MAX) (.196)
23.50 Maxi 5.00
(.779DIA)
Ø19.80
(.630DIAx100IS)
Ø16.00x100SI
➞Flat
Curved actuator
IRR3V2 Normally open
Flat actuator
IRP3V2 Normally open
Actuator colour and bushing/bezel finish : select the desired codes on previous page.
IR series
Sealed pushbutton switches - bushing Ø 16 mm - momentary - standard version
Square - illuminated
APEM www.apem.com B-59
MODEL
STRUCTURE
• Five LED colours
• Tin plated LED terminals
• Gold plated contacts
Solder lug terminals ➞Flat
IRC3S4 Normally Open
Sealed flying lead terminals ➞Flat
IRC3F4 Normally Open
ACTUATOR COLOUR
1: blue - B: dark blue - 2: black - 3: green - 5: yellow - 6: red - 7: white - 9: orange
LED COLOUR
L0S : super red - L0Y : yellow - L0G : green - L0B : blue
L0W : white
Wire colours : black : NO contact,
red : LED anode (+), blue : LED cathode (-)
(-)
Cathode
LED
BUSHING AND BEZEL FINISH
2: black (standard) - 7 : white
2.00
(.574)
14.60
5.00
14.80
(.196)
(.582)
(.078)
Ø16.00x100SI
(.630DIAx100IS)
16.00
(.630SQUARE)
19.80
(.779SQUARE)
LED Cathode (-)
4.50
(.177)
NO NO
2.00
(.078)
(.078)
2.00
(.141)
3.60
(.630SQUARE)
16.00
(.630DIAx100IS)
Ø16.00x100SI
(.078)
(.905) (.196)
23.00 5.00
14.60
(.574)
2.00
(19.685±.393)
500.00±10.00
(.543DIA)
13.80
19.80
(.779SQUARE)
Function 3 (NO)
Also available with straight PC terminals : IRC3P4.
LED colour is indicated by the bottom of the switch.
B
New!
IR series
Sealed pushbutton switches - bushing Ø 16 mm - momentary - standard version
Square - non-illuminated
B-60 APEMwww.apem.com
B
New!
MODEL
STRUCTURE
Solder lug terminals - gold plated contacts
2.00
(.574)
14.60
5.0014.80
(.196)(.582)
(.078)
Ø16.00x100SI
(.630DIAx100IS)
16.00
(.630SQUARE) 19.80
(.779SQUARE)
(.078)
2.00
(.141)
3.60
5.08
(.200)
➞Flat
IRC3S4 Normally Open
Sealed flying lead terminals - gold plated contacts
500.00±10.00
(19.685±.393)
2.00
(.574)
14.60
5.00
14.80
(.196)
(.582)
(.078)
Ø16.00x100SI
(.630DIAx100IS)
16.00
(.630SQUARE)
19.80
(.779SQUARE)
➞Flat
IRC3F4 Normally Open
(.133)
3.40
1.00
(.039)
(.094)
(.047)
2.40
1.20
(.110)
2.80
7.10
(.279)
Straight PQuick-connect Z
Also available with straight PC terminals :
IRC3P4 or quick-connect terminals : IRC3Z4.
Screw terminals - silver contacts
Ø16.00x100SI
(.630DIAx100IS)
5.00
23.50 Maxi
(.196)(.925MAX)
2.00
(.574)
14.60
(.078)
19.80
(.779SQUARE)
16.00
(.630SQUARE)
(.511)
13.00
➞Flat
IRC3V2 Normally Open
Actuator colour and bushing/bezel finish : select the desired codes on previous page.
Function 3 (NO)
IR series
Sealed pushbutton switches - bushing Ø 16 mm - momentary - microswitch version
Distinctive features and specifications
APEM www.apem.com B-61
❑
Microswitch technology up to 5A
❑
Tactile feedback
❑
Sealed to IP67
❑
Illuminated or non-illuminated
❑
Flat round actuator for optional marking
ENVIRONMENTAL SPECIFICATIONS
• Front panel sealing : IP67 according to IEC 60529
• Salt spray : IEC 512-6, test 11f
• Operating temperature : -20°C to +85°C
ELECTRICAL SPECIFICATIONS
• Max. current/voltage rating with resistive load :
5A 250VAC, 50.000 cycles (function 7)
5A 250VAC, 25.000 cycles (function 8)
• Initial contact resistance : 100 mΩ max.
