SMD AEC-Q200 Compliant Thick Film Chip Resistor Type CRGCQ Series Key Features Small size and light weight Suitable for both wave and reflow soldering techniques Supplied on tape AEC-Q200 Compliant 7 different package sizes Terminal finish matte Sn over Ni TE Connectivity is pleased to introduce our AEC-Q200 compliant thick film Chip resistor, suitable for auto placement in volume and for most applications. Available in seven different packages and supplied on tape and reel for automatic insertion processes. Standard values - E24 Series Characteristics - Electrical Type Power Rating @ 70C Jumper Rated current Max. Jumper Current Max. Working Voltage Max. Overload Voltage Dielectric Withstand V. Jumper resistance Temperature Range Ambient Temperature Type Power Rating @ 70C Jumper Rated current Max. Jumper Current Max. Working Voltage Max. Overload Voltage Dielectric Withstand V. Jumper resistance Temperature Range Ambient Temperature 1773204-3 CIS WR 03/2018 Dimensions in millimetres unless otherwise specified CRGCQ0402 0.0625W 1A 2A 50V 100V 100V CRGCQ0603 CRGCQ0805 0.1W 0.125W 1A 2A 2A 5A 75V 150V 150V 300V 300V 500V <50m -55C ~ +155C 70C CRGCQ1210 0.5W 2A 10A 200V 500V 500V CRGCQ1206 0.25W 2A 10A 200V 400V 500V CRGCQ2010 CRGCQ2512 0.75W 1W 2A 2A 10A 10A 200V 200V 500V 500V 500V 500V <50m -55C ~ +155C 70C Dimensions Shown for reference purposes only. Specifications subject to change For Email, phone or live chat, go to: www.te.com/help SMD AEC-Q200 Compliant Thick Film Chip Resistor Power derating curve Power rating based on continuous load operation in ambient temperature of 70C. For resistors operated in ambient temperatures above 70C, power rating must be derated in accordance with this curve. Dimensions: Type CRGCQ0402 CRGCQ0603 CRGCQ0805 L 1.000.10 1.600.10 2.000.15 CRGCQ1206 3.100.15 CRGCQ1210 CRGCQ2010 CRGCQ2512 3.100.10 5.000.10 6.350.10 1773204-3 CIS WR 03/2018 Dimensions in millimetres unless otherwise specified W 0.500.05 0.800.10 1.25+0.15 -0.10 1.55+0.15 -0.10 2.600.20 2.500.20 3.200.20 Dimension (mm) H A 0.350.05 0.200.10 0.450.10 0.300.20 0.550.10 0.400.20 B 0.250.10 0.300.20 0.400.20 0.550.10 0.450.20 0.450.20 0.550.10 0.550.10 0.550.10 0.500.25 0.600.25 0.600.25 0.500.20 0.500.20 0.500.20 Dimensions Shown for reference purposes only. Specifications subject to change For Email, phone or live chat, go to: www.te.com/help SMD AEC-Q200 Compliant Thick Film Chip Resistor Construction: Power Rating and Resistance Range: Type Power Rating @ 70C CRGCQ0402 CRGCQ0603 CRGCQ0805 CRGCQ1206 CRGCQ1210 CRGCQ2010 0.0625W 0.1W 0.125W 0.25W 0.5W 0.75W CRGCQ2512 1773204-3 CIS WR 03/2018 Dimensions in millimetres unless otherwise specified 1W Tolerance Jumper 1% 5% Resistance Range <5 10R - 1M 1R0 - 10M Jumper 1% 5% <5 10R - 1M Jumper 1% 5% <5 10R - 1M Jumper 1% 5% <5 10R - 1M Jumper 1% 5% <5 10R - 1M Jumper 1% 5% <5 10R - 1M Jumper 1% 5% <5 10R - 1M Dimensions Shown for reference purposes only. Specifications subject to change 1R0 - 10M 1R0 - 10M 1R0 - 10M 1R0 - 10M 1R0 - 10M 1R0 - 10M Standard Series E24 E96 by negotiation E24 E96 by negotiation E24 E96 by negotiation E24 E96 by negotiation E24 E96 by negotiation E24 E96 by negotiation E24 E96 by negotiation For Email, phone or live chat, go to: www.te.com/help SMD AEC-Q200 Compliant Thick Film Chip Resistor Marking: E24 series 0603 - 2512 3 Digits - first two digits denote significant figures of resistance and third digit denotes number of zeros thereafter. EG 222 = 2K2 Marking for E96 Series 0805 - 2512 4 digits - First three digits denote significant figures of resistance and fourth digit denotes number of zeros thereafter. EG. 1000 For oh i alues elo = 100R R letter R de otes de i al poi t. EG 1R80 = R8 / .8 0402 size chips are not marked 0603 E96 3 digit marking. 