MCC TM Micro Commercial Components BZX84C2V4W THRU BZX84C39W omponents 20736 Marilla Street Chatsworth !"# $ % !"# Silicon Features Planar Die construction 200mW Power Dissipation Zener Voltages from 2.4V - 39V Ideally Suited for Automated Assembly Processes . Halogen free available upon request by adding suffix "-HF" 200 mWatt Zener Diodes Mechanical Data Epoxy meets UL 94 V-0 flammability rating Moisture Sensitivity Level 1 Weight: 0.008 grams (approx.) SOT-323 A C Maximum Ratings @ 25oC Unless Otherwise Specified 100 mA Zener Current IF Maximum Forward VF 1.2 V Voltage Power Dissipation P(AV) 200 mWatt (Note 1) Operation And TJ , TSTG -55o C to Storage +150o C Temperature Peak Foreard Surge IFSM 2.0 A Current 8.3mS half NOTES: A. Mounted on 5.0mm2(.013mm thick) land areas. B. Measured on 8.3ms, single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum. B D E H G F I DIMENSIONS DIM A B C D E F G H I INCHES MIN .070 .083 .045 .047 --.006 .035 .002 .010 MM MIN 1.80 2.10 1.15 1.20 --.15 .90 .05 .25 MAX .087 .096 .054 .056 .004 .016 .044 .006 --- MAX 2.20 2.45 1.35 1.40 .10 .40 1.10 .15 --- NOTE Suggested Solder Pad Layout .031 .800 .047 1.20 .024 .600 .118 3.00 .075 1.90 inches mm .026 .650 .026 .650 Revision: C www.mccsemi.com 1 of 5 2013/09/24 MCC BZX84C2V4W thru BZX84C39W TM Micro Commercial Components ELECTRICAL CHARACTERISTICS (TA=25 degree C unless otherwise noted) VF=1.2V max, IF=100mA for all type Type Nimber BZX84C2V4W BZX84C2V7W BZX84C3V0W BZX84C3V3W BZX84C3V6W BZX84C3V9W BZX84C4V3W BZX84C4V7W BZX84C5V1W BZX84C5V6W BZX84C6V2W BZX84C6V8W BZX84C7V5W BZX84C8V2W BZX84C9V1W BZX84C10W BZX84C11W BZX84C12W BZX84C13W BZX84C15W BZX84C16W BZX84C18W BZX84C20W BZX84C22W BZX84C24W BZX84C27W BZX84C30W BZX84C33W BZX84C36W BZX84C39W Marking Code W1/KRB W2/KRC W3/KRD W4/KRE W5/KRF W6/KRG W7/KRH W8/KR1 W9/KR2 WA/KR3 WB/KR4 WC/KR5 WD/KR6 WE/KR7 WF/KR8 WG/KR9 WH/KP1 WI/KP2 WK/KP3 WL/KP4 W M/KP5 WN/KP6 WO/KP7 WP/KP8 WR/KP9 WS/KPA WT/KPB WU/KPC WW/KPD WX/KPE Nominal Zener Voltage Nom. V 2.4 2.7 3 3.3 3.6 3.9 4.3 4.7 5.1 5.6 6.2 6.8 7.5 8.2 9.1 10 11 12 13 15 16 18 20 22 24 27 30 33 36 39 Vz @ IzT Min . V Max. V 2.28 2.52 2.5 2.9 2.8 3.2 3.1 3.5 3.4 3.8 3.7 4.1 4 4.6 4.4 5 4.8 5.4 5.2 6 5.8 6.6 6.4 7.2 7 7.9 7.7 8.7 8.5 9.6 9.4 10.6 10.4 11.6 11.4 12.7 12.4 14.1 13.8 15.6 15.3 17.1 16.8 19.1 18.8 21.2 20.8 23.3 22.8 25.6 25.1 28.9 28 32 31 35 34 38 37 41 Max. Zener Impedance ZzT @ IzT Ohm mA 100 5 100 5 95 5 95 5 90 5 90 5 90 5 80 5 60 5 40 5 10 5 15 5 15 5 15 5 15 5 20 5 20 5 25 5 30 5 30 5 40 5 45 5 55 5 55 5 70 5 80 5 80 5 80 5 90 5 130 5 ZzK @ IzK Ohm mA 600 1 600 1 600 1 600 1 600 1 600 1 600 1 500 1 480 1 400 1 150 1 80 1 80 1 80 1 100 1 150 1 150 1 150 1 170 1 200 1 200 1 225 1 225 1 250 1 250 1 300 1 300 1 325 1 350 1 350 1 Max.Reverse Leakage Current I R @ VR uA V 50 1 20 1 10 1 5.0 1 5.0 1 3.0 1 3.0 1 3.0 2 2.0 2.0 1.0 2.0 3.0 4.0 2.0 4.0 1.0 5 0.7 5 0.5 6 0.2 7.0 0.1 8.0 0.1 8.0 0.1 8.0 0.1 10.5 0.1 11.2 0.1 12.6 0.1 14.0 0.1 15.4 0.1 16.8 0.1 18.9 0.1 21.0 0.1 23.1 0.1 25.2 0.1 27.3 NOTE: 1. Tolerance and Type Number Designation. The type numbers listed have a standard tolerance on the nominal zener voltage of 5%. 