• Insulation resistance : 1 GΩ min. at 500VDC
• Dielectric strength : 750 Vrms between terminals
2.000 Vrms between terminals and frame
MATERIALS
• Case : thermoplastic UL94-V0
• Actutor :
polyamide
6/6
• Bushing/bezel : polyamide 6/6
• Contacts : silver
• Lens : polycarbonate
GENERAL SPECIFICATIONS
• Panel thickness : 3 mm (.118) max.
• Total travel : 1,6 mm (.062) +/- 0,3 mm
• Typical operating force : 4N +/- 2N
• Mechanical life : 1.000.000 cycles
• Torque : 0,8 Nm max. applied to nut
• Soldering : 320°C max. for 3 sec.
LED COMPONENT SPECIFICATIONS
LED colour
Forward current
Super red (L0S) 20mA
20mA
10mA
10mA
Typ. forward voltage
2V
2V
2V
3,3V
Max. forward voltage
2,5V
2,5V
2,5V
3,8V
Yellow (L0Y)
Green (L0G)
Blue (L0B)
A resistor must be series-connected by the user.
Resistor value = supply voltage - LED forward voltage
LED forward current
PANEL CUT-OUT MATRIX MOUNTING
(1.063)
27.00
27.00
(1.063)
Ø16.20
(.637)
14.80
(.582)
➀ Flat seal
(.637DIA)
Ø16.20
14.80
(.582)
3.00 Maxi
(.118 max.)
1
B
New!
IR series
Sealed pushbutton switches - bushing Ø 16 mm - momentary - microswitch version
Overview
B-62 APEMwww.apem.com
B
New!
IR
SERIES
Actuator shape
CSquare
RRound, curved
PRound, flat
Terminals
ZSolder lug or
quick-connect
Electrical function
7NC + NO
(3 terminals)
8NC/NO combined
(4 terminals)
Contacts
2Silver
ABOUTTHISSERIES
On the following pages, you will find successively :
model structure of switches and options in the same order as in above chart
Mounting accessories : Standard hardware supplied : 1 hex nut 19 mm (.748) across flats and 1 flat seal.
Hex nut P/N : U4116
Packaging unit : 25 pieces for flying lead models - 40 pieces for other models
NOTICE : please note that not all combinations of above numbers are available.
Refer to the following pages for further information.
The IR series for high currents is based on a microswitch. Please note that this microswitch is supplied separately.
Actuator colour
1Blue
BDark blue
2Black
3Green
5Yellow
6Red
7White
9Orange
Other : on request.
Bushing & bezel finish
2Black (std)
7White
Other : on request.
LED colour
Blank Non-illum.
L0S Super red
L0Y Yellow
L0G Green
L0B Blue
IR series
Sealed pushbutton switches - bushing Ø 16 mm - momentary - microswitch version
Round - illuminated
APEM www.apem.com B-63
MODEL
STRUCTURE
• Four LED colours
• Tin plated LED terminals
• Silver contacts
Quick-connect terminals - NC+NO - 3 terminals ➞Flat
Curved actuator
IRR7Z2 NC+NO
Flat actuator
IRP7Z2 NC+NO
Solder lug terminals - NC/NO - 4 terminals ➞Flat
Curved actuator
IRR8Z2 NC/NO combined
Flat actuator
IRP8Z2 NC/NO combined
ACTUATOR COLOUR
1: blue - B: dark blue - 2: black - 3: green - 5: yellow - 6: red - 7: white - 9: orange
Ø16.00x100SI
(.630DIAx100IS)
(.574)
14.60
241
(.376)
9.55
2.00
5.00
18.10
(.196)
(.547)
(.078)
Ø16.00
(.630DIA)
Ø19.80
(.779DIA)
(.334)
8.50
2.80
(.110)
(.019)
0.50
5.70
(.224)
(.019x.019)
0.5x0.5
(.019)
0.50
(.141)
3.60
0.50
(.019)
(.110)
2.80
6.45
(.254)
(.779DIA)
Ø19.80 (.630DIA)
Ø16.00
(.078)
(.547) (.196)
18.20 5.00
2.00
10.90
(.429)
31 24
14.60
(.574)
(.630DIAx100IS)
Ø16.00x100SI
(.019)
0.50
0.5x0.5
(.019x.019)
CIPCOSMS4Z
6.45
(.254)
(.110)
2.80
2.50
(.098)
1.20
(.047)
CIPCOSMS3Z
(.275)
7.00
(.110)
2.80
1.30
(.051)
Quick-connect Solder lug
Funct. 7 (3 terminals) Funct. 8 (4 terminals)
LED COLOUR
L0S : super red - L0Y : yellow - L0G : green - L0B : blue
BUSHING AND BEZEL FINISH
2: black (standard) - 7 : white
Actuator marking available on IRP models (symbol 12 mm max.). On request.
