15,4 Date Code 13,45 -0,1 Firmensignet 3 -0,1 Ident-Nr. XXXXXXX ERNI 223071 EE-Zone fur durchkontaktierte 2 Ausrichtstreifen 0,5 Locher o0.60.05 compliant zone for thru hole o0.60.05 Alignment strip 2 2 10 x 2 = 20 8 10 x 2 = 20 4x2= 15 11 11.2 Level 3 Ebene 25 1 Ebene - z a 8.2 Ebene - Level 1 b c +0.2 +0.2 +0.2 4.5 0.3 d e 3.7 0.3 f 1 max. 9.7 Level 2 8 A 1 max. P2 B C 50 max. D E P1 F G U 1 Datum plane depth 11 10 9 25 24 23 22 21 20 19 18 17 16 15 8 7 6 5 4 3 K 1 2 R3 z M K M M M K K K K K M K M M M K K K K K K K K K K J K K K K K K K K K K K K K K K K K K K K Bezugsebene Tiefe 13 0.3 contact layout Bestuckungsplan - M K M M M H K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K M K M M M K K K K K M K M M M M K M M M L M a N b R2 c P Q d R e R1 f S T 13 0.2 Lochbild fur Leiterplatte Board hole pattern (Bestuckungsseite) (Component mounting side) 4 10 x 2 = ( 20 ) 4 10 x 2 = ( 20 ) 1) 0.1 2 1) alle Locher all holes +0,05 13 16 0.2 8.3 0.1 0.1 o 0,7 0,02 Bohrungsdurchmesser des Loches o 0,7 0,02 Diameter of drilled hole 1 11 Schichtaufbau im metallisierten Loch siehe Zeichnung 114406 z a b c d e Metal plating of plated-through hole see drawing 114406 Fehlende Masse und Angaben nach IEC 61076-4-101 Missing information and dimensions per IEC 61076-4-101 f 2 Information: R3 Level 1, 3 siehe Bestuckungsplan/ see contact layout Anforderungsstufe 2 / Consider protection memo from DIN 34 4 x 2 = (8) 6.8 o 0,6 0,05 Diameter of finished plated-through hole 2 nicht not plated thru 15 14.5 0.2 o 0,6 0,05 Durchmesser des metallisierten Loches durchkontaktiert 25 5.3 0.1 Tolerances All Dimensions in mm class 2 All rights reserved. Only for information. To insure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Subject to modification without prior notice. Drawing will not be updated. Date Designation ERmet Messerleiste A ERmet Male Wide Type A www.ERNI.com Index 2:1 Scale V:00036497.SZN 223071 ERM A I