1773204-3 CIS WR 03/2018 Dimensions in millimetres unless otherwise specified Dimensions Shown for reference purposes only. Specifications subject to change For Email, phone or live chat, go to: www.te.com/help SMD AEC-Q200 Compliant Thick Film Chip Resistor Marking for E96 series 0603 size with no marking code marked as per E24 values. Performance Specification Characteristics 1773204-3 CIS WR 03/2018 Limits Test Methods Load life %: . %+ . Max. 5%: . %+ . Max. Temperature coefficient R : 400PPM/C <R : 200PPM/C R> : 100PPM/C Short-time overload %: . %+ . Max 5%: . %+ . Max Terminal Bending . %+ . 5 Max Solderability Soldering heat 95% coverage Min. . %+ . 5 Max Moisture Resistance %: 5%: .5%+ . Max. . %+ . Max. Biased Humidity %: 5%: . %+ . Max. . %+ . Max. Dielectric Withstand Voltage No evidence of flashover, mechanical damage, arcing or insulation breakdown Temperature cycling %: 5%: ESD . %+ . 5 Max Sulfuration test %: . %+ . Max. 5%: 5. %+ . Max. Dimensions in millimetres unless otherwise specified .5%+ . Max. . %+ . Max 125C, 35% power, at RCWV or Max. Working Voltage whichever less,1,000 hours .5 hours ON , .5hours OFF , Measurement at 242 hours after test conclusion. (MIL-STD-202 Method 108) Measure between -55C ~+125C 2.5x Rated voltage or Max. Overload Voltage whichever is lower for 5 seconds, then check the resistance. Bending Distance 3mm, Duration: 60s5s, then check the resistance 2453C; 2~3s 2605C; 101s 25C~65C,90~100%RH, 2.5Hr; 65C 90~100%RH, 3Hr; 65C~25C 80~100%RH, 2.5Hr, 10 cycles, Measurement at 24 hours after test conclusion (MIL-STD-202 Method 106) 10% rated power, 85/85%RH, 1000Hr. Measurement at 24 hours after test conclusion. (MIL-STD-202 Method 103) Resistor shall be clamped in the trough of 90 metallic V-block and shall be tested at AC potential respectively specified in the given list of each product type for 60~70s. -553C 30min ~normal temperature 10min-15min~1552C 30min~normal temperature 10min-15min1000 cycles. Measurement at 24 hours after test conclusion. (JESD22 Method JA-104) With the electrometer in direct contact with the discharge tip, verify the voltage setting at levels of 500V, 1KV, 2KV, 4KV, 8KV, The electrometer reading shall be within 10% for voltages from 500V to 800V. (AEC-Q200-002) H2S 3~5PPM 50C2C 91%~93% RH 1000H Dimensions Shown for reference purposes only. Specifications subject to change For Email, phone or live chat, go to: www.te.com/help SMD AEC-Q200 Compliant Thick Film Chip Resistor Packaging Specification Paper taping Type 0402 0603 0805 1206 1210 2010 A 0.2 0.65 1.10 1.65 2.00 2.80 2.80 B 0.2 1.15 1.90 2.40 3.60 3.50 5.40 C 0.05 2.0 2.0 2.0 2.0 2.0 2.0 OD +0.1 -0 1.5 1.5 1.5 1.5 1.5 1.5 E 0.1 1.75 1.75 1.75 1.75 1.75 1.75 F 0.05 3.5 3.5 3.5 3.5 3.5 5.5 G 0.1 4.0 4.0 4.0 4.0 4.0 4.0 W 0.2 8.0 8.0 8.0 8.0 8.0 12.0 T 0.1 0.45 0.67 0.81 0.81 0.75 0.75 OD1 +0.1 -0 1.5 E 0.1 F 0.05 G 0.1 W 0.2 T 0.1 1.75 5.5 4.0 12.0 1.0 Embossed