Funct. 7 (NC+NO) Funct. 8 (NC/NO)
+ -
+ -
-+
Terminals should be used as solder lugs only.
142 4213
-+
B
New!
IR series
Sealed pushbutton switches - bushing Ø 16 mm - momentary - microswitch version
Round - non-illuminated
B-64 APEMwww.apem.com
B
New!
MODEL
STRUCTURE
• Silver contacts
ACTUATOR COLOUR
1: blue - B: dark blue - 2: black - 3: green - 5: yellow - 6: red - 7: white - 9: orange
BUSHING AND BEZEL FINISH
2 : black (standard) - 7 : white
CIPCOSMS3Z
(.275)
7.00
(.110)
2.80
1.30
(.051)
CIPCOSMS4Z
6.45
(.254)
(.110)
2.80
2.50
(.098)
1.20
(.047)
Funct. 7 (3 terminals) Funct. 8 (4 terminals)
Quick-connect terminals - NC+NO - 3 terminals ➞Flat
Curved actuator
IRR7Z2 NC+NO
Flat actuator
IRP7Z2 NC+NO
Solder lug terminals - NC/NO - 4 terminals ➞Flat
Curved actuator
IRR8Z2 NC/NO combined
Flat actuator
IRP8Z2 NC/NO combined
Ø16.00x100SI
(.630DIAx100IS)
(.574)
14.60
241
(.376)
9.55
2.00
5.00
18.10
(.196)
(.547)
(.078)
Ø16.00
(.630DIA)
Ø19.80
(.779DIA)
(.334)
8.50
2.80
(.110)
(.019)
0.50
5.70
(.224)
(.141)
3.60
0.50
(.019)
(.110)
2.80
6.45
(.254)
(.779DIA)
Ø19.80 (.630DIA)
Ø16.00
(.078)
(.547) (.196)
18.20 5.00
2.00
10.90
(.429)
31 24
14.60
(.574)
(.630DIAx100IS)
Ø16.00x100SI
Actuator marking available on IRP models (symbol 12 mm max.). On request.
Funct. 7 (NC+NO) Funct. 8 (NC/NO)
Terminals should be used as solder lugs only.
Quick-connect Solder lug
142 4213
IR series
Sealed pushbutton switches - bushing Ø 16 mm - momentary - microswitch version
Square - illuminated
APEM www.apem.com B-65
MODEL
STRUCTURE
• Four LED colours
• Tin plated LED terminals
• Silver contacts
Quick-connect terminals - NC+NO - 3 terminals ➞Flat
IRC7Z2 NC+NO
Solder lug terminals - NC/NO - 4 terminals ➞Flat
IRC8Z2 NC/NO combined
ACTUATOR COLOUR
1: blue - B: dark blue - 2: black - 3: green - 5: yellow - 6: red - 7: white - 9: orange
Ø16.00x100SI
(.630DIAx100IS)
(.574)
14.60
241
(.376)
9.55
2.00
5.00
18.10
(.196)
(.547)
(.078)
(.334)
8.50
2.80
(.110)
(.019)
0.50
5.70
(.224)
(.019x.019)
0.5x0.5
(.019)
0.50
(.779SQUARE)
19.80
16.00
(.629SQUARE)
(.141)
3.60
0.50
(.019)
(.110)
2.80
6.45
(.254) (.078)
(.547) (.196)
18.20 5.00
2.00
10.90
(.429)
31 24
14.60
(.574)
(.630DIAx100IS)
Ø16.00x100SI
(.019)
0.50
0.5x0.5
(.019x.019)
19.80
(.779SQUARE)
(.629SQUARE)
16.00
LED COLOUR
L0S : super red - L0Y : yellow - L0G : green - L0B : blue
BUSHING AND BEZEL FINISH
2: black (standard) - 7 : white
CIPCOSMS4Z
6.45
(.254)
(.110)
2.80
2.50
(.098)
1.20
(.047)
CIPCOSMS3Z
(.275)
7.00
(.110)
2.80
1.30
(.051)
Funct. 7 (3 terminals) Funct. 8 (4 terminals)
142 4213
Funct. 7 (NC+NO) Funct. 8 (NC/NO)
Terminals should be used as solder lugs only.
