New Product New Introduction Product Introduction NEW! PAN1321i SERIES BLUETOOTH(R) RF MODULE Wireless Bluetooth Connectivity Compatible with Apple(R) and AndroidTM Devices Introducing the NEW PAN1321i Series Bluetooth RF Module compatible with Apple devices such as the iPod(R), iPhone(R) and iPad(R). The PAN1321i Series interfaces with the Apple authentication P coprocessor and supports iPod i 1 Accessory Protocol (iAP) to enable Bluetooth Serial Port data communicationCut the Cable with Bluetooth enabled Apple devices. The PAN1321i Series wireless Bluetooth connectivity also includes compatibility withBluetooth-Module Android, smart phones and PAN1450 most Bluetooth enabled devices2. TM W This New Series of Bluetooth RF Modules is a highly integrated, cost OUTLINES - ENW89803J engineered solution for Bluetooth applications using Serial Port Profile (SPP). The PAN1321i Series is a comprehensive Bluetooth system solution, with an integrated controller, GPIO, AT Command Set Application Program Interface (API), antenna, Bluetooth transceiver, SPP Profile, FCC and IC certifications and Bluetooth end product listing. Using Panasonic's exclusive "tiny footprint" technology, incorporating a Surface Mount Device (SMD) Land Grid Array (LGA) package, the PAN1321i Series is just 15.6 mm by 8.7 mm! A fully shielded case protects the transceiver from nearby RF emitters, simplifying PCB layout. The PAN1321i is qualified to the Bluetooth 2.0 standard. The PAN1450 provides wireless interface per the BT 1.2 specification. Interoperability and BT compliance testing have been completed for the BT Chip ZV4301 from Zeevo, Inc. to facilate rapid time-to-market. TM The BT Chip incorporates a widely popular 32-bit ARM7TDMI CPU core with sufficient bandwidth to support a wide range of embedded Controller applications and the module provides full ARM7 software development access. The PAN1450 is manufactured in a 13,4 x 18,7 x 2,2 mm SMD package and the only external component needed is an 50 ohm antenna. Any customizations for the software can be handled with our recommended partners. FEATURES Product Performance: ODULES M * On-module voltage regulator. External supply 2.7-3.6V * Integrates ARM7TDMI, RAM and patchable 256k EEPROM (for device configuration data and application) B01839 * Based upon Infineon's PMB8753/2 * Reference clock included * Low power clock from internal oscillator or external low power clock User Interfaces - Full-speed USB version 2.0 compliant - Programmable baud rate UART (9,6 Kbps - 921,6 Kbps) - Debug UART (DUART) - 16 General Purpose I/O`s (interruptible) - PCM audio (1 channel) - SPI and JTAG interface Radio Features - High sensitivity design (-86 dBm typ.) - Integrated RF shield - Class 2 module (0dBm typ. output power) - One antenna port TH QUAL OO PR ED Supports iPod Accessory Protocol (iAP) Supported Profiles: RFCOMM, SPP device A and B Complete Bluetooth 2.0 + EDR solution Dimensions: 15.6 x 8.7 x 2.8 mm3 Ultra low power design Certifications: Bluetooth, FCC, CE and IC No external components needed Operating Temperature Range: -40C to +85C IF I * * * * * * * * Overview - Inquiry results with RSSI (1.2) - Adaptive frequency hopping (AFH) enabled (1.2) - High throughput (>600 kbps) - Hold-, Park- and Sniffmode - Up to 128 bit encryption - Audio capability on an SCO channel - Support for very low power modes - sleep and deep sleep - All bluetooth data rates (up to 57,6/723,2Kbps) BLUET IRELESS The NEW PAN1321i is ideal for all applications migrating from USB or RS232 to wireless. The integrated Bluetooth SPP is easily accessed using a simple AT command set. Evaluation and Development Kits are available. ODUCT Design and Specifications are subject to change without notice. Ask the factory for technical specifications before purchase and/or use. If there is any doubt regarding the safety of this product, kindly inform us immediately for technical consultation. PAN1450 Rev. A PAN1321i Part Number: Part Numbers Description ENW-89811A6KF PAN1321i, Bluetooth Module v 2.0, EDR, SPP, with antenna EVAL_PAN1321i PAN1321i Evaluation Kit 1. Apple authentication coprocessor and MFI certification is required. 2. Connectivity requires that devices support Bluetooth Serial Port Profile. Apple, iPod, iPhone and iPad are registered trademarks of Apple Inc. Android is trademark of Google Inc. The Bluetooth(R) word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Panasonic Corporation of North America is under license. Other trademarks and trade names are those of their respective owners. www.panasonic.com/rfmodules piccomponentsmarketing@us.panasonic.com 1-800-344-2112 Copyright (c) 2011 Panasonic Corporation of North America. All Rights Reserved. Specifications are subject to change without notice. Rev 1.0 PAN1321iNPI, FY11-076-XXX New Product New Introduction Product Introduction Block Diagram PAN1321i: Interfaces: The PAN1321i Serial Port Profile Interface supports: * 3.25 MBuad UART * General purpose I/Os with interrupt and wake-up capabilities * JTAG for boundary scan and debug PAN1321i Init Commands * Make Discoverable * Register Local Service * Auto Accept Requests * Connect Request * Send Stream Data * Apple Authentication Lingo PAN1321i Applications: * * * * * * * * Most Wireless Applications Smart Phones Proximity Find Me Heart Rate Monitor Generic I/O HVAC Battery Monitor Compatibility Comparison: Bluetooth RF Module Series Compatibility with Apple devices Compatibility with Android devices PAN1321i * * PAN1321 * Technical Specifications for PAN1321i: Parameter Receiver Sensitivity (BER=10-3) Value -86 dBm Condition / Notes Ideal signal Output Power +3 dBm @ 50 Ohm antenna pin Power Supply 2.7 - 3.6 V Single operation voltage Ultra Low Power Scan 80 uA T = 25C ACL (Transmit 3-DH1) 40 mA Enhanced Data Rate, 531.2 kb/s (1) ACL (Receive 3-DH1) 37 mA Enhanced Data Rate, 531.2 kb/s (1) Operating Temperature Range -40C to + 85C (1) Figure indicates maximum possible data rate with this packet type. Total throughput depends on application and interface setting. Apple, iPod, iPhone and iPad are registered trademarks of Apple Inc. Android is trademark of Google Inc. The Bluetooth(R) word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Panasonic Corporation of North America is under license. Other trademarks and trade names are those of their respective owners. www.panasonic.com/rfmodules piccomponentsmarketing@us.panasonic.com 1-800-344-2112 Copyright (c) 2011 Panasonic Corporation of North America. All Rights Reserved. Specifications are subject to change without notice. Rev 1.0 PAN1321iNPI, FY11-076-XXX