Taping Type A 0.2 B 0.2 C 0.05 2512 3.50 6.70 2.0 OD +0.1 -0 1.5 Peeling strength of cover tape: Test condition: 0.1 to 0.7 N at a peel off speed of 300mm / min. 1773204-3 CIS WR 03/2018 Dimensions in millimetres unless otherwise specified Dimensions Shown for reference purposes only. Specifications subject to change For Email, phone or live chat, go to: www.te.com/help SMD AEC-Q200 Compliant Thick Film Chip Resistor Reel Dimensions (mm): Type Tape 0402 0603 0805 1206 1210 2010 2512 Paper Paper Paper Paper Paper Paper Embossed Reel Qty 10,000 5,000 5,000 5,000 5,000 4,000 4,000 A 0.5 B 0.5 C 0.5 D1 M2 W1 2 2 2 2 2 2 2 13 13 13 13 13 13 13 21 21 21 21 21 21 21 60 60 60 60 60 60 60 178 178 178 178 178 178 178 10 10 10 10 10 13.8 13.8 Label: A. TE Product Number C. Quantity E. RoHS Statement B. Product Description D. Lot Number Example: 1773204-3 CIS WR 03/2018 Dimensions in millimetres unless otherwise specified Dimensions Shown for reference purposes only. Specifications subject to change For Email, phone or live chat, go to: www.te.com/help SMD AEC-Q200 Compliant Thick Film Chip Resistor Environment Related Substance This product complies to EU RoHS directive, EU PAHs directive, EU PFOS directive and Halogen free. Ozone layer depleting substances. Ozone depleting substances are not used in our manufacturing process of this product. This product is not manufactured using Chloro fluorocarbons (CFCs), Hydrochlorofluorocarbons (HCFCs), Hydrobromofluorocarbons (HBFCs) or other ozone depleting substances in any phase of the manufacturing process. Storage Condition The performance of these products, including the solderability, is guaranteed for a year from the date of arrival at your company, provided that they remain packed as they were when delivered and stored at a temperature of 25C 10C and a relative humidity of 60%RH 10%RH, chemical and dust free atmosphere Even within the above guarantee periods, do not store these products in the following conditions otherwise, their electrical performance and/or solderability may be deteriorated, and the packaging materials (e.g. taping materials) may be deformed or deteriorated, resulting in mounting failures. 1. In salty air or in air with a high concentration of corrosive gas, such as Cl2, H2S, NH3, SO2, or NO2 2. In direct sunlight Solder Profile Wave soldering condition: (2 cycles Max.) Pre-heat : 100 ~ 120 , 30 5 sec. Peak temp.: 260 1773204-3 CIS WR 03/2018 Dimensions in millimetres unless otherwise specified Dimensions Shown for reference purposes only. Specifications subject to change For Email, phone or live chat, go to: www.te.com/help SMD AEC-Q200 Compliant Thick Film Chip Resistor Reflow soldering condition: (2 cycles Max.) Pre-heat : 150 ~ 180 , 90 ~ 120 sec. Suggestion solder temp.: 235 ~ 255 , 20 ~ 40 sec. Peak temp.: 260 Hand Soldering condition: The Soldering iron tip should be less than 300C and maximum contact time should be 5 seconds How To Order CRGCQ Common Part CRGCQ - AECQ200 compliant Thick Film Chip Resistor 1773204-3 CIS WR 03/2018 Dimensions in millimetres unless otherwise specified 0603 Size J Tolerance 0402 0603 0805 1206 1210 2010 2512 F - 1% J - 5% 10K Resistance Value oh R K oh Dimensions Shown for reference purposes only. Specifications subject to change K K oh 100K M oh M For Email, phone or live chat, go to: www.te.com/help