Quick-connect Solder lug
+ -
-+
B
New!
IR series
Sealed pushbutton switches - bushing Ø 16 mm - momentary - microswitch version
Square - non-illuminated
B-66 APEMwww.apem.com
B
New!
MODEL
STRUCTURE
• Silver contacts
Quick-connect terminals - NC+NO - 3 terminals ➞Flat
IRC7Z2 NC+NO
Solder lug terminals - NC/NO - 4 terminals ➞Flat
IRC8Z2 NC/NO combined
ACTUATOR COLOUR
1: blue - B: dark blue - 2: black - 3: green - 5: yellow - 6: red - 7: white - 9: orange
BUSHING AND BEZEL FINISH
2: black (standard) - 7 : white
Ø16.00x100SI
(.630DIAx100IS)
(.574)
14.60
241
(.376)
9.55
2.00
5.00
18.10
(.196)
(.547)
(.078)
(.334)
8.50
2.80
(.110) 5.70
(.224)
(.019)
0.50
(.779SQUARE)
19.80
16.00
(.629SQUARE)
(.141)
3.60
0.50
(.019)
(.110)
2.80
6.45
(.254) (.078)
(.547) (.196)
18.20 5.00
2.00
10.90
(.429)
31 24
14.60
(.574)
(.630DIAx100IS)
Ø16.00x100SI
19.80
(.779SQUARE)
(.629SQUARE)
16.00
CIPCOSMS3Z
(.275)
7.00
(.110)
2.80
1.30
(.051)
CIPCOSMS4Z
6.45
(.254)
(.110)
2.80
2.50
(.098)
1.20
(.047)
Funct. 7 (3 terminals) Funct. 8 (4 terminals)
142 4213
Funct. 7 (NC+NO) Funct. 8 (NC/NO)
Terminals should be used as solder lugs only.
Quick-connect Solder lug
IR series
Sealed pushbutton switches - bushing Ø 16 mm - latching
Distinctive features and specifications
APEM www.apem.com B-67
B
New!
❑
Latching action models
❑
Sealed to IP67
❑
Illuminated or non-illuminated
❑
Flat round actuator for optional marking
ENVIRONMENTAL SPECIFICATIONS
• Front panel sealing : IP67 according to IEC 60529
• Shock resistance : 100 g according to IEC 512-4, test 6c
• Vibration resistance : 10-500Hz - 10 g according to IEC 512-4, test 6d
• Salt spray : IEC 512-6, test 11f
• Operating temperature : -40°C to +85°C
ELECTRICAL SPECIFICATIONS
• Max. current/voltage rating with resistive load :
100mA 24VDC - 200.000 cycles
• Initial contact resistance : 100 mΩ max.
• Insulation resistance : 1 GΩ min. at 500VDC
• Dielectric strength : 1.500 Vrms between terminals
MATERIALS
• Case : thermoplastic UL94-V0
• Plunger :
polyamide
• Bushing/bezel : polyamide
• Contacts : silver, gold plated
• Multi-wire lead AWG20,
section 0,6 mm2
• LED wire : AWG26,
section 0,12 mm2
• Lens : polycarbonate
• Terminal seal : epoxy
LED COMPONENT SPECIFICATIONS
LED colour
Forward current
Super red (L0S) 20mA
20mA
20mA
20mA
Typ. forward voltage Max. forward voltage
1,95V
2V
3,2V
3,2V
Yellow (L0Y)
Green (L0G)
Blue (L0B)
1,95V
2,05V
3,70V
4V
A resistor must be series-connected by the user.
Resistor value = supply voltage - LED forward voltage
LED forward current
On flying lead versions, the LED resistor can be integrated by APEM on request.
GENERAL SPECIFICATIONS
• Panel thickness : 8 mm (.314) max.
• Total travel : 2,5 mm (.098) +/- 0,3 mm
• Typical operating force : 5N +/- 2N
• Mechanical life : 200.000 cycles
• Torque : 0,8 Nm max. applied to nut
• Soldering : 320°C max. for 3 sec.
PANEL CUT-OUT MATRIX MOUNTING
(1.063)
27.00
27.00
(1.063)
Ø16.20
(.637)
14.80
(.582)
➀ Flat seal
(.637DIA)
Ø16.20
14.80
(.582)
(.314 max.)
