North America: Danboro, PA • E-mail: info@pemnet.com • Tel: +1-215-766-8853
Europe: Galway, Ireland • E-mail: europe@pemnet.com • Tel: +353-91-751714
Asia/Pacific: Singapore • E-mail: singapore@pemnet.com • Tel: +65-6-745-0660
Shanghai, China • E-mail: china@pemnet.com • Tel: +86-21-5868-3688
Part # AC-832-1, Floating Self-Clinching Fasteners A4, AS, AC - Unied
more
Locking and Non-locking Threads
These fasteners provide load-bearing threads in thin sheets and permit up to .030” adjustment for mating
hole misalignment.
The self-clinching feature oers fast and simple assembly. The fasteners are squeezed into prepared holes
using any standard press. The sheet remains ush on one side, and the fastener is permanently locked in
place.
Extra strength and support in assembly is obtained by the threads of the oating nut extending fully into
the
Thread Size .164-32 (#8-32)
Thread Type
Non-Locking
Thread Code 832
Shank Code 1
Specications
9/14/2020 | Page 1 of 2
A (Shank) Max.
.038 in
Min. Sheet Thickness .038 in
Hole Size in Sheet + .003 -
.000 .368 in
C Max. .367 in
D Max. .365 in
E ± .015 .440 in
T1 Max. .130 in
Min. Dist. Hole C/L to Edge .34 in
Float .015” minimum, in all directions from center, .030” total
Fastener Material 300 Series Stainless Steel
Fastener Materials - Retainer 300 Series Stainless Steel
Fastener Materials - Nut 300 Series Stainless Steel
Standard Finish - Retainer &
Nut Passivated and/or tested per ASTM A380
For Use in Sheet Hardness1HRB 70 / HB 125 or Less
Thread Specication Internal, ANSI B1.1, 2B
CAD Supplier PennEngineering® (PEM®)
1 HRB - Hardness Rockwell “B” Scale. HB - Hardness Brinell.
9/14/2020 | Page 2 of 2