2. Specials Available Include: A. Nominal zener voltages between the voltages shown and tighter voltage tolerances. B. Matched sets. 3. Zener Voltage (VZ) Measurement. Guarantees the zener voltage when measured at 90 seconds while maintaining the lead temperature (TL) at 30OC, from the diode body. 4. Zener Impedance (ZZ) Derivation. The zener impedance is derived from the 60 cycle ac voltage, which results when an AC current having an rms value equal to 10% of the dc zener current (IZT or IZK) is superimposed on IZT or IZK. 5. Surge Current (IR) Non-Repetitive. The rating listed in the electrical characteristics table is maximum peak, non-repetitive, reverse surge current of 1/2 square wave or equivalent sine wave pulse of 1/120 second duration superimposed on the test current, IZT, per JEDEC registration; however, actual device capability is as described in Figure 5. www.mccsemi.com Revision: C 2 of 5 2013/09/24 MCC BZX84C2V4W thru BZX84C39W TM Micro Commercial Components 8 100 TEMPERATURE COEFFICIENT,mV / oC) TEMPERATURE COEFFICIENT,mV / oC) 7 6 5 4 3 10 2 1 0 -1 -2 -3 2 3 4 5 6 7 8 9 10 11 1 10 12 100 NOMINAL ZENER VOLTAGE, Volts NOMINAL ZENER VOLTAGE, Volts TYPICAL REVERSE CURRENT STEADY STATE POWER DERATING 1000 TJ=25OC IZ(AC)=0.1IZ(DC) F=1 kHZ IZ = 1 mA FORWARD CURRENT, mA DYNAMIC IMPEDANCE, W 1000 100 5 mA 20 mA 10 100 O 150 C 10 O 75 C 25OC 1 1 10 1 0.4 100 0.5 0.7 0.8 0.9 1.0 1.1 1.2 FORWARD VOLTAGE, Volts NORMAL ZENER VOLTAGE, Volts TYPICAL FORWARD VOLTAGE EFFECT OF ZENER VOLTAGE ON ZENER IMPEDANCE 1.2 1000 0.8 0.6 0.4 PD V.S. TA TA=25oC 0 V BIAS 1 V BIAS 1.0 CAPACITANCE, pF POWER DISSIPATION, Watts 0.6 O 5C 100 BIAS AT 50% OF VZ NOM 10 0.2 0 25 50 75 100 125 150 155 1 TEMPERATURE (oC) STEADY STATE POWER DERATING 1 10 100 NOMINAL ZENER VOLTAGE, Volts TYPICAL CAPACITANCE Revision: C www.mccsemi.com 3 of 5 2013/09/24 MCC BZX84C2V4W thru BZX84C39W TM Micro Commercial Components 100 100 o o TA=25 C 10 ZENER CURRENT, mA ZENER CURRENT, mA TA=25 C 1 0.1 0.01 0 2 4 6 8 10 12 10 1 0.1 0.01 ZENER VOLTAGE, Volts 10 30 50 70 90 ZENER VOLTAGE, Volts ZENER VOLTAGE V.S. ZENER CURRENT ZENER VOLTAGE V.S. ZENER CURRENT LEAKAGE CURRENT (mA) 1000 100 10 1 O +150 C 0.1 0.01 O 0.001 +25 C 0.0001 -55 C 0.00001 O 0 10 20 30 40 50 60 70 80 90 NOMINAL ZENER VOLTAGE, Vlots TYPICAL LEAKGE CURRENT Revision: C www.mccsemi.com 4 of 5 2013/09/24 MCC TM Micro Commercial Components Ordering Information : Device Packing Part Number-TP Tape&Reel: 3Kpcs/Reel Note : Adding "-HF" suffix for halogen free, eg. Part Number-TP-HF ***IMPORTANT NOTICE*** Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are represented on our website, harmless against all damages. ***LIFE SUPPORT*** MCC's products are not authorized for use as critical components in life support devices or systems without the express written approval of Micro Commercial Components Corporation. ***CUSTOMER AWARENESS*** Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. www.mccsemi.com Revision: C 5 of 5 2013/09/24 3