8.00 Maxi
1
UG1006-A
IR series
Sealed pushbutton switches - bushing Ø 16 mm - latching
Overview
B-68 APEM www.apem.com
B
New!
IR
SERIES
Electrical function
1ON - OFF
Actuator colour
1Blue
BDark blue
2Black
3Green
5Yellow
6Red
7White
8Bright chrome
9Orange
ASatin chrome
Contacts
4Silver, gold plated
LED colour
Blank Non-illum.
L0S Super red
L0Y Yellow
L0G Green
L0B Blue
ABOUTTHISSERIES
On the following pages, you will find successively :
model structure of switches and options in the same order as in above chart
Dimensions : first dimensions are in mm while inches are shown as bracketted numbers.
Bushing & bezel finish
2Black (standard)
Other : on request.
Actuator shape
CSquare
RRound, curved
PRound, flat
Terminals
SSolder lugs
FFlying leads
PStraight PC
ZQuick-connect
Mounting accessories : Standard hardware supplied : 1 hex nut 19 mm (.748) across flats and 1 flat seal
Hex nut P/N U4116.
Packaging unit : 25 pieces for flying lead models - 40 pieces for other models
NOTICE : please note that not all combinations of above numbers are available.
Refer to the following pages for further information.
IR series
Sealed pushbutton switches - bushing Ø 16 mm - latching
Round - illuminated
APEM www.apem.com B-69
B
New!
• Four LED colours
• Tin plated LED terminals
• Gold plated contacts
(.094)
2.40
(.330)
8.40
(.110)
2.80
1.20
(.047)
Quick-connect ZStraight P
(.090)
2.30
(.125)
3.20
(.110)
2.80
1.40
(.055)
Solder lug S
Solder lug terminals ➞Flat
Curved actuator
IRR1S4 OFF - ON
Flat actuator
IRP1S4 OFF - ON
MODEL
STRUCTURE
Plunger marking available on IRP models (symbol 12 mm max.). On request.
Sealed flying lead terminals ➞Flat
ACTUATOR COLOUR
1: blue - B: dark blue - 2: black - 3: green - 5: yellow - 6: red - 7: white - 8: bright chrome - 9: orange
A: satin chrome
LED COLOUR
L0S : super red - L0Y : yellow - L0G : green - L0B : blue
BUSHING AND BEZEL FINISH
2: black (standard)
Curved actuator
IRR1F4 OFF - ON
Flat actuator
IRP1F4 OFF - ON
Also available with straight PC terminals : IR•1P4
& quick-connect terminals : IR•1Z4.
Wire colours : black : contact,
red : LED anode (+), blue : LED cathode (-)
OFF ON
(.133)
3.40
1.10X0.50
(.043X.019)
4.20
(.165)
2.00
(.574)
14.60
5.00
24.00 maxi
(.196)
(.944MAX.)
(.078)
Ø16.00x100SI
(.630DIAx100IS)
Ø16.00
(.630DIA)
Ø19.80
(.779DIA)
(.512)
13.00
(19.685±.393)
500.00±10.00
3.20
(.125)
2.00
(.574)
14.60
5.00
17.50
(.196)
(.688)
(.078)
Ø16.00x100SI
(.630DIAx100IS)
Ø16.00
(.630DIA)
Ø19.80
(.779DIA)
(.512)
13.00
(+) (-)
EPOXY
IR series
Sealed pushbutton switches - bushing Ø 16 mm - latching
Round - non-illuminated
B-70 APEM www.apem.com
B
New!
• Gold plated contacts
(.094)
2.40
(.330)
8.40
(.110)
2.80
1.20
(.047)
Quick-connect ZStraight P
(.090)
2.30
(.125)
3.20
(.110)
2.80
1.40
(.055)
Solder lug S
Solder lug terminals ➞Flat
Curved actuator
IRR1S4 OFF - ON
Flat actuator
IRP1S4 OFF - ON
MODEL
STRUCTURE
Plunger marking available on IRP models (symbol 12 mm max.). On request.
Sealed flying lead terminals ➞Flat
ACTUATOR COLOUR
1: blue - B: dark blue - 2: black - 3: green - 5: yellow - 6: red - 7: white - 8: bright chrome - 9: orange
A: satin chrome
BUSHING AND BEZEL FINISH
2: black (standard)
Curved actuator
IRR1F4 OFF - ON
Flat actuator
IRP1F4 OFF - ON
Also available with straight PC terminals : IR•1P4
& quick-connect terminals : IR•1Z4.
(.133)
3.40
1.10X0.50
(.043X.019)
4.20
(.165)
OFF ON
2.00
(.574)
14.60
5.00
24.00 maxi
(.196)
(.944MAX.)
(.078)
Ø16.00x100SI
(.630DIAx100IS)
Ø16.00
(.630DIA)
Ø19.80
(.779DIA)
(.512)
13.00
(19.685±.393)
500.00±10.00
3.20
(.125)
2.00
(.574)
14.60
5.00
17.50
(.196)
(.688)
(.078)
Ø16.00x100SI
(.630DIAx100IS)
Ø16.00
(.630DIA)
Ø19.80
(.779DIA)
(.512)
13.00
EPOXY
IR series
Sealed pushbutton switches - bushing Ø 16 mm - latching
Square - illuminated
APEM www.apem.com B-71
B
New!
• Four LED colours
• Tin plated LED terminals
• Gold plated contacts
(.094)
2.40
(.330)
8.40
(.110)
2.80
1.20
(.047)
Quick-connect ZStraight P
(.090)
2.30
(.125)
3.20
(.110)
2.80
1.40
(.055)
Solder lug S
Solder lug terminals ➞Flat
Curved actuator
IRC1S4 OFF - ON
MODEL
STRUCTURE
Sealed flying lead terminals ➞Flat
ACTUATOR COLOUR
1: blue - B: dark blue - 2: black - 3: green - 5: yellow - 6: red - 7: white - 8: bright chrome - 9: orange
A: satin chrome
LED COLOUR
L0S : super red - L0Y : yellow - L0G : green - L0B : blue
BUSHING AND BEZEL FINISH
2: black (standard)
Curved actuator
IRC1F4 OFF - ON
Also available with straight PC terminals : IRC1P4
& quick-connect terminals : IRC1Z4.
Wire colours : black : contact,
red : LED anode(+), blue : LED cathode (-)
(.133)
3.40
1.10X0.50
(.043X.019)
4.20
(.165)
OFF ON
3.20
(.125)
2.00
(.574)
14.60
5.00
17.50
(.196)
(.688)
(.078)
Ø16.00x100SI
(.630DIAx100IS)
(.512)
13.00
(+) (-)
EPOXY
16.00
(.630SQUARE) 19.80
(.779SQUARE)
2.00
(.574)
14.60
5.00
24.00 maxi
(.196)
(.944MAX.)
(.078)
Ø16.00x100SI
(.630DIAx100IS)
(.512)
13.00
(19.685±.393)
500.00±10.00
16.00
(.630SQUARE) 19.80
(.779SQUARE)
IR series
Sealed pushbutton switches - bushing Ø 16 mm - latching
Square - non-illuminated
• Gold plated contacts
(.094)
2.40
(.330)
8.40
(.110)
2.80
1.20
(.047)
Quick-connect ZStraight P
(.090)
2.30
(.125)
3.20
(.110)
2.80
1.40
(.055)
Solder lug S
Solder lug terminals ➞Flat
Curved actuator
IRC1S4 OFF - ON
MODEL
STRUCTURE
Sealed flying lead terminals ➞Flat
ACTUATOR COLOUR
1: blue - B: dark blue - 2: black - 3: green - 5: yellow - 6: red - 7: white - 8: bright chrome - 9: orange
A: satin chrome
BUSHING AND BEZEL FINISH
2: black (standard)
Curved actuator
IRC1F4 OFF - ON
Also available with straight PC terminals : IRC1P4
& quick-connect terminals : IRC1Z4.
(.133)
3.40
1.10X0.50
(.043X.019)
4.20
(.165)
OFF ON
3.20
(.125)
2.00
(.574)
14.60
5.00
17.50
(.196)
(.688)
(.078)
Ø16.00x100SI
(.630DIAx100IS)
(.512)
13.00
EPOXY
16.00
(.630SQUARE) 19.80
(.779SQUARE)
2.00
(.574)
14.60
5.00
24.00 maxi
(.196)
(.944MAX.)
(.078)
Ø16.00x100SI
(.630DIAx100IS)
(.512)
13.00
(19.685±.393)
500.00±10.00
16.00
(.630SQUARE) 19.80
(.779SQUARE)
www.apem.com APEM B-72
B
New!
